Palsonic PAL180FZ User Manual - page 5
3
NOTE: Before performing any type of installation, disconnect the
fridge from the electrical source. When you are finished, connect the
fridge to the electrical source and reset the control to the desired setting.
LEVELING
If the fridge is not leveled during installation. The doors may
not close or seal properly, causing cooling, frost, or moisture
problems. It is very important of the fridge to be level in order
to function properly.
To level your fridge you may either turn the level leg
clockwise to raise that side to the fridge or turn counter –
clockwise to lower that side.
NOTE: Having someone push against the top of the fridge take some
weight off the leveling leg. This makes it easier to adjust the leveling
leg.
USE OF THE APPLIANCE
To obtain the best possible results form your refrigerator, it is
important that you operate it properly.
Before using, here is the brief instruction: red light: operation