1. DL manuals
  2. Palmgren
  3. Power Tool
  4. 80207
  5. Operating manual & parts list

Palmgren 80207 Operating manual & parts list

Manual is about: 20" HEAVY DUTY FLOOR MODEL DRILL PRESS

Summary of 80207

  • Page 1

    Operating manual & parts list 80207 20″ heavy duty floor model drill press read carefully and follow all safety rules and operating instructions before first use of this product. 32000.19-1010

  • Page 2

    Description palmgren drill presses feature a heavy cast iron base, column collar, work table and head. Work table height is adjustable using rack and pinion. Table can be tilted 45° both right and left, and rotates 360° on a vertical axis. Work table surface is precision ground and features t-slots ...

  • Page 3

    3 • wear face mask or dust mask if cutting operation is dusty. • be alert and think clearly. Never operate power tools when tired, intoxicated or when taking medications that cause drowsiness. Work area should be ready for job • keep work area clean. Cluttered work areas and work benches invite acci...

  • Page 4

    4 • open cover of pulley housing (fig. 9, ref. No. 2) and insert cen- ter pulley assembly (fig. 8, ref. No. 9) into the head casting. • choose a speed from figure 5 or the pulley housing speedchart and connect spindle pulley to center pulley with front drive belt (fig. 8, ref. Nos. 2, 8 and 9). Conn...

  • Page 5

    Extension cord length (120 volts) wire size a.W.G. Up to 25 ft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 25-50 ft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 note: ...

  • Page 6

    • rotate spindle until inner slot is aligned with outer slot. You will see through spindle when slots are properly aligned. • insert the drift key (ref. No. 51) into the slots and tap lightly with hammer. The arbor and chuck will drop from spindle. Digital display panel refer to figure 6. • display ...

  • Page 7

    7 palmgren operating manual & parts list 80207 symptom spindle does not turn noisy spindle noisy operation bit burns or smokes excessive drill runout or wobble drill bit binds in workpiece possible causes 1. No power to drill press 2. Defective switch 3. Defective motor defective bearings 1. Incorre...

  • Page 8: Service Record

    8 service record palmgren 20 ″ floor model drill press date maintenance performed replacement parts required palmgren operating manual & parts list 80207.

  • Page 9

    9 palmgren operating manual & parts list 80207 notes.

  • Page 10

    11 19 10 8 12 18 6 5 4 15 16 17 7 21 20 13 14 2 3 9 1 10 figure 7 - replacement parts illustration for base palmgren operating manual & parts list 80207.

  • Page 11

    11 palmgren operating manual & parts list 80207 replacement parts list for base ref. Part number for: no. Description 80207 qty. 1 base 31635.00 1 2 8-1.25 x 125mm hex head bolt * 4 3 8mm flat washer * 8 4 8mm lock washer * 4 5 8-1.25mm hex nut * 4 6 12-1.75 x 45mm socket head bolt * 5 7 column asse...

  • Page 12

    6 6 49 34 35 39 38 33 31 30 32 7 8 9 10 11 12 13 22 20 21 25 29 26 28 27 24 47 43 4 5 45 53 53 44 46 50 51 52 42 41 40 37 36 23 2 1 3 19 18 17 16 14 15 48 12 palmgren operating manual & parts list 80207 figure 8 - replacement parts illustration for spindle and drive.

  • Page 13

    13 palmgren operating manual & parts list 80207 ref. No. Description part no. Qty. 1 spindle nut 32001.00 1 2 spindle pulley 32002.00 1 3 spindle sleeve 32003.00 1 4 plate 32035.00 1 5 6-1.0 x 8mm cheese head screw 32251.00 2 with flat washer 6 6206zz ball bearing 20006.00 2 7 spacer 32006.00 1 8 fr...

  • Page 14

    14 palmgren operating manual & parts list 80207 figure 9 - replacement parts illustration for head 35 23 14 13 29 36 20 30 4 39 7 6 9 8 28 43 5 3 2 1 22 33 34 26 11 37 46 44 42 12 27 32 38 25 21 31 41 47 19 18 17 15 16 24 40 10 45.

  • Page 15

    Ref. No. Description part no. Qty. 1 knob assembly 32037.00 1 2 pulley housing 32038.00 1 3 clamp 32039.00 1 4 foam 32040.00 1 5 grommet 32041.00 1 6 speed sensor assembly 32042.00 1 7 5-0.8 x 10mm pan head screw * 2 8 5mm flat washer * 2 9 bracket 32043.00 1 10 4mm flat washer * 2 11 4-0.7 x 10mm s...

  • Page 16

    Warranty palmgren warrants their products to be free of defects in material or workmanship. This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, failure to properly maintain the product, heated, ground or otherwise altered, or used for a purpose oth...