DL manuals
Palsonic
Stereo System
PMSL-926
Instruction Manual

Palsonic PMSL-926 Instruction Manual - Worth

Manual is about: Mini Component Sound System

Page of 20

Download

Print this page

Bookmark us

Precautions

WORTH

knowing

Please keep the sound system's guarantee card and receipt safe for

warranty purposes, if guarantee card is supplied to you.

Read carefully through this manual to familiarise yourself with this

high - quality sound system.

Make sure the rating of your household electricity supply matches that

shown on the back of the sound system.

Refer to this chapter and the "Installation/connections" chapter (page

18/19) to help you install and adjust your sound system.

Do not ...

... expose the sound system to high levels of humidity and heat, to avoid

the risk of fire and electric shock.

... connect the sound system to the power supply if you have just moved

it from a cold to a warm environment. This can result in condensation

inside the system and cause serious damage to the machine and

cassettes. Wait around two hours to allow it to reach room

temperature.

Make sure ...

...

the system is placed on a stable, flat surface.

you place the system where there is good ventilation all around.

you clean the system only with a soft, line-free cloth, do not use

aggressive or alcohol-based cleaning agents.

you disconnect the power supply if the system appears to be working

incorrectly, is making an unusual sound, has a strange smell, has

smoke emitting from it or liquids have got inside it.

Have a qualified technician check the system.

you disconnect the power supply and aerial if you will not be using the

system for a long period or during a thunderstorm.

For your own safety!

There are no components in this sound system you can

service or repair yourself.

Do not open the case of the sound system. Only allow

qualified personnel to repair or service your set.

"Class 1 Laser Product" : Do not override the safety locks

around the laser unit of the CD player : Laser beams can

damage your eyes!

This sound system is designed for continuous operation.

Switching it off does not disconnect it from the mains

(stand-by). To disconnect it from the mains, you have to

unplug it.

Recording any copyright protected material may infringe

a copyright.

« ‹ Prev 1 2 3 4 5 6 7 Next › »

Summary of PMSL-926

Page 1
Instruction manual mini component sound system psml-926 palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel: (02) 9313 7111 fax: (02) 9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia:1300 657 888.
Page 2
2 table of contents contents / important safeguards ................................................................... Precautions and maintenance ........................................................................... Speaker connections / aux / phono connection ..................................
Page 3: Worth
Precautions worth knowing 3 please keep the sound system's guarantee card and receipt safe for warranty purposes, if guarantee card is supplied to you. Read carefully through this manual to familiarise yourself with this high - quality sound system. Make sure the rating of your household electricity...
Page 4: Installation/
Remote control and batteries placing your sound system components installation/ connections 4 optimal stereo position fit the batteries to match the + and - symbols in the compartment. Batteries for remote control unit are not provided. Please protect your environment! As batteries contain certain t...
Page 5
Installation installation/ connections 5 plug the provided am (mw)antenna here. Plug a device like a video recorder, tv set, or minidisc, etc. Here. Be sure to connect sockets and plugs of the same colour. Fit the speaker cables. Be sure to connect the pair of cables (for the left and the right spea...
Page 6: Controls
Open/ close the system controls 6 place your sound system horizontally on a flat, steady base so that air can circulate around it for ventilation. Away from humidify and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top. Standby/on to system power o...
Page 7
The system controls 7 press to play tape 2 in one direction " " both directions " " or repeatedly " " using mode button on the machine. To select timer setting and to activate / deactivate timer stand-by. Display / demo : to switch between the system's display and a display demonstration. You can se...
Page 8: Controls
The remote control unit controls 8 the remote control is the principal means of control, but the main functions are also available on the front of the machine. Press the buttons power or function (tape, tuner, aux, cd) to turn on the power. Power on / off (stand-by). Power save mode (only europe): t...
Page 9
With your sound sound system you have unique possibilities to modify the sound of your music the sound c o n t r o l s 9 on the machine volume level volume control both on the system as well as on the remote control. Music styles this adjustment section lets you adjust your system's sound to the mus...
Page 10: Radio
Tune tune tuning stations radio listening 10 programming station presets selecting station presets on the machine select the tuner function and the band by pressing band / tuner button. The other buttons are on the machine too. If you try to store a 31st fm / 16th am (mw) station, the display will s...
Page 11
Continuous playback winding playing tapes 11 tape 1: to playback prerecorded tapes. Tape 2: only to playback prerecorded tapes and to record tapes. For tape recording see page 14-15. Button on the machine select the tape 1 or tape 2 function. Open either tape compartment to load the tape. Be sure to...
Page 12: Playing
Function preset clear searching skipping playing cds cd playing 12 to search for a particular point on the disc reverse or forwards. To skip tracks down / up (if you want, press the button repeatedly). On the machine select the cd function, by pressing the cd button. The other buttons are on the mac...
Page 13
Preset clear random " all random " " repeat " " repeat " " repeat " random playback repeat playback programmed cd tracks playback 13 please read remarks about discs on page 19 select the repeat function, press repeatedly to have ... To repeat the current track to repeat the current disc, to repeat a...
Page 14: Recording
Buttons on the machine recording stations recording 14 load a tape with enough free recording time into tape 2. Be sure to have the open part of the cassette downwards and the left hand spool fully wound. Close the compartment door again, pushing it softly select the tuner function. Buttons on the m...
Page 15
Recording from another tape (dubbing) recording cds with synchro start recording 15 tape 1: only to playback prerecorded tapes tape 2: to playback prerecorded tapes in both directions and to record if the tape is not rewound completely, rewind it first. If you want to start at the current position, ...
Page 16: Controls
Displaying the time setting the clock (24 hour) controls 16 setting the sleep timer function power save mode is activated by power button after clock setting. Clock sleep sleep switch off your sound system*. Enter clock-set mode, the hour and minute digits flash. Set the current hour. Switch to the ...
Page 17
T i m e r and clock 17 timer checking the timer timer (record) stand-by on / off setting the timer you can set the machine to automatically switch on and off at a specified time. Be sure the clock is set accurately. Select the timer function. (timer display disappears after about 9 seconds.) select,...
Page 18: Appendix
Before you ask a specialist appendix 18 no sound no display noise with radio sound bad sound with tapes not recording not playing cds remote control does not work - no mains supply? - volume at minimum? - are headphones plugged in the headphone socket? - did someone press the mute button? - the powe...
Page 19
100 watt 87.5mhz - 108mhz 522 - 1620khz compact discs a p p e n d i x 19 always ... Never ... Handle your discs with care. Hold a disc with the fingers touching the edge or the hole. Place the disc with the label facing up. Place the disc properly into the tray using the proper guide area for 12 cm ...
Page 20
Palsonic corporation pty ltd 1 joynton avenue waterloo nsw 2017 australia tel: (02) 9313 7111 fax: (02) 9313 7555 www.Palsonic.Com.Au palsonic customer service telephone australia: 1300 657 888.