1. DL manuals
  2. Palmgren
  3. Power Tool
  4. 80177
  5. Operating manual & parts list

Palmgren 80177 Operating manual & parts list

Manual is about: 17" FLOOR MODEL DRILL PRESS WITH SINGLE / THREE PHASE

Summary of 80177

  • Page 1

    1 palmgren operating manual & parts list 80177 operating manual & parts list 80177 17" floor model drill press with single / three phase read carefully and follow all safety rules and operating instructions before first use of this product..

  • Page 2

    2 palmgren operating manual & parts list 80177 description palmgren drill presses feature a heavy cast iron base, column collar, work table and head. Work table height is adjustable using rack and pinion. Table can be tilted 45° both right and left, and rotates 360° on a vertical axis. Work table su...

  • Page 3

    3 palmgren operating manual & parts list 80177 work area should be ready for job ● keep work area clean. Cluttered work areas and work benches invite accidents. ● do not use power tools in dangerous environments. Do not use power tools in damp or wet locations. Do not expose power tools to rain. ● w...

  • Page 4

    4 palmgren operating manual & parts list 80177 install the head refer to figure 9/10. Warning: although compact, the drill press head assembly is heavy. Two people are required to mount the drill press head assembly onto the column. ● carefully lift the head above the column and slide it onto the co...

  • Page 5

    5 palmgren operating manual & parts list 80177 green (or green and yellow) conductor in cord is the grounding wire. If repair or replacement of the electric cord or plug is necessary, do not connect the green (or green and yellow) wire to a live terminal. Where a 2-prong wall receptacle is encounter...

  • Page 6

    6 palmgren operating manual & parts list 80177 speed adjustments refer to figures 5 and 8. Warning: be sure drill press is turned off and is disconnected from power source before adjusting speeds. ● to change spindle speed, loosen motor lock handle (ref. No. 187), pivot the motor toward front of dri...

  • Page 7

    7 palmgren operating manual & parts list 80177 ● apply lubricant to rack and pinion gear (figure 7, ref. Nos. 13 & 34) on column and table assembly. Clean motor frequently blow out any dust that may accumulate inside motor. If power cord is worn, cut or damaged in any way, have it replaced immediate...

  • Page 8

    8 palmgren operating manual & parts list 80177 troubleshooting symptom possible causes corrective action spindle does not turn 1. No power to drill press 1. Check wiring, fuse or circuit breaker 2. Defective switch 2. Replace switch 3. Defective motor 3. Replace motor noisy spindle defective bearing...

  • Page 9: Service Record

    9 palmgren operating manual & parts list 80177 service record palmgren 17" floor modle drill press date maintenance performed replacement parts required.

  • Page 10

    10 palmgren operating manual & parts list 80177 notes.

  • Page 11

    11 palmgren operating manual & parts list 80177 notes.

  • Page 12

    12 palmgren operating manual & parts list 80177 figure 7 - replacement parts illustration for base (single & three phase) 41 16 17 20 22 10 13 39 38 7 3 33 25 24 28 29 31 36 34.

  • Page 13

    13 palmgren operating manual & parts list 80177 ref. No. Description part no. Qty. 3 base 9632113.05 1 7 columm holder ass'y 9632114.05 1 10 m10*1.5-40 hex. Hd. Bolt * 4 13 rack 9632179.05 1 16 location pin 9631972.05 1 17 1/4*20unc t=4.7 hex. Nut * 1 20 5/8-11unc-1 hex. Hd. Bolt * 1 22 table lock h...

  • Page 14

    14 palmgren operating manual & parts list 80177 figure 8 - replacement parts illustration for spindle and drive (single & three phase) 189 (~) 190 (3~) 118 (~) 119 (3~) 193 194 105 (~) 106 (3~) 131 132 134 63 137 139 141 126 124 125 128 130 123 122 195 61 146 147 149 150 151 156 153 158 160 163 168 ...

  • Page 15

    15 palmgren operating manual & parts list 80177 replacement parts list for spindle and drive ref. No. Description part no. Qty. Ref. No. Description part no. Qty. 61 feed shaft ass'y 9632140.10 1 160 φ22.5 pulley set nut 9632126.05 1 63 m10*1.5 t=8 hex. Nut * 1 163 v-ribbed belt (poiyourethane) 9632...

  • Page 16

    16 palmgren operating manual & parts list 80177 figure 9 - replacement parts illustration for head (single phase) 43 44 50 57 58 56 55 47 49 54 59 105 61 64 65 66 68 70 71 77 76 83 39 74 81 86 85 79 87 88 89 91 93 94 95 96 45 99 101 100 102.

  • Page 17

    17 palmgren operating manual & parts list 80177 replacement parts list for head (single phase) ref. No. Description part no. Qty. Ref. No. Description part no. Qty. 39 φ2.3-5 drive screw * 4 83 label * 1 43 lead wire ass'y 9600068.00 1 85 hall sensor ass'y 9632042.05 1 44 lead wire ass'y 9600069.00 ...

  • Page 18

    18 palmgren operating manual & parts list 80177 figure 10 - replacement parts illustration for head (three phase) 51 43 44 46 48 49 54 55 56 58 57 59 70 71 66 68 64 65 61 39 199 83 81 77 76 86 85 79 87 88 89 91 93 94 95 96 45 99 100 101 109 110 113 112 111 114 98 102 106.

  • Page 19

    19 palmgren operating manual & parts list 80177 replacement parts list for head (three phase) ref. No. Description part no. Qty. Ref. No. Description part no. Qty. 39 φ2.3-5 drive screw * 4 83 label * 1 43 lead wire ass'y 9600068.00 2 85 hall sensor ass'y 9632042.05 1 44 lead wire ass'y 9600069.00 2...

  • Page 20

    20 palmgren operating manual & parts list 80177 warranty palmgren warrants their products to be free of defects in material or workmanship. This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, failure to properly maintain the product, heated, ground...