1 unflued portable convection room heater customer operating and installation instructions thank you for purchasing a paloma/rheem convection gas space heater 1. To operate this appliance safely and correctly, please read these instructions thoroughly. 2. This appliance must be installed in accordan...
2 please record below your retailer: ………………………………………………………………………………….. Address: ……………………………………………………………………………………….. Phone: …………………………………………………………………………………………. Date of purchase: ……………………………………………………………………………. Invoice number: ...............................................................................
3 general design layout product overview control panel carry handle use when carrying the heater warning label rating plate shows model no. Gas type, month of manufacture warm air inlet warm air is discharged. Louvre air filter (1) prevents dust entering the appliance. Gas hose electric plug air fil...
4 control panel infrared remote controller set off button on off down up timer 2 button over-ride button timer1 button temp adjustment button on button 1 timer 2 override ( ) battery replacement (aaa size 1.5v 2 pieces) (1) remove access panel. (2) ensure that batteries are correctly fitted. (3) rep...
5 as4553 efficiency star rating of 5.9 stars. One touch on / off button. Electronic ignition. Adjustable room temperature - you can adjust the room temperature by pressing the up and down arrows on the control panel. Dual timers – the heater can be set to operate automatically at two separate period...
6 model pjc-w25fr, pjc-s25fr, pjc-c25fr rac-w25fr, rac-s25fr, pjc-c25fr pjc-w18fr, pjc-s18fr space heater type convection heater convection heater gas input - ng high (mj/h) 25 18 low (mj/h) 9 9 gas input - lpg high (mj/h) 23 18 low (mj/h) 8.2 8.2 output (kw) 6.1 4.7 as4553 effeciency star rating 5....
7 external dimensions (mm) (1) remove heater from carton. (2) please ensure that the gas specified on the rating plate matches your gas supply. Using a different type of gas may cause an explosive ignition resulting in injury, damage to heater or malfunction of the oxygen depletion safety system. Do...
8 if a gas leak is detected: do not turn power switches on or off. Do not plug or unplug electrical appliances. Do not use the telephone. Flame or sparks may ignite the gas and cause a fire: cease operation immediately and close the gas valve. Open windows and doors for ventilation. Contact your gas...
9 do not use this heater in areas where spray painting is taking place or in areas such as hairdressers where there may be lots of fluff and dust or where aerosols may be used. All replacement parts must be approved paloma spare parts. This heater may circulate large volumes of air. If the air in th...
10 this heater must be installed with a minimum clearance of 50mm from the rear and sides. These clearances must be maintained at all times. There must be a minimum clearance of 750mm from the hot air outlet. Do not install in a room with inadequate ventilation – refer to australian standard as5601....
11 before you begin ensure that the gas hose connector and electrical cord are plugged in correctly. Start up press the on / off button once to start the heater and the operation light (green) will light up. After a short delay the combustion light (red) will light up, this indicates proper ignition...
12 automatic economy operation the economy operation allows the heater to heat the room to the set temperature and after a period of 30 minutes it allows the temperature to automatically reduce by one degree. After another 30 minutes the temperature is reduced by a further one degree to a maximum of...
13 over-ride function the over-ride function allows the user to manually over-ride the preset program to operate the heater. [press over-ride button] over-ride operation is switched on: the over-ride light glows after combustion the on / off light glows red. Set temperature and room temperature will...
14 setting the clock press on / off button. On / off light glows the set temp and room temp are displayed on the screen. Press set times button time is displayed. Adjust the time to adjust the time of day press the ▼ down or ▲ up button until the correct time is reached. [example] to set clock for 1...
15 programming the on / off timer(s) two timers are available – timer 1 and timer 2. You are able to set the start time and shutdown time for timer 1 and timer 2. Programming the timer before programming the timers, please ensure that the correct time is set. Press on / off button on / off light glo...
16 press set times button to set timer 2 timer 2 “on” light flashes. Timer 2 “on” time is displayed on the screen. Adjust timer 2 “on” time as required to set the timer 2 “on” time press the ▼ down or ▲ up button until the correct time is reached. Example] to set the timer 2 “on” time to 8:10pm. (1)...
17 press on / off button to turn off on / off lamp lights the current time will be shown on the screen. Caution the operation and shut down times for the timers are stored in memory. If the requested operation and shut down times for the timers are the same it is not necessary to set up anew. To com...
18 operation of timers this section provides timer operation via the unit, but it is possible to control the timers by using the remote control. Please ensure that the main power is on while main power is on. On / off light glows green or glows red after ignition. Please ensure the timer‟s are progr...
19 [timer operation shut down time] selected timer‟s [on] [off] light glows. Combustion shut down and the heater stands by for timer operation. On / off light glows green. Cancelling the timers: press on / off button or off switch on remote control or press the timer button. To manually cancel the t...
20 please check following important points before calling for a service technician: condition suggested remedy check that the power cord is plugged in and the power turned on circuit breaker or fuse is blown child lock is set check that gas is turned on see that enough gas is left in lpg tank (in ca...
21 these heaters are fitted with self diagnostics electronics. Should a fault occur the heater will shut down and the fault with a pair of digits will be displayed in the display screen. Refer to the following table for probable cause and suggested remedy . Error code problem probable cause suggeste...
22 disconnect gas hose and turn heater off. Unplug and wait until the heater cools down. Be sure to carry out daily inspection and maintenance. Do not use the heater if you believe something is wrong. It is recommended that your heater be serviced periodically. Points to check 1. There are no flamma...
23 maintenance of the louvre use a vacuum cleaner to remove dirt from the louvre. Make sure that the fan is not working before cleaning. White powder may form on the louvre. Wipe off with soft cloth. Caution do not press the louvre heavily. Do not apply strong pressure to the louvre. The louvre may ...
24 rheem australia has a service and spare parts network in all states. Our service network personnel are fully equipped to give the best service on your paloma gas heater. If your heater requires a service or repairs please contact rheem national service. Do not return heater to place of purchase. ...
