Panasonic CS-A281KR Operating Instructions Manual - page 11
10
HEAT – Heating Operation
Defrosting Operation
Depend on the outdoor temperature, the operation
occasionally stops to melt the frost on the outdoor
unit.
Heat is obtained from outdoor air to warm up the
room. When the outdoor ambient air temperature
falls, the heating capacity of the unit might be
reduced.
We recommend that you use an additional heating
device when the outdoor ambient air temperature
is low.
Automatic Airflow Volume
The speed of the indoor fan is adjusted automati-
cally according to the operation. The indoor fan
stops occasionally during cooling operation.
Automatic Airflow Volume
1
2
3
4
5
MANUAL
Press to select operation mode.
The display changes in the order
Press to start the operation.
Operation indication lamp (RED) will light up.
Press once more, to stop the operation.
each time the button is pressed.
Press to select airflow volume.
The display changes in the order.
Press to select room temperature.
Heating, Cooling, Soft Dry-Select temperature as desired.
(16
30
)
Automatic.
Press continuously.
The vertical airflow direction louver will move up and down. Release the
button when the louver is at the desired position.
Press
Cooling & Soft Dry – The vertical airflow direction louver will swing up and
down automatically.
Heating – When the discharge air temperature is low such as at the start
of heating operation, the cold air blows at horizontal level.
As the temperature rises, the hot air blows in a downwards
direction.
To stop the automatic airflow direction operation, press button.
Automatic
Low
Medium
High
AUTO FAN
AUTO
HEAT
COOL
DRY
2
lower than
standard
standard
2
higher than
standard
MANUAL
SWING
MODE
FAN SPEED
TEMP
SWING
MANUAL
OFF/ON
SWING