Panasonic broadcast aj-hdc27hp menu information.
86 menu operations the setting menu operations are performed using the menu button and jog dial button. The menu configuration is divided into the camera unit’s setting menus and vtr unit’s setting menus. It is possible to select the engineer menu which enables all the setting menu items to be set o...
87 menu operations (continued) user menu: engineer menu basic setting menu operations displaying menus film (cam) user menu press the menu button. Press the menu button. Press the jog dial button. 1 press the menu button. The camera unit’s user menu screen is displayed. 2 when the menu button is pre...
88 n master ped : +000 master dtl : +00 master gamma : 0.45 r gain : +000 g gain : +000 b gain : +000 r pedestal : +000 g pedestal : +000 b pedestal : +000 menu operations (continued) operations common to the user menu and engineer menu example: displaying sub-menus and deciding on settings turn the...
89 setting menu configuration film (cam) main menu 1 rop matrix color correction 1 color correction 2 low setting mid setting high setting } additional dtl1 additional dtl2 master ped master dtl master gamma r gain g gain b gain r pedestal g pedestal b pedestal } matrix table matrix r-g matrix r-b m...
90 setting menu configuration (continued) film (cam) main menu 2 vf diaplsy vf marker vf indicator camera id shutter speed ! Led camera sw mode super gain disp condition disp mode vf out vf dtl zebra1 detect zebra2 detect zebra2 low light lvl synchro scan disp. Ecu menu disp. Safety zone center mark...
91 setting menu configuration (continued) film (cam) main menu 4 film (cam) user menu select1 film (cam) user menu select2 black shading flare initialize diagnostic option rop low setting mid setting high setting additional dtl1 additional dtl2 skin tone dtl knee/level gamma camera setting vf displa...
92 setting menu configuration (continued) vtr main menu function battery/tape vtr vf indicator mic/audio time/date news rec mode humid ope rec start pause timer retake mode interval rec mode interval rec time interval pause time ecu rec chk sw character on sdi battery select ext dc in select batt ne...
93 setting menu screens film (cam) menus the main menu consists of film (cam) main menu (1 to 4) of the camera and the vtr main menu of the vtr. These screens are index screens which are used to open the sub-menus. The setting menu is operated with the menu button and jog dial button. (refer to page...
94 setting menu screens film (cam) main menu 1 rop screen the rop (remote operation panel) is set on this screen. Item variable range remarks master ped (film menu) (cam menu) –200 : +000 : +018 : +200 (max.) vf display user eng master pedestal level setting. Master dtl –31 : +00 : +31 user eng h. D...
95 setting menu screens film (cam) main menu 1 (continued) color correction 1 screen the camera color saturation adjustments and hue adjustments are set on this screen. Item variable range remarks r (sat) r (phase) –63 : +00 : +63 vf display eng color saturation adjustment and hue adjustment: red mg...
96 setting menu screens film (cam) main menu 1 (continued) low setting screen the low level gain is set on this screen. Item variable range remarks ∫ master gain (film menu) –3db : 0db : 30db vf display user eng –3 db, 0 db, 3 db, 6 db, 9 db, 12 db, 18 db, 24 db or 30 db can be set. H. Dtl level (fi...
97 high setting screen the high level gain is set on this screen. Item variable range remarks ∫ master gain (film menu) –3db : 6db : 30db vf display user eng –3 db, 0 db, 3 db, 6 db, 9 db, 12 db, 18 db, 24 db or 30 db can be set. (cam menu) –6db : 12db : 30db –6db, –3 db, 0 db, 3 db, 6 db, 9 db, 12 ...
98 setting menu screens film (cam) main menu 1 (continued) skin tone dtl screen the skin tone detail of the camera is set on this screen. Item variable range remarks ∫ skin tone dtl on off vf display user eng for setting the skin tone detail to on or off. ∫ skin tone zebra on off user eng for settin...
99 setting menu screens film (cam) main menu 1 (continued) the underlining in the variable range column indicates the setting in the preset mode. Gamma screen the gamma settings of the camera are performed on this screen. Item variable range remarks r gamma (cam menu) –15 : +00 : +15 vf display user...
100 spot off on 109% 0% zebra 2 detect zebra 2 zebra 1 detect vf display screen the information to be displayed inside the viewfinder is set on this screen. Item variable range remarks disp condition normal hold vf display user eng normal: the statuses are displayed at all times. Hold: the statuses ...
101 vf indicator screen the information to be displayed inside the viewfinder is set on this screen. Item variable range remarks extender on off vf display user eng for setting the extender display to on or off. Shutter on off user eng for setting the shutter speed display to on or off. Filter on of...
102 the underlining in the variable range column indicates the setting in the preset mode. Setting menu screens film (cam) main menu 2 (continued) 1. Turn the jog dial button to move the arrow (cursor) to the id 1:, id 2: or id 3: item. 2. When the jog dial button is pressed, the arrow (cursor) move...
103 shutter select screen a shutter speed is set in each position item on this screen. Item variable range remarks synchro scan 2 90.0 deg : 180.0 deg : 225.0 deg vf display eng for selecting the shutter speed which is to be set in synchro scan 2. Position 1 sel (film menu) (cam menu) 180.0 deg 172....
104 camera sw mode screen the modes of the camera switches are set on this screen. Item variable range remarks filter inh on off vf display user eng for selecting whether or not the data in the awb memories (channel a, channel b) is to be held for each filter. On: only the channel a and channel b me...
105 item variable range remarks vf display camera sw mode screen user2 sw (cam menu) (film menu) inh s.Gain s.Iris s.Blk b.Str audio ch1 audio ch2 rec sw y get ret sw f.Rate user eng for allocating the functions in user2 button. Owhen b.Str has been selected as this item’s setting, the function for ...
106 the underlining in the variable range column indicates the setting in the preset mode. Setting menu screens film (cam) main menu 2 (continued) super gain screen the gain allocated to the super gain switch is set on this screen. Item variable range remarks s. Gain value 18db 24db 30db 36db vf dis...
107 cam card r/w select screen item variable range remarks vf display cam card r/w select screen the settings for saving (recording) specific menu data on the sd memory card and loading (reading) the data from the card are performed on this screen. Item variable range remarks id read/write on off vf...
Write == user eng for writing lens files to the sd memory card. 108 the underlining in the variable range column indicates the setting in the preset mode. Setting menu screens film (cam) main menu 3 (continued) genlock/iris screen the genlock and iris control settings are performed on this screen. I...
109 setting menu screens film (cam) main menu 3 (continued) the underlining in the variable range column indicates the setting in the preset mode. Lens adj screen the lens adjustments are performed on this screen. Item variable range remarks f2.8 adj on off vf display eng for outputting the voltage ...
110 setting menu screens film (cam) main menu 4 film (cam) user menu select 1, 2 and 3 screens the settings for registering the items (the same as the ones on the film or cam main menu 1, 2 and 3 screens) allocated to the sub menus to the sub menu screen are performed on this screen. Registration on...
111 black shading screen the black shading adjustments are performed on this screen. Item variable range remarks detection == vf display eng for execution of the digital shading compensation. Correct (dig) on off eng for setting the digital shading compensation to on or off. The underlining in the v...
112 the underlining in the variable range column indicates the setting in the preset mode. Setting menu screens film (cam) main menu 4 (continued) diagnostic screen the usage statuses and software versions are displayed on this screen. Item variable range remarks camsoft (in) == vf display eng for d...
113 setting menu screens film (cam) main menu 4 (continued) evaluation screen the underlining in the variable range column indicates the setting in the preset mode. Os/n measurement screen the s/n measurements are performed on this screen. Item variable range remarks s/n on vf display eng for settin...
114 setting menu screens film (cam) main menu 4 (continued) oresolution measurement screen the resolution measurements are performed on this screen. Item variable range remarks resolution on vf display eng for setting the resolution measurement. Detail on off eng for setting the detail to on or off....
115 vtr main menu screen sub menu vf display remarks function eng index for opening the function screen. Battery/ tape eng index for opening the battery/tape screen. Battery setting eng index for opening the battery setting screen. Vtr vf indicator eng index for opening the vtr vf indicator screen. ...
116 setting menu screens vtr main menu function screen the vtr’s functions are set on this screen. Item variable range remarks news rec mode off 0.2 : 2.0 vf display user eng for selecting the vtr start button acknowledgment time during recording. Off: the pressing of the vtr start button is acknowl...
117 battery/tape screen item variable range remarks batt near end alarm on off vf display user eng for setting the warning tone heard when the battery is near the end of its charge to on or off. Batt near end cancel on off user eng for switching the function which cancels the warning tone heard when...
118 setting menu screens vtr main menu (continued) 1. Either “ ¢” or “≥” appears in front of each item to indicate whether the item is set to on or off. ¢ : on ≥ : off 2. Each time the jog dial button is pressed, the setting moves in the following sequence: 7 auto : the near end voltage value preset...
119 setting menu screens vtr main menu (continued) the underlining in the variable range column indicates the setting in the preset mode. Item variable range remarks vf display save led save&tape save user eng for setting the operation of the save lamp. Save: this lights when the vtr save/stby switc...
120 setting menu screens vtr main menu (continued) item variable range remarks vf display mic lowcut ch2 front rear f&r off user eng for setting the high-pass filter for the ch2 mic input. Front: the high-pass filter for the front mic input is set to on. Rear: the high-pass filter for the rear mic i...
121 setting menu screens vtr main menu (continued) when user is set for the ub mode item, it is not possible to set ext for the vitc ub mode item. Similarly, it is not possible to set ext for the ub mode item when user has been set for the vitc ub mode item. Tc/ub screen the time code and user bits ...
122 setting menu screens vtr main menu (continued) the time code and user bits settings are performed on this screen. The underlining in the variable range column indicates the setting in the preset mode. Tc/ub screen item variable range remarks vf display vitc ub mode user date time ext tcg user en...
Front == eng for displaying the version of the lcd panel drive microcomputer. 123 time date screen the time/date settings are performed on this screen. Item variable range remarks year 00—05—99 vf display eng for setting the year. Month 1 — 12 eng for setting the month. Day 1 — 31 eng for setting th...
Ext dc in select ¢ ≥ eng for setting the registration of the ext dc in select item on the user menu screen. 124 setting menu screens vtr user menu select on ( ¢) or off (≥) is set on this screen to determine which items are to be registered on the user menu screen. The maximum number of vtr unit ite...
125 setting menu screens vtr user menu select (continued) on ( ¢) or off (≥) is set on this screen to determine which items are to be registered on the user menu screen. The maximum number of vtr unit items which can be registered is 14. The underlining in the variable range column indicates the set...
