Panamax MAX 5410 Pro Owner's Manual - Feature Overview
4
FEATURE OVERVIEW
Front Panel Pushbutton:
1 of 2 Triggers that can activate a
turn-on or shutdown sequence for
Outlet Banks 1 and 2 and High-
Current outlets.
See the Featured Details sec -
tion for more information.
LED Indicators:
Status indicator lights for:
• DC Voltage Trigger
• Switched Outlets
• Ground OK
• Line Fault
• Unsafe Voltage
LED:
Indicates ON/OFF
status. Flashing
indicates Turn
ON/OFF sequence
in progress.
Meter Light Dimmer:
Controls brightness
of the Voltmeter
backlighting.
High-Current Outlet Bank:
Two delayed outlets designed
for high-current components
such as amplifiers and pow-
ered subwoofers. The current
available to connected equip-
ment is not limited by the
noise filtration components.
Voltage Sense
Trigger Input:
3.5mm Mini-Plug jack.
Connect to a remote trigger
device that provides 12VDC
to trigger a startup/shutdown
sequence. This is the sec -
ond trigger that will activate
the MAX
®
5410 turn-on or
shutdown sequence. (See
pushbutton on front panel).
Voltage Sense
Trigger Output:
3.5mm Mini-Plug jack.
Supplies a 12VDC
trigger to control
the startup/shutdown
of an additional device.
High-Current
Outlets Turn-On
Switch:
2-position slide
switch. Allows
adjustment of the
Turn-On delay for
the two High-Current
Outlets. Choose
between 0 and 10
seconds.
Outlet Banks
1 and 2 Turn-Off
Switch:
2-position slide
switch. Allows
adjustment of the
Turn-Off delay for
Outlet Bank 1.
Choose between
0 and 10 seconds.
Satellite
Coax Jacks:
Two pairs of gold
plated F-Connectors
optimized for
Satellite TV signal
line protection.
RS232
Connection:
For home
automation
systems.
USB Style
Port for
LED
Light
Cable TV
Coax Jacks:
Two pairs of gold
plated F-Connectors
optimized for Cable
TV and non-amplified
Rooftop Antenna
signal line protection.
Telephone Jacks:
In/Out connections
for telephone line or
pay-per-view line
protection. Integrated
lone splitter allows
two devices to be
connected to one
phone line.
Input
Trigger
Enable
Switch
Output
Trigger
Delay
Switch
Voltmeter:
Backlit analog meter
measures incoming
voltage source from
0-150 VAC.
Convenience Outlet:
Provides a quick convenient
way to plug in components
such as camcorders and
video game systems.
IEC Main Power
Receptacle:
Power cord connects
to this receptacle.
15A Circuit Breaker:
Opens in the event that
equipment plugged into
the MAX
®
5410 draws
too much current. When
the white button of the
breaker is visible, the
breaker has opened.
Reduce the load and
push to reset.
Ground Lug: Provides
a common grounding
point for equipment with
separate ground leads.
Filtered Outlet
Banks 3 and 4:
Four Always-On outlets for
audio/video components that
require constant power to
maintain programmed settings.
Filtered Outlet
Banks 1 and 2:
Four switched outlets for
audio/video components
that do not require con-
stant power.
1690 Corporate Circle, Petaluma, CA 94954 • www.panamax.com
1
2
3
4