Panasonic BB-HCA7A Installation Manual - Installation Guide

2

Indoor Use Only

Installation Guide

AC Adaptor

Model No. 

BB-HCA7A

Please read this manual before using, and save this 

manual for future reference.

Panasonic Network Camera Website:

http://www.panasonic.com/netcam

Supported Product (Customer-Provided)

This product is the dedicated AC adaptor for some of 

our cameras. For the latest information, visit the 

Panasonic Network Camera support website at 

http://panasonic.net/pcc/ipcam/

Compatible Cameras (as of June 2009)

Model No.: BB-HCM715A/BB-HCM735A

Additional network camera models may become 

available for use with this product.

IMPORTANT SAFETY INSTRUCTIONS

When using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, 

or personal injury.

1.

Read and understand all instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not expose this product to rain or any type of moisture.

6.

Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including 

amplifiers) that produce heat.

7.

Protect the AC adaptor cord, the AC cord and the extension cord from being walked on or pinched particularly 

at plugs, convenience receptacles, and the point where they exit from this product.

8.

Do not touch the AC adaptor, the AC adaptor cord, the AC cord and the extension cord during lightning storms.

9.

Unplug this product from power outlet when unused for long periods of time.

10. Refer all servicing to qualified service personnel. Servicing is required when this product has been damaged in 

any way, such as the AC adaptor, the AC cord or the plug is damaged, or this product does not operate normally.

11. The AC adaptor, the AC adaptor cord, the AC cord and the extension cord are not splash resistant, and are 

intended for indoor use only. The AC adaptor, the AC adaptor cord, the AC cord and the extension cord must be 

waterproofed for outside use.

12. Unplug this product from power outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions 

can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.

13. The AC cord is used as the main disconnect device, ensure that the socket-outlet shall be installed near the 

equipment and shall be easily accessible.

SAVE THESE INSTRUCTIONS

FCC and Other Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user 

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

How to Use This Manual

This manual describes safety instructions, included 

items, specifications, and how to connect this product.

Abbreviation

• “Network Camera” is called “Camera” in this manual.

BBHCA7A_IG.book  Page 2  Wednesday, January 20, 2010  3:46 PM