Panasonic DMP-BD60GA Service Manual - 2 Warning

Other manuals for DMP-BD60GA: Service Manual

Summary of DMP-BD60GA

  • Page 1

    ©panasonic corporation 2009. Unauthorized copying and distribution is a violation of law. Order no.Chm0903011ce blu-ray disc player model no. Dmp-bd60gn dmp-bd60ga dmp-bd60gz dmp-bd60gc dmp-bd60pu dmp-bd80gn vol. 1 colour (k).......................Black type.

  • Page 2: Table of Contents

    2 table of contents page page 1 safety precautions -----------------------------------------------3 1.1. General guidelines -----------------------------------------3 2 warning --------------------------------------------------------------4 2.1. Prevention of electrostatic discharge (esd) to electro...

  • Page 3: 1 Safety Precautions

    3 1 safety precautions 1.1. General guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, ins...

  • Page 4: 2 Warning

    4 2 warning 2.1. Prevention of electrostatic discharge (esd) to electrostatic sensitive (es) devices some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called elec- trostatic sensitive (es) devices. Examples of typical es devices are in...

  • Page 5

    5 2.2. Precaution of laser diode.

  • Page 6

    6 2.3. Service caution based on legal restrictions 2.3.1. General description about lead free solder (pbf) the lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservat...

  • Page 7: 3 Service Navigation

    7 3 service navigation 3.1. Service information.

  • Page 8: 4 Specifications

    8 4 specifications.

  • Page 9

    9.

  • Page 10

    10 5 location of controls and components followings are the location of controls and components for dmp-bd60eb/eg, bd80eb/eg as a sample. For other models, refer to each operating instructions..

  • Page 11: 6 Operating Instructions

    11 6 operating instructions 6.1. Taking out the disc from bd drive unit when the disc cannot be ejected by open/close button 6.1.1. Forcible disc eject 6.1.1.1. When the power can be turned off. 1. Turn off the power and press [pause] and [open/close] keys on the front panel simultaneously for 5 sec...

  • Page 12: 7 Service Mode

    12 7 service mode 7.1. Self-diagnosis and special mode setting 7.1.1. Self-diagnosis functions self-diagnosis function provides information for errors to service personnel by self-diagnosis display when any error has occurred. U**, h** and f** are stored in memory and held. You can check latest erro...

  • Page 13

    13 7.1.2. Special modes setting unsup- port unsupported disc error *an unsupported format disc was played, although the drive starts normally. *the data format is not supported, although the media type is supported. *exceptionally in case of the disc is dirty. This disc is incompatible. Display for ...

  • Page 14

    14 aging perform sequence of modes as * aging description shown below continually. Display following the then mode. When the power is on, press [pause], [play] and [open/ close] simultaneously for over 5 seconds and less than 10 seconds. Note1: if the unit has hung-up because of pressing keys for ov...

  • Page 15

    15 default setting the date of menu, mode and eeprom set- ting, etc. Is set to the default condition in fac- tory. Hello, bye are displayed. When the power is off, press [pause], [power] and [open/ close] simultaneously for 5 sec- onds. Item fl display key operation mode name description front key.

  • Page 16

    16 7.1.3. Service modes at a glance service mode setting: while the power is off, press [pause], [play] and [setup (remote controller)] simultaneously for five seconds. Item fl display key operation mode name description (remote controller key) release items item of service mode executing is cancell...

  • Page 17

    17 laser used time indication check laser used time (hours) of drive. L(****) is the used time display in hour. Llaser used time of bd/ dvd/ cd in playback/recording mode is counted. Press [4] [1] in service mode. Item fl display key operation mode name description (remote controller key).

  • Page 18

    18 bd drive last error bd drive error code display. 1. Error number is displayed for 5 seconds. 2. Please ignore this display. 3. Last drive error (1/2) is displayed for 5 seconds. 00 : bad disc 03 : bad disc 04 : bad disc or drive malfunction 4. Last drive error (2/2) is displayed for five seconds....

  • Page 19

    19 6. Disc maker id is displayed for 5 seconds. 7. Factor of drive error (hexadeci- mal) occurring is left displayed. In case that the maker cannot be identified, display is black out. Item fl display key operation mode name description (remote controller key).

  • Page 20

    20 cec (h) output check of the cec terminal high output of hdmi. Press [5] [5] in service mode. Cec (l) output check of the cec terminal low output of hdmi. Press [5] [6] in service mode. Tray open/close test the bd drive tray is opened and closed repeatedly. * is number of open/close cycle times. P...

  • Page 21: 8 Service Fixture & Tools

    21 8 service fixture & tools part number description pcs compatibility rfkz0216 extension cable (av out p.C.B. - digital p.C.B. / 23 pin) (only bd80) 1 same as eh55 series rfkz0168 extension cable (power p.C.B. - fan motor / 3 pin) 1 same as eh55 series rfkz0239 extension cable (front p.C.B. - digit...

  • Page 22

    22 9 disassembly and assembly instructions 9.1. Unit 9.1.1. Disassembly flow chart the following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser- vicing. To assemble the unit, reverse the steps shown in the chart below. 9.1.2. P....

  • Page 23

    23 9.1.3. Top case 1. Remove the 4 screws (a) and 3 screws (b). 2. Slide top case rearward and open the both ends at rear side of the top case a little and lift the top case in the direction of the arrows. 9.1.4. Front panel 1. Unlock 7 tabs (a) - (g) turn. Pull with the front panel in the direction...

  • Page 24

    24 2. Attach tray door ass’y in order from to : insert the shaft in the hole. : insert the shaft in the hole. 3. Confirm the tray door spring is attached as following. 9.1.6. Rear panel 1. Remove the fan connector from power p.C.B. 2. Remove the 5 screws (a) and screw (b). 3. Remove the 3 screws (c)...

  • Page 25

    25 2. Remove the wire with connector (a), (b). 3. Remove the connector (c). (bd80 only) 4. Remove the 6 screws (b) to remove digital p.C.B.. 5. Remove the 4 screws (c) to remove bd drive. 6. Put digital p.C.B. On bd drive and remove bdp/digital p.C.B. Module. 9.1.8. Power p.C.B. 1. Remove the wire w...

  • Page 26

    26 9.2. Bd drive 9.2.1. Upper base ass’y 1. Remove the 4 screws (a), and push the hook in. 2. Lift up the upper base ass’y, and pull it out to the direc- tion of arrow. 9.2.2. Tray 1. Perform the step “9.2.1. Upper base ass’y”. 2. Insert the eject pin into the hole of the bottom side, and slide it t...

  • Page 27

    27 4. Insert the eject pin into the hole of the tray at 45 degrees, and lean it to the direction of arrow with pushing the dotted point of the tray forward. Then the one side of the tray is come off from the drive. 5. Insert the eject pin into the tray as below figure, lift up the lever using the ej...

  • Page 28

    28 9.2.4. Slide cam 1. Perform the step “9.2.3. Pulley gear, belt”. 2. Disconnect the 3 ffcs. 3. Remove the 2 screws (b) and the angle. 4. Peel off coppery sheet from ffc (a) and remove the drive p.C.B. Caution: though the drive p.C.B. Is not supplied as replace- ment parts, it must be removed for a...

  • Page 29

    29 9.2.6. Grease.

  • Page 30

    30 9.2.7. How to clean the lens of optical pick-up follow the “9.2.1. Upper base ass’y.

  • Page 31

    31 10 measurements and adjustments 10.1. Service positions note: for description of the disassembling procedure, see the section 9. 10.1.1. Checking and repairing of power p.C.B..

  • Page 32

    32 10.1.2. Checking and repairing of bdp/digital p.C.B. Module.

  • Page 33

    33 10.1.3. Checking and repairing of av out p.C.B. (bd80 only).

  • Page 34

    34 10.1.4. Caution for replacing parts 10.1.4.1. Items that should be done after replacing parts note 1: download latest firmware and burn it on cd-r or cd-rw, and update firmware. 10.1.4.2. Standard inspection specifications after making repairs after making repairs, we recommend performing the fol...

  • Page 35: Service Manual

    S-1 s1. About indication of the schematic diagram ............................ S-1 s1.1. Important safety notice......................................................... S-1 s2. Voltage and waveform chart ................................................... S-2 s2.1. Audio out p.C.B. ...................

  • Page 36

    S-2 s2. Voltage and waveform chart s2.1. Audio out p.C.B. Note) indicated voltage values are the standard values for the unit measured by the dc electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on t...

  • Page 37

    S-3 s2.3. Front p.C.B. Ref no. Pin no. Pb stop ic1021 1 2.5 2.5 ic1021 2 1.6 1.6 ic1021 3 0 0 ic1021 4 2.9 2.9 ic1021 5 0 0 ic1021 6 7.5 7.5 ic1021 7 16.5 16.5 ic1021 8 - - ic1021 9 - - ic1101 1 8.4 8.4 ic1101 2 2.5 2.5 ic1101 3 0 0 ic1102 1 -15 -15 ic1102 2 - - ic1102 3 -16.4 -16.4 ic1102 4 -17.7 -...

  • Page 38

    S-4 s3. Block diagram s3.1. Power supply block diagram (fl on :on) fb s g fet fet cs ext d 7 5 6 8 4 q1104 (reg. Dr +5.8v) 1 2 3 8 v5 2 5 7 vin 1 ic1103 (dc-dc converter) 3 d1110 q1107 (fl on :on) 1 2 r ic1101 (error voltage det.) c a x sw +13v x sw +5.8v dr +5v dr +12v x sw +3.3v 10,11 4,5 p58001 p...

  • Page 39

    S-5 s3.2. Analog audio block diagram dmp-bd60gn/ga/gc/gz/pu, dmp-bd80gn analog audio block diagram jk4001 surround l out jk4001 front l out jk4001 front r out fl fr sl sr cnt sw mute audio digital 4 p4001 p54001 6 p4001 p54001 11 p4001 p54001 mute q4003 jk4001 surround r out 12 p4001 p54001 mute q40...

  • Page 40

    S-6 s3.3. Timer block diagram remocon 27 1 m dp7001 display timer sg1 sg1-sg16 gr1-gr7 p1 f+ f+ f- f- p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 7g 6g 5g 4g 3g 2g 1g sg16 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 6 29 gr7 gr1 36 42 8 9 10 11 12 13 7 xn +4v front p.C.B. Open sw p.C.B. ...

  • Page 41

    S-7 p1001 n a power p.C.B. Front p.C.B. Open sw p.C.B. Power sw p.C.B. Digital p.C.B. Bd drive unit av out p.C.B. For bd80 only 2 1 open/close gnd 2 1 open/close gnd 1 2 3 4 5 6 7 8 13 12 11 10 9 p1102 3 2 1 p7004 4 14 13 12 11 10 9 8 7 p save l fl on h dr p on h p stanby h gnd gnd gnd x sw5r8v x sw...

  • Page 42

    S-8 confidential until r4021 47k r4020 47k r4013 47k r4011 47k r 4 0 0 5 4 7 k r 4 0 0 3 4 7 k r4007 erj6geyj221v 820 r4006 820 r4014 820 r4012 220 r4015 r4001 erj6geyj221v r4009 220 820 r4022 820 r4019 220 r4024 r4017 220 r4008 d0hd821za002 r4004 820 r4002 d0hd821za002 r4010 d0hb821za002 d0hb821za0...

  • Page 43

    S-9 confidential until r4021 47k r4020 47k r4013 47k r4011 47k r 4 0 0 5 4 7 k r 4 0 0 3 4 7 k r4007 erj6geyj221v 820 r4006 820 r4014 820 r4012 220 r4015 r4001 erj6geyj221v r4009 220 820 r4022 820 r4019 220 r4024 r4017 220 r4008 d0hd821za002 r4004 820 r4002 d0hd821za002 r4010 d0hb821za002 d0hb821za0...

  • Page 44

    S-10 confidential until r4021 47k r4020 47k r4013 47k r4011 47k r 4 0 0 5 4 7 k r 4 0 0 3 4 7 k r4007 erj6geyj221v 820 r4006 820 r4014 820 r4012 220 r4015 r4001 erj6geyj221v r4009 220 820 r4022 820 r4019 220 r4024 r4017 220 r4008 d0hd821za002 r4004 820 r4002 d0hd821za002 r4010 d0hb821za002 d0hb821za...

  • Page 45

    S-11 confidential until r4021 47k r4020 47k r4013 47k r4011 47k r 4 0 0 5 4 7 k r 4 0 0 3 4 7 k r4007 erj6geyj221v 820 r4006 820 r4014 820 r4012 220 r4015 r4001 erj6geyj221v r4009 220 820 r4022 820 r4019 220 r4024 r4017 220 r4008 d0hd821za002 r4004 820 r4002 d0hd821za002 r4010 d0hb821za002 d0hb821za...

  • Page 46

    S-12 confidential until f+ dr12v dr5v fan_pwr fan_lock x_sw5r8v p_save_l f- vp 1 5 6 3 2 4 p7001 k1kb06b00033 drgnd lb7003 erj6gey0r00v lb7002 erj6gey0r00v erj6gey0r00v lb7001 $[vwj0795=5] k7005 erj3gey0r00v k7004 q7003 b1abgc000011 r7010 10k 2700 r7006 5600 r7007 r7008 $(330) 470[d] r7011 r 7 0 0 9...

  • Page 47

    S-13.

  • Page 48

    S-14 3 0 0 [ d ] r 1 1 1 8 1000 r1111 2200 r1112 $ ( 2 2 0 k ) r 1 1 1 4 erj3geyj472v r1120 erds2tj101t r1117 4700 r1104 $ ( 4 7 0 0 ) r 1 1 4 9 $ ( 3 3 0 0 ) r 1 1 2 7 2 2 k r 1 1 2 1 3 9 k [ d ] r 1 1 3 7 1 1 k [ d ] r 1 1 3 8 1 5 0 0 [ d ] r 1 1 3 6 2 2 k r 1 1 2 3 8 2 0 0 [ d ] r 1 1 4 2 2 2 0 0...

  • Page 49

    S-15 3 0 0 [ d ] r 1 1 1 8 1000 r1111 2200 r1112 $ ( 2 2 0 k ) r 1 1 1 4 erj3geyj472v r1120 erds2tj101t r1117 4700 r1104 $ ( 4 7 0 0 ) r 1 1 4 9 $ ( 3 3 0 0 ) r 1 1 2 7 2 2 k r 1 1 2 1 3 9 k [ d ] r 1 1 3 7 1 1 k [ d ] r 1 1 3 8 1 5 0 0 [ d ] r 1 1 3 6 2 2 k r 1 1 2 3 8 2 0 0 [ d ] r 1 1 4 2 2 2 0 0...

  • Page 50

    S-16 3 0 0 [ d ] r 1 1 1 8 1000 r1111 2200 r1112 $ ( 2 2 0 k ) r 1 1 1 4 erj3geyj472v r1120 erds2tj101t r1117 4700 r1104 $ ( 4 7 0 0 ) r 1 1 4 9 $ ( 3 3 0 0 ) r 1 1 2 7 2 2 k r 1 1 2 1 3 9 k [ d ] r 1 1 3 7 1 1 k [ d ] r 1 1 3 8 1 5 0 0 [ d ] r 1 1 3 6 2 2 k r 1 1 2 3 8 2 0 0 [ d ] r 1 1 4 2 2 2 0 0...

  • Page 51

    S-17 3 0 0 [ d ] r 1 1 1 8 1000 r1111 2200 r1112 $ ( 2 2 0 k ) r 1 1 1 4 erj3geyj472v r1120 erds2tj101t r1117 4700 r1104 $ ( 4 7 0 0 ) r 1 1 4 9 $ ( 3 3 0 0 ) r 1 1 2 7 2 2 k r 1 1 2 1 3 9 k [ d ] r 1 1 3 7 1 1 k [ d ] r 1 1 3 8 1 5 0 0 [ d ] r 1 1 3 6 2 2 k r 1 1 2 3 8 2 0 0 [ d ] r 1 1 4 2 2 2 0 0...

  • Page 52

    S-18 confidential until 1 8 6 4 2 3 5 7 9 1 0 k 1 k a 1 0 b 0 0 1 9 6 p 7 2 0 1 1 5 6 3 2 4 k 1 k a 0 6 b 0 0 1 5 0 p 7 2 0 2 2200[d] r7203 r7201 2200[d] r7208 $(10k) r7202 3900[d] r 7 2 0 4 3 9 0 0 [ d ] 33 r7205 0 r7206 * r7210 * r7211 * r7207 * r7209 s7206 evq11a04m s7202 evq11a04m s7204 evq11a04...

  • Page 53

    S-19 confidential until s7551 evq11a04m 1 2 $[rez1926│rez1928] pj7551 power_sw 2008/1/19 2pin flat cable 2.5mm pitch k e y _ p o w e r g n d [pr] rez1926:others rez1928:japan model evq11a04m s7581 1 2 $[rez1927│rez1929] pj7581 2009/1/19 2pin flat cable 2.5mm pitch gnd open/close open/close_sw [pr] r...

  • Page 54

    S-20 r 4 0 4 4 r 4 0 4 3 q 4 0 1 0 ckab4013 tl4004 tl4003 tl4002 tl4001 r 4 0 4 6 r4045 r 4 0 4 2 r 4 0 4 7 r 4 0 4 1 r4026 r4025 r 4 0 2 4 r4023 r4022 r4021 r4020 r4019 r4018 r4017 r 4 0 1 6 r4015 r 4 0 1 4 r 4 0 1 3 r 4 0 1 2 r4011 r 4 0 1 0 r4009 r 4 0 0 8 r4007 r 4 0 0 6 r4005 r 4 0 0 4 r 4 0 0 ...

  • Page 55

    S-21 w 2 7 w 2 9 w 2 8 w41 w58 w 2 6 w46 w47 w 9 w21 w 4 0 w 3 6 w 1 6 w42 w 5 4 w 6 0 w 3 8 w32 w 3 3 w 2 3 w 2 4 w4 w5 w10 w 3 w2 w1 w45 w 5 1 w44 w49 w50 w52 w53 w55 w56 w57 w43 w48 w 5 9 w 3 7 w 3 5 w 3 4 w31 w 1 5 w 1 7 w 2 5 w 1 8 w 1 4 w 2 0 w 1 3 w 2 2 w12 w62 w 8 w 7 w 1 1 w 6 1 w 3 9 w 1 9...

  • Page 56

    S-22 3.5 6 . 2 6 . 2 6. 2 3.5 1 . 5 1 . 5 3.5 3.5 1 . 5 1 . 5 3.5 l b 1 1 1 2 l b 1 1 1 1 c1042 r1044 r1104 qr1101 r1170 r 1 1 1 8 r 1 1 1 6 c 1 1 2 4 r 1 1 1 9 c 1 1 1 4 r 1 1 2 2 r 1 1 1 4 r 1 1 1 5 r 1 1 1 1 c 1 1 1 2 r 1 1 1 3 qr1105 r1112 r 1 1 4 9 r1052 r1051 r1043 r 1 0 4 2 r 1 0 4 1 qr1031 d...

  • Page 57

    S-23.

  • Page 58

    S-24 w 7 5 0 6 ib t3 ib t2 w7 50 3 w 7 5 0 1 w 7 5 0 2 w 7 5 0 5 w 7 5 0 4 n k 2 r7 21 0 q7 20 1 r 7 2 1 1 r 7 2 0 9 r7 20 6 r7 20 3 r7 20 4 r7 20 1 r7 20 2 r 7 2 0 7 r7 20 8 c7 20 3 r7 20 5 c7 20 2 w 7 0 0 8 w 7 0 0 1 w7 00 7 w 7 0 0 2 w7 00 5 w 7 0 0 4 w 7 0 0 3 w7 00 6 1 2 p j 7 2 0 4 d7 20 2 1 2...

  • Page 59

    S-25 w 7 5 0 6 ib t3 ib t2 w7 50 3 w 7 5 0 1 w 7 5 0 2 w 7 5 0 5 w 7 5 0 4 n k 2 r7 21 0 q7 20 1 r 7 2 1 1 r 7 2 0 9 r7 20 6 r7 20 3 r7 20 4 r7 20 1 r7 20 2 r 7 2 0 7 r7 20 8 c7 20 3 r7 20 5 c7 20 2 w 7 0 0 8 w 7 0 0 1 w7 00 7 w 7 0 0 2 w7 00 5 w 7 0 0 4 w 7 0 0 3 w7 00 6 1 2 p j 7 2 0 4 d7 20 2 1 2...

  • Page 60

    S-26 w 7 5 0 6 ib t3 ib t2 w7 50 3 w 7 5 0 1 w 7 5 0 2 w 7 5 0 5 w 7 5 0 4 n k 2 r7 21 0 q7 20 1 r 7 2 1 1 r 7 2 0 9 r7 20 6 r7 20 3 r7 20 4 r7 20 1 r7 20 2 r 7 2 0 7 r7 20 8 c7 20 3 r7 20 5 c7 20 2 w 7 0 0 8 w 7 0 0 1 w7 00 7 w 7 0 0 2 w7 00 5 w 7 0 0 4 w 7 0 0 3 w7 00 6 1 2 p j 7 2 0 4 d7 20 2 1 2...

  • Page 61

    S-27 w 7 5 0 6 ib t3 ib t2 w7 50 3 w 7 5 0 1 w 7 5 0 2 w 7 5 0 5 w 7 5 0 4 n k 2 r7 21 0 q7 20 1 r 7 2 1 1 r 7 2 0 9 r7 20 6 r7 20 3 r7 20 4 r7 20 1 r7 20 2 r 7 2 0 7 r7 20 8 c7 20 3 r7 20 5 c7 20 2 w 7 0 0 8 w 7 0 0 1 w7 00 7 w 7 0 0 2 w7 00 5 w 7 0 0 4 w 7 0 0 3 w7 00 6 1 2 p j 7 2 0 4 d7 20 2 1 2...

  • Page 62

    S-28 1 2 p j 7 5 5 1 s 7 5 5 1 1 2 p j 7 5 8 1 s 7 5 8 1 dmp-bd60/bd80gn series power sw p.C.B. Dmp-bd60/bd80gn series open sw p.C.B. 10 9 8 7 6 5 4 3 2 1 g f e d c b a (foil side) (component side) (foil side) (component side) s5.4. Power sw p.C.B. / s5.5. Open sw p.C.B..

  • Page 63: S6. Abbreviation

    S6. Abbreviation s-29 abbreviations a a0~up address aclk audio clock ad0~up address bus adata audio pes packet data ale address latch enable amute audio mute areq audio pes packet request arf audio rf asi servo amp inverted input aso servo amp output async audio word distinction sync b bck bit clock...

  • Page 64

    S-30 abbreviations initial/logo dreq data request dresp data response dsc digital servo controller dslf data slice loop filter dvd digital video disc e ec error torque control ecr error torque control reference encsel encoder select etmclk external m clock (81mhz/40.5mhz) etsclk external s clock (54...

  • Page 65

    S-31 abbreviations initial/logo pwmctl pwm output control pwmda pulse wave motor drive a pwmoa, b pulse wave motor out a, b r re read enable rfenv rf envelope rfo rf phase difference output rs (cd-rom) register select rsel rf polarity select rst reset rsv reserve s sbi0, 1 serial data input sbo0 ser...

  • Page 66

    S-32 abbreviations initial/logo tpso op amp output tpsp op amp inverted input trcrs track cross signal tron tracking on trson traverse servo on v vblank v blanking vcc collector power supply voltage vcdcont video cd control (tracking balance) vdd drain power supply voltage vfb video feed back vref v...

  • Page 67: S7. Replacement Parts List

    S7. Replacement parts list s-33 e.S.D. Standards for electrostatically sensitive devices, refer to “prevention of electrostatic discharge (esd) to electrostatically sensitive (es) devices” section. Of this assembly in production, it will no longer be available. All resistors are in ohms, k=1,000 ohm...

  • Page 68

    Dmp-bd60gn-k ref.No. Part no. Part name & description pcs remarks ref.No. Part no. Part name & description pcs remarks r4026 d0hd331za002 1/16w 330 1 80gn ## vep74117b av out p.C.B. 1 (rtl)80gn r4041 erj3geyj102v 1/10w 1k 1 80gn r4042 erj3geyj102v 1/10w 1k 1 80gn c4002 f1h1c104a071 16v 0.1u 1 80gn r...

  • Page 69

    Dmp-bd60gn-k ref.No. Part no. Part name & description pcs remarks ref.No. Part no. Part name & description pcs remarks d1123 b0jcpd000021 diode 1 r1033 erj3rbd163v 1/16w 16k 1 except pu d1125 b0jaml000004 diode 1 80gn r1034 erj3rbd153v 1/16w 15k 1 except pu d1126 maz41200hf diode 1 80gn r1035 erj3rb...

  • Page 70

    Dmp-bd60gn-k ref.No. Part no. Part name & description pcs remarks ref.No. Part no. Part name & description pcs remarks d1024 ma2j1110gl diode 1 60pu d1029 maz40910mf diode 1 60pu ## casing/accessory/packing ic1021 c0daczh00017 ic 1 60pu 1 vep71155c power p.C.B. 1 (rtl)60gn 60ga 60gz 60gc 1 vep71155d...

  • Page 71

    Dmp-bd60gn-k ref.No. Part no. Part name & description pcs remarks ref.No. Part no. Part name & description pcs remarks 53 rhd30101-1 screw 1 a3 k2ka6ba00004 av cord 1 54 rhd30119-l screw 1 a4 n2qayb000380 remote control unit 1 except pu 55 rhd30119-l screw 1 a4 n2qayb000378 remote control unit 1 60p...

  • Page 72: S8. Exploded View

    S8. Exploded view s8.1. Frame and casing section s-38 75 76 85 86 64 58 59 63 82 83 60 61 62 69 84 27 87 77 78 70 71 72 73 74 53 79 29 80 47 48 81 49 50 51 52 9 2 45 44 46 66 (bd80) 65 (bd80) 14 (bd80) 18 (bd60) 21 (bd60) 19 (bd60) 67 (bd80) (bd80) 20 (bd60) 15 (bd80) 12 (bd80) 68 (bd80) 16 (bd80) 1...

  • Page 73

    S8.2. Mechanism section s-39 101 106 102 104 110 111 109 108 103 105 107 122 123 125 124 126 127 128 129 112 119 120 113 114 115 118 121 116 117.

  • Page 74

    S8.3. Packing parts and accessories section s-40 a4 a8 (bd60pu) battery (remote cont.) a7 a6 a3 a1 a4-1 a5 pc1 pc2 pc3 pc4 a2 (bd60pu).