Palstar AT5K Owner's manual - page 6
6
Specifications
1-800-773- 7931 W W W .PALST AR.CO M
Front Panel Indicators and Controls
Metering
Dual movement cross needle power and frequency
compensated coupler
Controls
Input Tuning
Variable capacitor (600 pF, 6kV Peak)
Antenna Tuning
Variable capacitor (600 pF, 6kV Peak)
Inductance
35 µH roller inductor 10 ga. plated copper wire
rated at 10 amps and 5kV
Antenna Selector Switch
6 position: Coax 1 tuned and tuner
Bypass, Coax 2 tuned and tuner
Bypass; Bypass and balanced antenna
Switch wafers are ceramic (7kV/10A rated)
Power Range Switch
2 position 300 W /3000 W
Rear Panel Connectors
Coax 1
SO239 connector (silver/gold/TFE)
Coax 2
SO239 connector (silver/gold/TFE)
Bypass
SO239 connector (silver/gold/TFE)
RF INPUT
SO239 connector (silver/gold/TFE)
Balanced Line
Dual High Voltage Nylon66
TM
terminal post
12 VDC Input
Adaptor for meter light 2.1 mm con. (center positive)
Other
Frequency Coverage
1.8 — 29.5 MHz
Power Maximum
5000 W PEP SSB, 3500 W single tone continuous
Impedance Range
10 to 2000Ω NOTE: Power Range p.14
Balanced Output
1:1 current type Balun at input-Ferrite
Dimensions
8”H x 16”W x 18”D (incl. terminals)
Weight
25 lbs.
Materials
Chassis, brackets, and top cover are gold chem-film
coated aluminum (.090) & powder coated.
Front Panel
Front panel is matte powder coated and screened.