Panasonic CS-KS30NKU Operating Instructions Manual - page 10

10

4.  Night Setback Mode

Night Setback Mode is used for saving energy.

Press the NIGHT SETBACK button while unit is operating. (except 

FAN mode)

The 

 mark appears in the display.

To release the night setback function, press the NIGHT SETBACK 

button again.

Pressing the MODE selector button cancels Night Setback mode.

In Cooling and DRY Mode: (

and 

)

5.  QUIET Mode

QUIET Mode is used to reduce the fan sound of the indoor unit. 

Press the QUIET button.

The 

 mark appears in the display.

To cancel, press QUIET button again.

• In QUIET Mode, the fan rotates at a slower speed than the fan 

speed setting.

• If the unit is already operating with a very low airflow, the fan sound 

may not change even if the QUIET button is pressed.

6.  HIGH POWER Mode

HIGH POWER mode can be used to increase the output of the 

indoor unit for all operation modes.

Press the HIGH POWER button while unit is operating.

The 

 mark appears in the display. 

To cancel, press HIGH POWER button again.

• When the HIGH POWER button is pressed, the unit operates at 

maximum output for 30 minutes, regardless of the desired 

temperature. The fan speed is 1 step above “High”.

• QUIET Mode and HIGH POWER Mode cannot be used at the 

same time.

• Pressing the MODE selector button cancels HIGH POWER mode. 

• Depending on the operating conditions, the fan speed may be 

increased by a small amount only.

NOTE

When the night setback mode is selected, the air conditioner 

automatically raises the temperature setting 2 °F when 30 minutes 

have passed after the selection was made, and then another 2 °F 

after another 30 minutes have passed, regardless of the indoor 

temperature when night setback was selected. This enables you 

to save energy without sacrificing comfort. This function is 

convenient when gentle cooling is needed.

Setting

temperature

Press the NIGHT 

SETBACK button

30 min.

30 min.

Time

2 °F

2 °F

NOTE