1. DL manuals
  2. Palsonic
  3. CRT TV
  4. 3410
  5. Owner's Manual

Palsonic 3410 Owner's Manual - Contents

Manual is about: 34CM CORDLESS REMOTE COLOUR TELEVISION

Summary of 3410

  • Page 1

    Palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel:(02)9313 7111 fax:(02)9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia:1300 657 888 34cm cordless remote colour television model: 3410 owner's manual type tested electrical safety as/nzs 3250 lic...

  • Page 2: Contents

    Congratulations on your purchase of this palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents main f...

  • Page 3

    . . . . . . . . . . . Main features hyperband. Auto/manual search. Voltage synthesised system 100 preset channels. Tv system: pal-b/g, ntsc-4.43/3.58 (av). Full function remote control & english on screen menu display no-signal blue background display and auto-power-off function. Four picture mode s...

  • Page 4

    Notes for operation * do not let the tv set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

  • Page 5

    Installation and appearance antenna connection to ensure a bright-coloured and clear picture, you should use an outdoor aerial or catv cable. If the signals are strong enough, you may use an indoor aerial. Note: when you connect the outdoor aerial cable to the aerial terminal on the tv set, please t...

  • Page 6

    Appearance front view power switch remote sensor indicator note: functions of menu, , vol , ch and tv/av are also provided to the remote controller. Back view av in/out antenna input 5 ch (up) ch (down) menu tv/av vol (down) vol (up).

  • Page 7

    The remote controller standby channel direct select sleep timer picture mode selection *sound system select previous channel on screen recall colour system select picture control volume control channel select * note: this tv model's rf sound system is bg only. Therefore the sys1/2 button on the remo...

  • Page 8

    Press again operation turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right co...

  • Page 9

    8 1. Picture menu making use of the picture menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the ch button to select the item (the selected item is highlighted in red). Press the vol button to adjust it. The ra...

  • Page 10

    Making use of the preset menu can fulfil the function of auto-search, search. Manual search , channel and band selection. Aft and skip on/off. Press ch button to select the item. (the selected item is highlighted in red). Press the menu button to exit to the main menu. 1) prog (program) select the c...

  • Page 11

    5) sys (sound system) this item is used to select sound system. Since this tv model’s rf sound system is b/g only, this item gets into ineffectiveness in sound system selection. 6) auto - search (auto) press ch button to highlight auto. Press vol button the set will automatically search and store th...

  • Page 12

    2) sys (sound system) selection. In this tv model this item is ineffective. (refer to the note on page 6) 3) blue on/off selection. Select and highlight blue on/off. Press vol button to select on or off. When "blue on" is selected, blue background will appear on the screen automatically when no inpu...

  • Page 13: L..........

    L.......... Press " " press " " brightness 0 picture and volume adjustment 1. Picture adjustment press pic button repeatedly, on-screen display will change in the sequence below pal brightness contrast colour sharpness ntsc brightness contrast colour tint sharpness press vol button to adjust the lev...

  • Page 14: Llllll......

    13 mild picture mode selection you can select the picture quality instantly among three presets modes and one user-set mode. Press the button to select the desired picture quality. Dynamic, standard, mild and memory (user-set) can be selected cyclically. Memory dynamic standard brightness colour con...

  • Page 15

    : 14 colour system colour sub-carrier vertical frequency pal (rf/video) 4.43mhz 50hz auto ntsc 3.58 (video) 3.58mhz 60hz 50hz pal pal 60 (video) n358 ntsc 3.58 (video) 4.43mhz 4.43mhz 3.58mhz 60hz 60hz pal (rf/video) ntsc 4.43 (video) 4.43mhz 60hz n443 3. Sleep timer using the sleep button allows yo...

  • Page 16

    15 note: 1) when receiving broadcasting tv program (the tv signals are input through aerial terminal), press the av button to switch the set to tv mode. 2) when receiving programs played back by video disc, vcr, satellite receiver, vcd (the signals are input through av terminals), please set the rec...

  • Page 17

    Press av button on the remote control unit to set tv mode, and choose the desired channel. At this time, the program recorded is displayed on the screen. Note: the following mis-operation should be avoided during recording. * press standby button or set to video mode. * change the current channel ac...

  • Page 18

    Press av button on the remote control unit to select av mode before dubbing, "av" will be displayed on the screen. The tv set will act as a monitor to help you edit while dubbing. Note: the set must remain in video mode and must not be switched off during the session. 17 3. Dubbing the picture below...

  • Page 19

    Trouble shooting symptoms check these things try these adjustment no picture, no sound. Be sure power cord is plugged in. May be station trouble. Check antenna connections. Maybe in av mode. Press power button try another channel. Press av button once. Poor sound, picture ok. May be station trouble....

  • Page 20

    Specifications power supply receiver channel cable channel tv system dimension (mm) weight crt power consumption antenna impedance remote control unit power supply accessories note : design and specifications are subject to change without notice. : ac 240v, 50hz : vhfl 0~5, 5a; vhfh 6~11; uhf e21-e6...

  • Page 21

    Palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel:(02)9313 7111 fax:(02)9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia: 1300 657 888 604-37h03-09.