1. DL manuals
  2. Palsonic
  3. CRT TV
  4. 6158
  5. Owner's Manual

Palsonic 6158 Owner's Manual

Manual is about: 61CM CORDLESS REMOTE COLOUR TELEVISION

Summary of 6158

  • Page 1

    Palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel:(02)9313 7111 fax:(02)9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia:1300 657 888 61cm cordless remote colour television model: 6158 owner's manual type tested electrical safety as/nzs 3250 lic...

  • Page 2: Contents

    Congratulations on your purchase of this palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents main f...

  • Page 3

    . . . . . . . . . Main features hyperband. Auto/manual search. 100 preset channels. Multi-system: pal-b/g, ntsc-4.43/3.58 (av). No-signal blue background display and auto-power-off function. Four picture mode settings. Sound mute function. Sleep timer. Av in/out, s-vhs operation function. 2.

  • Page 4

    Notes for operation * do not let the tv set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

  • Page 5

    Installation and appearance antenna connection to ensure a bright - coloured and clear picture, you should use an outdoor aerial or catv cable. If the signals are strong enough, you may use an indoor aerial. Note: when you connect the outdoor aerial cable to the aerial terminal on the tv set, please...

  • Page 6

    Ch (up) ch (down) appearance front view back view 5 antenna input av out (video, audio l/mono r) av2 in (video, audio l/mono r) s-vhs in av1 in (video, audio l/mono r) indicator indicator remote sensor menu tv/av power switch vol+ (up) vol- (down).

  • Page 7

    The remote controller standby channel direct select sleep timer picture mode selection *sound system select previous channel on screen recall colour system select picture control volume control channel select * note: this tv model's rf sound system is bg only. Therefore the sys1/2 button on the remo...

  • Page 8

    Operation turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the ...

  • Page 9

    8 2. Preset menu prog 28 sys 1 skip off auto aft on search band u manual 1. Picture menu making use of the picture menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the ch button to select the item (the selected...

  • Page 10

    Making use of the preset menu can fulfil the function of auto-search, search. Manual search , channel and band selection. Aft and skip on/off. Press ch button to select the item. (the selected item is highlighted in red). Press the menu button to exit to the main menu. 1) prog (program) select the c...

  • Page 11

    10 3. Function menu std auto blue on making use of the function menu can select blue on/off and current channel’s colour and sound system. Sys 1 6) auto - search (auto) press ch button to highlight auto. Press vol button the set will automatically search and store the active tv signals in your local...

  • Page 12

    Press ch button to select item (the selected item is highlighted). Press menu button to exit to the main menu. 1) std (colour system) selection. In this tv model the colour system is automatically identified. In normal circumstances, please set colour system to auto. 2) sys (sound system) selection....

  • Page 13: Llllll......

    You can press the button to mute the sound. Press the button again or vol button. The sound is restored to normal. 2. Volume adjustment you can press the vol button to adjust the volume, and the green bar will move rightward or leftward, the volume output range is 0-63. Sound mute mode normal sound ...

  • Page 14

    13 press the button and the upper right corner will display the current channel number and tv system. After 4 seconds the display on the screen will disappear. Other functions 1. Retain on-screen display in video mode, it will only display video l (or video 2) and the colour system. 2. Tv colour sys...

  • Page 15

    14 3. Sleep timer using the sleep button allows you to have the appliance automatically turned off after a preset time (the time range will be as long as 120 minutes) , and set the appliance to standby mode. At every press of the button the setting time will be decreased by 30 minutes. When the rema...

  • Page 16

    15 note: s-vhs in and av2 use the same interface. If you want to receive signals input through s-vhs terminal, switch the set to av2, the s-vhs (s-video) input terminal has priority over the av2 video terminal; to use equipment connected to the av2 video in terminal, disconnect any plug from the s-v...

  • Page 17

    External equipment connection this set is incorporated with audio & video input and output terminals which allows direct connection to external equipments (such as vcr, video disc, vcd, satellite receiver etc.) for playing back and recording the programs. 1. Video playback if your video equipment ha...

  • Page 18

    2. Recording 2.1 according to the following figure connect the tv set to the vcr. (y) yellow (video) (w) white (audio, l/mono) (r) (audio, r) 2.2 when recording, set the tv on the desired channel, the program recorded is the program displayed on the screen. 17.

  • Page 19

    Troubleshooting symptoms the set cannot be turned on, red indicator is off poor colour, poor tint spots appear on the screen stripes appear on the screen double images or "ghosts" snowy picture the remote controller does not work check the following items be sure the power cord is plugged in or the ...

  • Page 20

    Specifications power supply: receiving channel: tv system: dimension(mm): weight: crt: power consumption: antenna impedance: sound output: accessories: note : design and specifications are subject to change without notice. Ac 240v, 50hz vhfl 0~5, 5a; vhfh 6~11; uhf e21-e69 pal-b/g, pal-60, ntsc 3.58...

  • Page 21

    Palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel:(02)9313 7111 fax:(02)9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia: 1300 657 888 604-25703-0