Panacom HP-9686 User Manual - Product Functions

Pg. 4

PRODUCT FUNCTIONS

Wireless Headphone

1. Insert the emitter audio cable into the “Audio OUT” socket of the audio 

source (see Fig.1) or earphone socket, and turn ON the function switch of 

the emitter.

2. Turn on the volume control and power button ON/OFF on receiver, the 

indicator will light up. First press the RESET key, and then press the SCAN 

key, the sound sent from the emitter will be heard.

Note: If the sound is distorted or too strong, adjust the volume of the sound source 

to a lower level, and the reception performance may improve.

Wired PC Headset

Connect the black end of the microphone cable into the audio socket on 

the receiver, and insert the other two ends into the microphone and audio 

sockets of the PC. (see Fig.2)

Wired Earphone

Insert one end of the audio cable into the audio socket of the receiver (see 

Fig.3) and insert the other end into the earphone socket of the audio device, 

such as MP3 player, VCD player, DVD player, etc. and then the unit can be 

used as a wired earphone.

Turning off the unit

1. When the unit is not used, move the power switch on the emitter to OFF 

position to turn it off . 

2. Turn the volume control on the receiver to OFF position, it will “click” and 

the power indicator of the receiver will light off.

Note: Remove batteries when not using unit for a long time.