Base station operating instructions f0909t0 -f @ printed in japan vqt2h41 model no. Ag-bs300p model no. Ag-bs300e before operating this product, please read the instructions carefully and save this manual for future use. English ag-bs300p_e(vqt2h41)_e.Book 1 ページ ２００９年１０月２３日 金曜日 午後６時８分.
2 read this first ! For ag-bs300p indicates safety information. Warning: y to reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. Y to reduce the risk of fire or electric shock, keep this equipment away from all liquids. Use and store only in locations which ...
3 read this first ! (continued) for ag-bs300p important safety instructions 1) read these instructions. 2) keep these instructions. 3) heed all warnings. 4) follow all instructions. 5) do not use this apparatus near water. 6) clean only with dry cloth. 7) do not block any ventilation openings. Insta...
4 read this first ! (continued) for ag-bs300e caution for ac mains lead for your safety please read the following text carefully. This product is equipped with 2 types of ac mains cable. One is for continental europe, etc. And the other one is only for u.K. Appropriate mains cable must be used in ea...
5 read this first ! (continued) for ag-bs300e indicates safety information. Warning: this equipment must be earthed. To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through normal household wiring. Extension cords ...
6 read this first ! (continued) emc notice for the purchaser/user of the apparatus 1. Applicable standards and operating environment (ag-bs300e) the apparatus is compliant with: z standards en55103-1 and en55103-2 1996.11, and z electromagnetic environments e1, e2, e3, and e4. 2. Pre-requisite condi...
7 table of contents read this first ! ........................................................2 supplied accessories.............................................7 features ...................................................................7 system configuration diagram .............................8...
8 system configuration diagram z be sure to connect cables 1 - 6 shown above. Z other compatible camera: aj-hpx3700g, aj-hpx3000g, aj-hpx2700g, aj-hpx2000/2100, ag-hpx500/502, aj-hdx900p/e remote genlock in remote vf out sdi in genlock out sdi out2 ca out bs in ca in bs out dc in 24 v dc out 24 v re...
9 precautions when connecting the system take caution with the following when connecting the camera adapter and this unit. Z to connect the camera adapter and the unit, use a power supply cable of the specification described in [about the power supply cable] (page 18). When connecting and disconnect...
10 camera extension system and camera recorder configuration example connection with the ag-hpx300/301/302/304 * video signal will be converted to component signal. Z use bt-lh80w/wu as a monitor. Z when the video format of the ag-hpx300/301/302/304 is hd format, the ret signal selection switch on t...
11 camera extension system and camera recorder configuration example (continued) connection with camera recorders other than ag-hpx300/301/302/304 or ag-hpx500/502 *1 video signal will be converted to component signal. *2 use the bt-cs80g. Z use bt-lh80w/wu as a monitor. Z when the video format of t...
12 camera extension system and camera recorder configuration example (continued) connection with the ag-hpx500/502 * video signal will be converted to component signal. Z use the viewfinder included with the ag-hpx500/502 (dedicated for sd). Also, it is required to use the ag- ya500g (optional). Z u...
13 part names and functions front panel 1. Power switch this is the main power switch when using an ac power supply. It does not work when using a dc power supply. 2. Power lamp this indicates that the main power supply (ac power supply) is turned on. 3. Operate lamp this indicates that this unit is...
14 part names and functions (continued) rear panel 1. Dc out 24 v connector dc 24 v is output while this unit is operating with the ac power supply. This will supply dc power supply to the camera adapter. 24 v is not output when this unit is operating with the dc power supply. 2. Ca in connector con...
15 part names and functions (continued) 14. Ret signal selection switch this is a switch to select the return signal from this unit to the camera adapter. Select the ret signal supplied to either the 7.Ret in video signal connector or the 8.Ret in sdi signal connector. Sdi: selects the sdi signal su...
16 about the signals to input to genlock in connector supply the following signals to the genlock in connector, as a genlock input signal to this unit, in accordance with the video format used. Video may be disrupted if any other signals are supplied. When using the unit in hd mode, input the hd 3-v...
17 about the rack mount this unit can be installed onto an eia standard rack. 1 using the 6 included rack mount adapter screws, mount the included rack mount adapters. 2 loosen the screws, and remove the 4 pedestals. 3 mount onto the rack using screws (commercially available). Tighten the screws sec...
18 about the power supply cable use the power supply cable with the following specifications with the unit. The extension length of 100 m cannot be maintained between this unit and the camera adapter especially if the resistance value is larger than the following specifications. 1) conductor resista...
19 menu display setting menu can be displayed in the video output from the video out (menu) connector in the rear panel of this unit. Basic structure of the menu menu setting is operated with the menu switch and the sel switch. Menu is divided into main menu, and submenu and setting items. Set data ...
20 list of menus sd mode 180/720 mode the ____ in the variable range column indicates the preset mode. Item / data saved variable range note format 1080-59.94i 1080-23.98psf 1080-24psf 1080-50i 720-59.94p 720-50p 720-60p 480-59.94i 576-50i displays the format used in this unit. Status display only. ...
21 list of menus (continued) only displayed when in hd mode the ____ in the variable range column indicates the preset mode. Item / data saved variable range note downcon mode squeeze side-crop letter box set the mode for the composite signal output from the video out (menu) connector. Squeeze: vide...
22 connector signals connect pin 3 of the incom cable connector to frame gnd. Incom 1 incom mic gnd 2 incom mic 3 incom receive gnd 4 incom receive 5 incom receive remote 1 cam data (h) 2 cam data (c) 3 cam cont (h) 4 cam cont (c) 5 ecu on 6 video 7 video gnd 8 - 9 +13 v 10 gnd dc in 12 v 1 gnd 2 - ...
23 specifications [general] operation ambient temperature: 0 ° c to 40 ° c (32 °f to 104 °f) storage temperature: -20 ° c to 60 ° c (-4 °f to 140 °f) operation ambient humidity: 10 % to 85 % (relative humidity) weight: approx. 4.8 kg (approx. 10.6 lb) external dimensions (width ° height ° depth): 43...
Panasonic broadcast & television systems company unit company of panasonic corporation of north america executive office: one panasonic way 4e-7, secaucus, nj 07094 tel: 201-348-7000 eastern zone: one panasonic way 4e-7, secaucus, nj 07094 tel: 201-348-7196 southeast region: tel: 201-392-6151 wester...
