Panasonic AJ-HPX3000 Procedure - page 2
AJ-HPX3000 update procedure Oct.2008
Page2/5
Panasonic Corporation
2. Update with the SD Card
2-1. Summary
1.Copy the update file of the Driver Software (Firmware) to an SD card.
2.Software can be updated using this SD card. (It is not suppurted MMC Card)
CAUTION: Before Update Software
●
Do not power down or pull card while upgrading.
If the program quits during loading, the data will be erased or
part writing condition and the restart is not made.
2-2. Preparation
1. SD Card (more than 64MB memory card) is required.
2. Insert an SD card into the P2 equipment and format SD card.
NOTE: SD Card needs to be formatted by P2 equipment. SD card formatted by PC standard formatter will not
work.
Copy the update file of Driver Software to the SD card as follows.
1. Download the Driver Software file “VSI*****.zip” from the support desk.
https://eww.pavc.panasonic.co.jp/pro-av/
2. Copy the file “VSI*****.zip” to the hard disk of your PC and extract the file.
3. Insert a formatted SD card into the card slot of PC.
4. Copy the whole folder “PRIVATE” in the extracted folder to the SD card.
NOTE: Do not change the construction of folder and the file name.
NOTE: External Power
It is best to power the unit from the external power supply. This will prevent the unit from shutting off during updating.