Panasonic CS-XE12PKUA Operating Instructions Manual - page 8
8
To learn more...
Operation mode
AUTO
: During operation mode selection the POWER indicator blinks.
• Unit selects operation mode every 10 minutes according to setting temperature and room temperature.
HEAT
: Unit takes a while to warm up. The POWER indicator blinks during this operation.
COOL
: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.
DRY
: Unit operates at low fan speed to give a gentle cooling operation.
FAN
: To circulate air in the room.
ECONAVI and AUTO COMFORT
ECONAVI
AUTO
COMFORT
or
The unit will start to initialize
(for approximately 1 minute)
The human activity sensor
will start to detect.
Human activity sensor operation
Low activity
Normal activity
Human
Mode
Set
temperature
High activity
Absent
ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.
Low activity
Normal activity
Human
Mode
Set
temperature
High activity
Absent
Set
Fan Speed
AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human
comfortable consistently.
HEAT
COOL/DRY
HEAT
COOL/DRY
* During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.
** During human absence, maximum fan speed for COOL/DRY mode is medium fan.
+1 tap
0HGLXP)DQ
+1 tap*
+2°F / +1°C
+2°F / +1°C
+0.5°F / +0.3°C
-2°F / -1°C
-4°F / -2°C
+4°F /
+2°C
-4°F /
-2°C
-4°F / -2°C
+4°F /
+2°C
-4°F /
-2°C
The human activity sensor will also scan for area of heat source and movement in a room.
Detection area
• The human activity sensor performance is infl uenced by indoor unit location, movement
speed, temperature range, etc.
• The human activity sensor may:
- mistakenly detect an object with heat source & movement similar to human, such as
pets, etc.
- mistakenly detect as non-heat source & movement if a human stays motionless for
certain period of time.
• Do not place large objects near the sensor and keep away heating units or humidifi er
from the sensor’s detection area. They may cause sensor malfunction.
23ft/7m
120º