1. DL manuals
  2. Palsonic
  3. Telephone
  4. MODEL 5910PF
  5. Owner's Manual

Palsonic MODEL 5910PF Owner's Manual

Summary of MODEL 5910PF

  • Page 1

    Palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel:(02)9313 7111 fax:(02)9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia:1300 657 888 59cm cordless remote colour television model: 5910pf owner's manual type tested electrical safety as/nzs 3250 l...

  • Page 2

    . . . . . . . . . 1. Digital colour transient improver (cti) enhance the tint and make the original picture brighter and fresher 2. 3h digital comb filter to attain the complete separation of brightness and colour signals. To reduce colour interface, blurry and dotted interruptions. To make the pict...

  • Page 3: Contents

    Congratulations on your purchase of this colour pure flat hi -vision palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future refer...

  • Page 4

    Notes for operation * do not let the tv set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

  • Page 5

    Installation and appearance antenna connection to ensure a bright - coloured and clear picture, you should use an outdoor aerial or catv cable. If the signals are strong enough, you may use an indoor aerial. Note: when you connect the outdoor aerial cable to the aerial terminal on the tv set, please...

  • Page 6

    Appearance front view back view 4 note: functions of menu, tv/av, sys, ch , vol are also provided to the remote controller. Antenna input monitor output terminals {video, audio l/mono, r} (1) video 1 input terminals {s-video, video, audio l/mono, r} (2) video 2 input terminals {s-video, video, audio...

  • Page 7

    The remote controller 5.

  • Page 8

    1. Push the main power switch on, if the set is in standby mode, the power indicator is red; if there are pictures appearing on the screen, the indicator is yellow. 2. If no picture appears on the screen, push the power button on the remote controller to turn the set on, the indicator turns to yello...

  • Page 9

    1.3 press the or button to enter into the sub-menu of presetting the channels there are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. 1. To enter into menu 1.1 press the menu...

  • Page 10

    3. Manual search if auto - search cannot preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers - please make use of manual search. Press the menu item select button or to select manual search (the caption on the screen are red). Press t...

  • Page 11

    When you want to store and memorise another channel with another position, repeat steps 3.3, 3,4. After presetting the channels, you can skip unwanted program numbers to select your desired channels. Repeat steps 3.1 to 3.3 to select the unwanted pro- gram position of the unwanted channels . Press t...

  • Page 12

    6. The setting of colour and sound system press the sys button, the screen will display colour and sound system. If the displaying colour is abnormal, press the or button to select color, then press the or button to select the right colour system. Every time you press or button, the colour system wi...

  • Page 14

    Press the or button to select adjustment mode 2. Sound adjustment complete the following steps and you will adjust the sound quality. Press the menu button to display the main menu. Press the or button to select sound , then press the or button to enter into the sub - menu of sound. Press the or but...

  • Page 15

    Note: during the process of picture and sound adjustment, every time you press the button, standard/ memory is displayed on the screen alternatively. When picture and tone quality are adjusted to your desired level, the mode is in memory mode. Sound memory press or button to select s.Woofer on to ma...

  • Page 16

    Press the or button to select off time. Pressing the or button set once/every off time. Every time you press the or button, it will change in the sequence of off every once off every ------. When the setting is once or every off time, press the or button to select time to turn off the set, then pres...

  • Page 17

    Press the or button to select on time. Pressing the or button set once/every on time. Every time you press the or button , it will change in the sequence of off every once off every......... When the setting is once or every on time, press the or but- ton to select time to turn on the set, then pres...

  • Page 18

    External equipment connections the following describes how to use and connect the tv with other equipment. Refer to the owner's manual of the other equipment to be connected as well. 1. To connect to av input you can video equipments such as a vtr and video camera to this tv and enjoy the high quali...

  • Page 19

    To select the input press the video button on the tv set or the av button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the av button until it displays programme number, or press direct channel select button or th...

  • Page 20

    18 . . . . . . . . . . . . X1~z37 x~z+2, s1~s41 a-6 - a-1, a - w, aa~ff x~z+2, s1~s41 630 (w) x 513.5 (h) x 501 (d) 140w dimensions (mm): weight (kg): pal-d/k pal-b/g pal-i ntsc-m us secam-b/g secam-d/k troubleshooting guide before calling service personnel, please check the following chart for a po...

  • Page 21

    Palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel:(02)9313 7111 fax:(02)9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia: 1300 657 888 604-25f53-00