Panasonic CS-A12ATP5 Operating Instructions Manual - page 6
5
HOW TO OPERATE
■ To start the operation
• Press 1.
• POWER indicator (green) on the indoor unit
will light up.
• To stop, press once more.
■ Setting Mode
• Press 2 to select:-
AUTO
– Automatic Operation
HEAT
– Heating Operation
COOL
– Cooling Operation
DRY
– Soft Dry Operation
PREPARATION BEFORE OPERATION
■ Indoor Unit
1
Connect the power supply cord to an independent
power supply.
■ Setting Temperature
• Press 3 to increase or decrease the temperature.
• The temperature can be set between 16°C ~ 30°C.
• Recommended temperature:
• During AUTO Operation, press 3 to select:-
•
Operation with 2°C higher than the standard
temperature.
•
Operation with the standard temperature.
•
Operation with 2°C lower than the standard
temperature.
● Standard Temperature
• At the beginning of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected according
to the indoor temperature.
• After the operation mode has been selected, the
mode does not change.
Operation
Cooling
Soft Dry
Heating
Standard
temperature
27°C
24°C
22°C
Indoor
temperature
25°C
21°C
OFF/ON
TEMP
MODE
FAN SPEED
AU
TO
TIMER
AIR SWING
ON/OFF
SET/C
RESET
2
3
5
4
1
AU
TO
HEA
T
DR
Y
FA
N
SP
EE
D
COOL
SLEEP
MANU
AL
6
COOL
26°C ~ 28°C
1°C ~ 2°C
DRY
lower than the
room temperature
HEAT
20°C ~ 24°C