Panasonic BLPA100KTA - HD-PLC ETHERNET ADAPT.2PK Getting Started Manual
PQQX15017ZA
KK0306CH0
Printed in Japan
Getting Started
HD-PLC Ethernet Adaptor
Power Line Communication
Model No.
BL-PA100KTA
Included items
BL-PA100A
Pre-configured as the "master" adaptor,
as indicated by the seal affixed to the
top of the adaptor.
BL-PA100A
Pre-configured as the "terminal" adaptor.
AC Cord
Connects each adaptor to the wall outlet.
Example of an integrated HD-PLC network
See reverse side for installation instructions.
INTERNET
Master
PC
Network printer
Wall outlet
Wall outlet
Wall outlet
Hub
Network camera
Modem
Router
PC
Terminal
Terminal
(Add-on adaptor)
This document is written to be used with the BL-PA100KTA,
which is a pre-configured set of 2 adaptors.
No settings are required to use these adaptors.
Simply follow the instructions provided in this document.
Refer to the included Operating Instructions for safety,
reconfiguration, and troubleshooting information.
Additional adaptors
can be added later,
for a total of 16
adaptors including
the master.
See the Operating
Instructions for
details.
Set of 2 Adaptors (Master and Terminal)