Palmgren 82401 Operating Manual & Parts List - page 2
DESCRIPTION
Palmgren Belt Grinders are used for grinding, deburring, squaring,
polishing and finishing metals, woods and plastics. Belt grinders
have totally enclosed, fan-cooled direct drive motors. Belt housing
swivels from vertical to horizontal for grinding long workpieces.
Features include a fully adjustable tool rest, quick release belt ten-
sion and tracking mechanism, OSHA compliant safety guard with
dust collection port and easy opening side door for belt changes.
UNPACKING
Check for shipping damage. If damage has occurred, a claim must
be filed with the carrier immediately. Check for completeness.
Immediately report missing parts to dealer.
The grinder comes assembled as one unit. Additional parts which
need to be fastened to grinder should be located and accounted
for before assembling.
A Stop rod with hex nut
B Bracket
C Tool rest
D 3/8 x 16 x 1/2” Knob with flat washer
E 5/16-18 x 1“ Knob with flat washer
F 12mm Open end wrench
G 6mm Hex wrench
SPECIFICATIONS
82401 - 1” Belt Grinder
Belt size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 x 42”, 80 grit
Belt platen area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 x 1
1
⁄
2
”
Belt speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1800 FPM
Dust collection chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2” diameter
Dimensions (L x W x H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 x 16 x 24”
Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DP, Locking rocker
Motor . . . . . . . . . . . . . . . . . . . .1/2 Hp, 115/230V, 5/2.5 AMPS, 1725 RPM
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 lbs
82402 - 2” Belt Grinder
Belt size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 x 48”, 80 grit
Belt platen area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
1
⁄
4
x 2
1
⁄
2
”
Belt speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4500 FPM
Dust collection chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2” diameter
Dimensions (L x W x H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 x 16
1
⁄
2
x 26”
Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DP, Locking rocker
Motor . . . . . . . . . . . . . . . . . . . .3/4 Hp, 115/230V, 7/3.5 AMPS, 3450 RPM
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 lbs
82404 - 4” Belt Grinder
Belt size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 x 36”, 80 grit
Belt platen area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3
⁄
8
x 4
1
⁄
2
”
Belt speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3600 FPM
Dust collection chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2” diameter
Dimensions (L x W x H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 x 20 x 21”
Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DP, Locking rocker
Motor . . . . . . . . . . . . . . . . . . . .3/4 Hp, 115/230V, 7/3.5 AMPS, 3450 RPM
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 lbs
SAFETY RULES
WARNING:
For your own safety, read operating instructions man-
ual before operating tool.
CAUTION:
Always follow proper operating procedures as defined in
this manual even if you are familiar with use of this or similar tools.
Remember that being careless for even a fraction of a second can
result in severe personal injury.
WARNING:
Some dust created by power sanding, sawing, grind-
ing, drilling and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry
products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures vary, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area and work with approved safety
equipment. Always wear OSHA/NIOSH approved, properly fitting
face mask or respirator when using such tools.
BE PREPARED FOR JOB
• Wear proper apparel. Do not wear loose clothing, gloves, neck-
ties, rings, bracelets or other jewelry which may get caught in
moving parts of machine.
• Wear protective hair covering to contain long hair.
• Wear safety shoes with non-slip soles.
• Wear safety glasses complying with United States ANSI Z87.1.
Everyday glasses have only impact resistant lenses. They are
NOT safety glasses.
• Wear face mask or dust mask if operation is dusty.
• Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
PREPARE WORK AREA FOR JOB
• Keep work area clean. Cluttered work areas and work benches
invite accidents.
• Do not use power tools in dangerous environments. Do not use
power tools in damp or wet locations. Do not expose power
tools to rain.
• Work area should be properly lighted.
• Proper electrical plug should be plugged directly into properly
grounded, three-prong receptacle.
• Extension cords should have a grounding prong and the three
wires of the extension cord should be of the correct gauge.
• Keep visitors at a safe distance from work area.
• Keep children out of the workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to pre-
vent any unintentional use of power tools.
TOOL SHOULD BE MAINTAINED
• Always unplug tool prior to inspection.
• Consult manual for specific maintaining and adjusting proce-
dures.
2
Palmgren Operating Manual & Parts List
82401, 82402 & 82404
Figure 1 – Unpacking
A
B
D
E
F
G
C