- DL manuals
- Panasonic
- Recording Equipment
- AJSPD850P - P2 DECK
- Menu Information
Panasonic AJSPD850P - P2 DECK Menu Information
Summary of AJSPD850P - P2 DECK
Page 1
Panasonic broadcast aj-spd850p menu information.
Page 2: Setup (Initial Settings)
40 setup (initial settings) the memory card recorder’s main settings are performed while making selections using a system of menus. If a tv monitor has been connected to the video out 3 connector or sdi out 3 connector (optional) on the rear panel and the super switch is set to [on], the setting men...
Page 3: Setup Menus
41 setup menus the memory card recorder can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use. Changing the file (1) press the menu button (2) press the ff button while holding down the diag (or shift) button to switch to the next ...
Page 4: Setup Menus (Continued)
42 setup menus (continued) loading user files the contents of the user2, user3, user4 or user5 file can be copied (loaded) into the user1 file. Also, the contents of the user1 file can be copied (saved) into the user2, user3, user4 or user5 file. (1) press the menu button (2) press the rew or ff but...
Page 5: Setup Menus (Continued)
43 setup menus (continued) system menu no./item description 11 sys sc coar. Coarse adjustment of system phase: 90 ° units note: if setting operation is performed, the setting value does not return to factory (default) setting. 0000 0 0001 90 0002 180 0003 270 12 sys sc fine fine adjustment of system...
Page 6: Setup Menus (Continued)
44 user menu no./item description 000 p-roll time this sets the preroll time. The preroll time can be set from 0 to 15 seconds in 1-second increments. 0000 0s : : 0005 5s : : 0015 15s 001 local ena this selects the buttons which can be operated on the front panel when the remote button is lit. 0000 ...
Page 7: Setup Menus (Continued)
45 setup menus (continued) user menu the underlined items indicates the initial setting. No./item description 008 display sel this selects what information is to be provided by the time code and other superimposed displays output from the video out 3/sdi out 3 connector (optional). 0000 time : data ...
Page 8: Setup Menus (Continued)
46 setup menus (continued) user menu the underlined items indicates the initial setting. No./item description no./item description 012 sys format this sets the memory card recorder’s recording and playback format. 0000 50m : dvcpro50 (50 mbps) is selected. 0001 25m : dvcpro (25 mbps) is selected. 00...
Page 9: Setup Menus (Continued)
47 setup menus (continued) user menu no./item description 05 time zone sets the time difference from the world standard time. Refer to the table below, and select the setting which corresponds to the local time. 0000 00:00 0001 +00:30 0002 +01:00 : : 0050 –00:30 no./item description 070 tv system th...
Page 10: Setup Menus (Continued)
48 setup menus (continued) the underlined items indicates the initial setting. No./item description 100 search ena this selects the direct search dial operation. 0000 dial : for direct search dial operations. 0001 key : operation is not transferred to the search mode unless the search button is pres...
Page 11: Setup Menus (Continued)
49 setup menus (continued) no./item description user menu 113 a in sel inh this selects whether audio input switching using the input select button is to be enabled or disabled. 0000 off : audio input switching using the input select button is enabled. 0001 on : audio input switching using the input...
Page 12: Setup Menus (Continued)
50 setup menus (continued) the underlined items indicates the initial setting. No./item description user menu 201 9p sel this selects whether the remote (9p) connector functions when the remote button is lit. 0000 off : connector does not function. 0001 on : connector functions. 204 rs232c sel this ...
Page 13: Setup Menus (Continued)
51 setup menus (continued) no./item description user menu 303 std/non-std this selects std or non-std in accordance with the composite input signal. 0000 auto : standard/non-standard signals are automatically identified and processed. 0001 std : standard signals are processed. (forced std) 0002 n-st...
Page 14: Setup Menus (Continued)
52 setup menus (continued) no./item description user menu 500 vitc blank this selects whether to output the vitc signal at the positions selected by setup menu items no. 501 (vitc pos-1) and no. 502 (vitc pos-2). 0000 blank : vitc signals are not output. 0001 thru : vitc signals are output. 501 vitc...
Page 15: Setup Menus (Continued)
53 setup menus (continued) no./item description user menu user menu 510 tc out ref this is used to switch the phase of the time code, which is output from the time code out connector, for the external ltc input when the tcg switch is at the “ext” position. 0000 v out : time code is synchronized with...
Page 16: Setup Menus (Continued)
54 no./item description 620 esr mode this selects the operation mode for edge subcarrier reduction (esr) in the playback circuit. 0000 off : the mode is forcibly set to off. 0001 auto : the mode is automatically set to on or off depending on the memory card recorder operation. 621 ccr mode this sele...
Page 17: Setup Menus (Continued)
55 setup menus (continued) the underlined items indicates the initial setting. User menu no./item description 622 setup 25 (for aj-spd850p) sub-screen for setting 7.5% setup processing to be performed on input and output signals in the dvcpro (25 mbps) mode. When the stop button is pressed, operatio...
Page 18: Setup Menus (Continued)
56 setup menus (continued) user menu no./item description 660 umid rec this selects whether or not to record the umid information on the card. 0000 off : umid information is not recorded on the card. In addition, ee output signals are blanked. 0001 on : umid information is recorded on the card. Note...
Page 19: Setup Menus (Continued)
57 no./item description 727 pb fade this selects the processing method for the audio edit points (in point, out point) during playback etc. 0000 auto : the processing method accords with the status established during recording. 0001 cut : forced cut 0002 fade : forced fade 728 embedded aud this sele...
Page 20: Setup Menus (Continued)
58 setup menus (continued) no./item description user menu 800 add line 25 sub-screen 00 rec line1 this selects the additional line where the signals are to be recorded. [625i system] 0000 7l : : 0002 9l : : 0015 22l 0016 320l : : 0031 335l 0032 623l [525i system] 0000 10l : : 0002 12l : : 0012 22l 0...
Page 21: Setup Menus (Continued)
59 no./item description setup menus (continued) no./item description user menu 02 rec line3 03 rec line4 this selects the additional line where the signals are to be recorded. Note: this menu option is not displayed when setting “1” has been selected as the additional line mode. [625i system] 0000 7...
Page 22: Setup Menus (Continued)
60 user menu the underlined items indicates the initial setting. No./item description 803 teletext det [525i system] 00 rec line1 : 12 rec line13 [625i system] 00 rec line1 : 14 rec line15 this selects the lines in which the teletext signals are to be recorded. [625i system] 0000 off 0001 7&320 0002...
Page 23: Setup Menus (Continued)
61 setup menus (continued) number of lines which can be set for teletext • when 25 mbps is the recording/playback format. No. 800: add line 25 setting value number of lines which can be set [525i system] [625i system] 660: umid rec setting value 660: umid rec setting value off on off on off yc422 yc...
Page 24: Setup Menus (Continued)
62 setup menus (continued) no./item description user menu a00 load this selects the user file whose contents will be loaded into user1. 0000 user2 : the user2 file contents are loaded. 0001 user3 : the user3 file contents are loaded. 0002 user4 : the user4 file contents are loaded. 0003 user5 : the ...