1. DL manuals
  2. Panasonic
  3. Controller
  4. AWPS505 - AC ADAPTOR
  5. Operating Instructions Manual

Panasonic AWPS505 - AC ADAPTOR Operating Instructions Manual - Features

Manual is about: Multi-Function Controller

Summary of AWPS505 - AC ADAPTOR

  • Page 1

    Ac adapter aw-ps505 before attempting to connect or operate this product, please read these instructions completely..

  • Page 2

    Warning: this equipment generates and uses radio frequency ener- gy and if not installed and used properly, i.E., in strict accordance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a class a computing d...

  • Page 3: Features

    Contents features ................................................................................................................................................................................... 1 precautions ...........................................................................................

  • Page 4: Precautions

    -2- • handle the control panel with care. Dropping the control panel or subjecting it to a strong shock can cause a failure or an accident. • operating temperature range –10°c to +45°c avoid using it in a cold place below –10°c or a hot place above +45°c because low or high temperature will adversel...

  • Page 5

    -3- major operating controls and their functions ■ front panel on power off power o i fuse(power) 125v 3.15a fuse fuse ac adaptor aw- ps505 q power switch [power on/off] power is switched on to supply power to the multiport hub when this switch is pressed to the on position (power indicator lights),...

  • Page 6

    -4- r ac 120v input connector [ac in] (ac 3p inlet) connect the supplied ac cable to it. T dc +12v output connector [dc 12v out] (4p cannon connector) connect it to the dc 12v in connector on the multiport hub with the supplied dc cable. ■ rear panel ac in dc 12v out.

  • Page 7: Connection

    -5- connection • switch off all the devices before making any connection. • connect dc 12v out connector t of this adapter to the dc +12v input connector on the multiport hub aw-hb505 with the supplied dc cable. • connect the supplied ac cable to the ac 120v inlet. Plug the ac cable to an ac outlet,...

  • Page 8: Specifications

    -6- specifications power: 120 v ac 60 hz 0.44a ipower output: dc12v 2.5a, with over-current protect circuit operating temperature: –10°c to +45°c (14°f to 113°f) dimensions: 210(w) x 51(h) x 250(d) mm 8-1/4”(w) x 2”(h) x 9-7/8”(d) weight: 2.5 kg (5.5 lbs.) finish: av ivory baking weight and dimensio...

  • Page 9

    N1197-0 7j1a111a printed in japan broadcast & television systems company division of matsushita electric corporation of america executive office: one panasonic way 2e-6, secaucus, nj 07094 regional offices: eastern zone: 43 hartz way, secaucus, nj 07094 (201) 348-7620 central zone: 1707 north randal...