Summary of PA-500
Page 1
Pa-500 hardware reference guide.
Page 2: Contact Information
Contact information http://www.Paloaltonetworks.Com/contact/contact/ about this guide this guide describes the pa-500 firewall hardware, provides instructions on installing the hardware, describes how to perform maintenance procedures, and provides product specifications. This guide is intended for ...
Page 3: Table of Contents
Palo alto networks table of contents • 3 february 29, 2016 - palo alto networks company confidential chapter 1 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4
4 • table of contents palo alto networks bsmi emc statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.
Page 5: Chapter 1
Palo alto networks overview • 5 february 29, 2016 - palo alto networks company confidential chapter 1 overview this chapter describes the front and back panels of the pa-500 firewall. For more information, refer to the following topics: • “front panel” in the next section • “back panel” on page 7.
Page 6: Front Panel
Front panel 6 • overview palo alto networks front panel figure 1 shows the front panel of the pa-500 firewall. Figure 1. Front panel table 1 describes the front panel features. Table 1. Front panel features item description ethernet ports 8 rj-45 10/100/1000 ports for network traffic. Management por...
Page 7: Back Panel
Palo alto networks overview • 7 back panel back panel figure 2 shows the back panel of the pa-500 and table 2 describes the back panel features. Figure 2. Back panel table 2. Back panel features item description fans two fans for cooling the device. Power inlet ac power inlet for powering the device...
Page 8
Back panel 8 • overview palo alto networks.
Page 9: Chapter 2
Palo alto networks installing the hardware • 9 february 29, 2016 - palo alto networks company confidential chapter 2 installing the hardware this chapter describes how to install the pa-500. For more information, refer to the following topics: • “tamper proof statement” on page 9 • “before you begin...
Page 10: Equipment Rack Installation
Equipment rack installation 10 • installing the hardware palo alto networks • allow clear space on the sides and back of the firewall. Equipment rack installation figure 3 shows how rack mounting brackets are attached to the pa-500. You can attach the brackets using the holes at the front of the uni...
Page 11: Connecting Power
Palo alto networks installing the hardware • 11 connecting cables to the device to install the pa-500 in a grounded 19-inch rack: 1. Screw the rack mounting brackets onto the front of the unit using a phillips head screwdriver. 2. Lift the device and position it in the rack. 3. Align the mounting ho...
Page 12
Connecting power 12 • installing the hardware palo alto networks.
Page 13: Chapter 3
Palo alto networks maintaining the hardware • 13 february 29, 2016 - palo alto networks company confidential chapter 3 maintaining the hardware this chapter provides maintenance information for the pa-500 hardware. For more information, refer to the following topics: • “cautions and warnings” in the...
Page 14: Interpreting The Device Leds
Interpreting the device leds 14 • maintaining the hardware palo alto networks • removal of equipment top cover is to be performed only by trained service person(s). The only exception is to perform a memory upgrade as described in the pa-500 memory upgrade procedures located on the platforms page. I...
Page 15: Interpreting The Port Leds
Palo alto networks maintaining the hardware • 15 interpreting the port leds interpreting the port leds each ethernet port on the pa-500 has two leds. Table 4 describes the leds. Table 4. Port leds led description left shows green if there is a network link. Right blinks if there is network activity..
Page 16
Interpreting the port leds 16 • maintaining the hardware palo alto networks.
Page 17: Chapter 4
Palo alto networks specifications • 17 february 29, 2016 - palo alto networks company confidential chapter 4 specifications this chapter provides specifications for the pa-500. For more information, refer to the following topics: • “physical specifications” in the next section • “interface specifica...
Page 18: Interface Specifications
Interface specifications 18 • specifications palo alto networks interface specifications table 6 describes the interfaces for the pa-500. Electrical specifications table 7 lists the electrical specifications for the pa-500. Environmental specifications table 8 lists the environmental specifications ...
Page 19: Chapter 5
Palo alto networks compliance statements • 19 february 29, 2016 - palo alto networks company confidential chapter 5 compliance statements this section lists the hardware compliance statements for the following: • “vcci” in the next section • “bsmi emc statement” on page 19 vcci this section provides...
Page 20
Bsmi emc statement 20 • compliance statements palo alto networks bsmi emc 聲明 警告使用者 : 這是甲類的資訊產品 , 在居住的環境中使用時 , 可能會造成射頻干擾 , 在這種情況下 , 使用者會被要求採取某些適當的對策 製造商：偉創力國際 原產地：美國 / 部份零組件產地為美國及其它國家。 輸入頻率：50-60 赫茲（hz） 輸入電壓（ac）：100 〜 240 伏特.