Panasonic CS-A12CKP Operating Instructions Manual

Other manuals for CS-A12CKP: Service Manual, Operating Instructions Manual

Summary of CS-A12CKP

  • Page 1

    9 operating instructions safety precautions before operating, please read the following “safety precautions” carefully. ● to prevent personal injury, injury to others and property damage, the following instructions must be followed. ● incorrect operation due to failure to follow instructions will ca...

  • Page 2

    Name of each part ■ remote control ● remote control signal. • make sure it is not obstructed. • maximum distance : 10 m. • signal received sound. One short beep or one long beep. ● notes for remote control. • do not throw or drop. • do not get it wet. • certain type of fluorescent lamps may affect s...

  • Page 3

    Manual five stages of adjustment can be made between 14° ~ 36°. Manual five stages of adjustment can be made between 0° ~ 61°. Heat pump model manual five stages of adjustment can be made between 14° ~ 36°. Swing up/down automatically move up/down automatically manual five stages of adjustment can b...

  • Page 4

    ■ pre-season inspection ● is the discharged air cold/warm? Operation is normal if 15 minutes after the start of operation, the difference between the air intake and outlet vents temperature is:- ● are the air intake or outlet vents of the indoor or outdoor units obstructed? ● are the remote control ...

  • Page 5

    Troubleshooting ■ normal operation is it okay? • air conditioner has been restarted, but does not operate for 3 minutes. • a sound like water flowing can be heard. • it seems that fog is coming out from the air conditioner. • the room has a peculiar odour. • during automatic vertical airflow setting...

  • Page 6

    10 installation instructions required tools for installation works 1. Philips screw driver 5. Spanner 9. Gas leak detector 13. Multimeter 2. Level gauge 6. Pipe cutter 10. Measuring tape 14. Torque wrench 18 n.M (1.8 kgf.M) 42 n.M (4.2 kgf.M) 55 n.M (5.5 kgf.M) 3. Electric drill, hole core drill (ø7...