1. DL manuals
  2. Panasonic
  3. All in One Printer
  4. DP-6530
  5. Operating Instructions Manual

Panasonic DP-6530 Operating Instructions Manual

Manual is about: Panasonic Digital Imaging Systems Operating Instructions Model No. DP-6530/8130

Summary of DP-6530

  • Page 1

    Digital imaging systems operating instructions (for copy functions) model no. Dp-6530/8130 before operating this equipment, please read these instructions completely and keep these operating instructions for future reference. English.

  • Page 2

    1 warning : changes or modification made to this equipment, not expressly approved by panasonic or parties authorized by panasonic, could void the user's authority to operate the equipment. Use of recycled paper in the machine as with all machines and reproduction devices, the use of the appropriate...

  • Page 3

    11 epa e nergy s tar ® (mfd) the united states environmental protection agency (epa) has introduced a voluntary program, the e nergy s tar program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance and prevent pollu...

  • Page 4: Preface

    1 2 3 4 5 6 7 8 9 10 11 12 2 preface thank you for purchasing the digital imaging system dp-6530/8130. This operating instructions describes the following: • how to use the digital digital imaging system • how to inspect and carry out maintenance on the digital digital imaging system • how to remedy...

  • Page 5: Preface (Cont.)

    1 2 3 4 5 6 7 8 9 10 11 12 3 preface (cont.) features of the dp-6530/8130 the dp-6530/8130 is a digital imaging system which is high-speed, compact and high-durability. The dp-6530/8130 can read the image in the memory temporarily after scanning, so you can operate sorting/ grouping, etc. As well as...

  • Page 6: Table of Contents

    1 2 3 4 5 6 7 8 9 10 11 12 4 energy star .................................................................................................................................. 1 preface .........................................................................................................................

  • Page 7: Table of Contents (Cont.)

    1 2 3 4 5 6 7 8 9 10 11 12 5 4. Using the editing functions ............................................................................................... 4-1 1. Image shift ............................................................................................................................ ...

  • Page 8

    1 2 3 4 5 6 7 8 9 10 11 12 6 7. When the graphic symbols flash on the touch panel ........................................... 7-1 1. Description of the flashing graphic symbols ...................................................... 7-2 2. Add paper symbol ...............................................

  • Page 9: Disclaimer Notice

    1 2 3 4 5 6 7 8 9 10 11 12 7 the following notice sets out the exclusions and limitations of liability of panasonic (including its employees, agents and sub-contractors) to any purchaser or user ("user") of the dp-6530/8130, including its accessories, options and bundled software ("product") 1. The ...

  • Page 10: Precautions

    1 2 3 4 5 6 7 8 9 10 11 12 8 precautions 1. Installation 1 the dp-6530/8130 should be installed by a qualified service representative. Note: the packing material should be disposed of properly. 2 to obtain the best possible results, this machine should be used in conjunction with a dedicated ac powe...

  • Page 11: Precautions (Cont.)

    1 2 3 4 5 6 7 8 9 10 11 12 9 1 handle and use the machine gently and carefully. • do not place anything on the paper drawers or the original feeding tray. • never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur. • do no...

  • Page 12

    1 2 3 4 5 6 7 8 9 10 11 12 10 explanatory label class 1 laser product appareil a laser de classe 1 laser klasse 1 producto de laser de clase 1 >ps certification label product is certified by the manufacturer to comply with dhhs rule 21 cfr subchapter j appl i cable at the date of manufacture. Manufa...

  • Page 13: Precautions (Cont.)

    1 2 3 4 5 6 7 8 9 10 11 12 11 fixing the adjusters (stoppers) there are four adjusters (stoppers) located in front and rear bottom (two adjusters each) of the machine. After moving/installing the machine, be sure to turn the adjusters clockwise to fix them firmly on the ground. * to unlock the adjus...

  • Page 15: 1-1

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 1. Before making copies 1. Description of the digital imaging system and the optional equipment .......... 1-2 - main components ...................................................................................... 1-2 - optional equipment ...............................

  • Page 16: 1-2

    1 2 3 4 5 6 7 8 9 10 11 12 1-2 before making copies 1. Description of the digital imaging system and the optional equipment main components original scales control panel drawers paper size indicator feed side cover bypass guide toner bottle front cover exit cover power switch reversing automatic doc...

  • Page 17: 1-3

    1 2 3 4 5 6 7 8 9 10 11 12 1-3 optional equipment finisher 2-bin finisher (da-fs810) 2-bin saddle-stitch finisher (da-fs815) enables the use of sort, group and staple modes, plus the hole punch (available when the optional hole punch unit is installed) and saddle-stitch model. Hole punch unit (da-sp...

  • Page 18: 1-4

    1 2 3 4 5 6 7 8 9 10 11 12 1-4 before making copies 1. Description of the digital imaging system and the optional equipment (cont.) control panel total counter shows the total of copied paper since the set up of the machine. Help key when this key is pressed, the appropriate operation procedures are...

  • Page 19: 1-5

    1 2 3 4 5 6 7 8 9 10 11 12 1-5 function clear key when this key is pressed, all selected copy modes are cleared to default settings. Page 2-2 * automatic function clear right bottom of this page stop key use this key to stop an ongoing scan and copy operation. Page 2-15 start key press this key to s...

  • Page 20: 1-6

    1 2 3 4 5 6 7 8 9 10 11 12 1-6 before making copies 1. Description of the digital imaging system and the optional equipment (cont.) touch panel the following information is shown on the touch panel: machine status, operational instructions, cautionary messages, reproduction ratios, total copy quanti...

  • Page 21: 1-7

    1 2 3 4 5 6 7 8 9 10 11 12 1-7 clearing the functions selected the icons displayed on the screen are as follows (some icons may not appear on the screen): if you press any key that is half-tone shaded, the function selected is cleared. Also, if the machine is left inactive for approx. 45 seconds, th...

  • Page 22: 1-8

    1 2 3 4 5 6 7 8 9 10 11 12 1-8 before making copies while the above message is displayed, stopping printing due to paper jam, etc. Cancels the job of auto start. To clear this status, press the function clear or the stop key. 2. Turning on the power switch turning on the power switch/auto job start ...

  • Page 23: 1-9

    1 2 3 4 5 6 7 8 9 10 11 12 1-9 controlling the use of the machine with department codes 1 when the department code function is in use, the screen shown on the right appears immediately after the power switch is turned on or the auto-clear is carried out. 2 key in a registered department code (5-digi...

  • Page 25: 2-1

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 2. How to make copies 1. General copying procedures .................................... 2-2 2. Setting copy paper .......................................................... 2-4 - acceptable copy paper types and sizes ......................................................

  • Page 26: 2-2

    1 2 3 4 5 6 7 8 9 10 11 12 2-2 how to make copies initial (default) settings 1. General copying procedures after placing, or confirming that there is, paper in the drawers, place the originals. When the start key is pressed with any settings unchanged, copies are made in the initial (default) settin...

  • Page 27: 2-3

    1 2 3 4 5 6 7 8 9 10 11 12 2-3 - after starting copying, press the job status key on the control panel, then press the status key on the touch panel to indicate which drawer is in use. When paper runs out of each drawer, the empty drawer will flash. 6 once the final original has been scanned, press ...

  • Page 28: 2-4

    1 2 3 4 5 6 7 8 9 10 11 12 2-4 how to make copies feeder drawers tandem lcf external lcf (optional) sheet bypass paper type plain paper (17- 20 lb bond) thick 1 ( - 90 lb index) thick 2 ( -110 lb index) tab paper plain paper (17 - 20 lb bond) thick 1 (-90 lb index) thick 2 (-110 lb index) plain pape...

  • Page 29: 2-5

    1 2 3 4 5 6 7 8 9 10 11 12 2-5 pay attention to the following points: - avoid using paper that is specially treated or paper that was printed on another machine, and also avoid performing double copying on the same side of paper; this may cause a malfunction. - do not use paper with creases, wrinkle...

  • Page 30: 2-6

    1 2 3 4 5 6 7 8 9 10 11 12 2-6 how to make copies slide rail 2. Setting copy paper (cont.) changing the paper size of the drawer/setting the drawer for special uses the paper size of the drawers of the machine can be changed to desired size. The drawers can also be set for cover sheet, insertion, ta...

  • Page 31: 2-7

    1 2 3 4 5 6 7 8 9 10 11 12 2-7 8 press the job status key on the control panel, then the cassette key on the touch panel. 9 press the drawer key corresponding to that in which the paper size has been changed, then press the key of the paper size newly set. - chinese paper sizes (16k, 8k and 16k-r) c...

  • Page 32: 2-8

    1 2 3 4 5 6 7 8 9 10 11 12 2-8 how to make copies 2. Setting copy paper (cont.) changing the paper size of the drawer/setting the drawer for special uses (cont.) 3 press the drawer key corresponding to that in which the paper has been set, then press the key of the paper type newly set. - if you wan...

  • Page 33: 2-9

    1 2 3 4 5 6 7 8 9 10 11 12 2-9 setting place glass *1 reversing automatic document feeder *2 types of originals sheets three-dimensional objects books plain paper, recycled paper: 13.3 - 33.8 lb (1-sided original) 13.3 - 27.7 lb (2-sided original) maximum size width: 11.6” length: 17” width: 11.6” l...

  • Page 34: 2-10

    1 2 3 4 5 6 7 8 9 10 11 12 2-10 how to make copies 3. Setting originals (cont.) 1 raising the reversing automatic document feeder, place the original in the direction as shown in the illustration. - when using the book-type originals 2-sided copies ( page 3-8) or the dual-page ( page 4-5) function, ...

  • Page 35: 2-11

    1 2 3 4 5 6 7 8 9 10 11 12 2-11 when using the reversing automatic document feeder originals in progress automatically exit on or depending upon the size of originals. ..... Lt (letter), st-r (invoice-r) ..... Ld (ledger), lg (legal), lt-r (letter-r) when the papers exit on , pull up the stopper to ...

  • Page 36: 2-12

    1 2 3 4 5 6 7 8 9 10 11 12 2-12 how to make copies when the number of originals is too large to be set at one time, you can divide the originals into two to ten sets and set them one after another. To do so, place the first set of originals first, and press the continue key while the scanning is in ...

  • Page 37: 2-13

    1 2 3 4 5 6 7 8 9 10 11 12 2-13 4. Auto job start (job preset) while multi-copying is in process, you can reserve the next copy. 1 place the original(s). Page 2-9 2 press the start key. - up to 5 jobs including the current printing job can be stored in the memory. Place the originals of the 6th job ...

  • Page 38: 2-14

    1 2 3 4 5 6 7 8 9 10 11 12 2-14 how to make copies 5. Interrupt copying 4 after you have finished interrupt copying, press the interrupt key again. - the following message appears: select other copy modes as required. 3 press the start key. While multicopying is in progress, you can interrupt it and...

  • Page 39: 2-15

    1 2 3 4 5 6 7 8 9 10 11 12 2-15 1 press the stop key on the operational panel during the multicopying operation. If you want to stop the operation during scanning or multicopying, use the stop key. Stopping the scanning of the original 1 press the control panel stop key on the operational panel duri...

  • Page 40: 2-16

    1 2 3 4 5 6 7 8 9 10 11 12 2-16 how to make copies if data is waiting to be printed, you can delete them, or change the printing order. 7. Deleting or changing order of pending jobs deleting the job in the following procedure, you can delete the multicopying operation as well. 1 press the job status...

  • Page 41: 2-17

    1 2 3 4 5 6 7 8 9 10 11 12 2-17 changing the printing order 1 press the job status key on the control panel, then the job list key on the touch panel. 2 select the job you want to move. 3 press the move key, then press the position where the selected job is to move to. - the job to be moved will be ...

  • Page 42: 2-18

    1 2 3 4 5 6 7 8 9 10 11 12 2-18 how to make copies.

  • Page 43: 3-1

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 3. Setting of basic copy modes 1. Paper selection ................................................................ 3-2 - automatic paper selection (aps) .............................................................. 3-2 - manual paper selection ...........................

  • Page 44: 3-2

    1 2 3 4 5 6 7 8 9 10 11 12 3-2 setting of basic copy modes 4 press the start key. 1. Paper selection automatic paper selection (aps) - if the automatic paper selection mode is not selected, press the zoom··· key, then press the aps key on the next screen. - if the following messages are shown, proce...

  • Page 45: 3-3

    1 2 3 4 5 6 7 8 9 10 11 12 3-3 3 on the basic screen, press the drawer icon representing the desired paper size. 1 place paper in the drawer(s). Page 2-4 - when using this mode in bypass copying, be sure to specify the paper size. Page 5-10, 5-11 manual paper selection it may not be possible for the...

  • Page 46: 3-4

    1 2 3 4 5 6 7 8 9 10 11 12 3-4 setting of basic copy modes 2. Reduction and enlargement copying when placing originals on the glass, you can copy them at the reducing and enlarging rate of 25 to 400%. For the reversing automatic document feeder, you can make the copy at the reducing and enlarging ra...

  • Page 47: 3-5

    1 2 3 4 5 6 7 8 9 10 11 12 3-5 4 press the key corresponding to the original size. - using the original size and copy size, the correct reproduction ratio is computed and displayed on the screen. - other key page 5-14 specifying both original size and copy size 2 place the original(s). Page 2-9 3 pr...

  • Page 48: 3-6

    1 2 3 4 5 6 7 8 9 10 11 12 3-6 setting of basic copy modes 2. Reduction and enlargement copying (cont.) 3 press the drawer icon representing the desired copy paper size, then press the zoom···· key. - the copy paper size is selectable on the screen in step 4 as well. 4 press the up (or down ) key to...

  • Page 49: 3-7

    1 2 3 4 5 6 7 8 9 10 11 12 3-7 -12- -13- -15- -12- -13- -15- -13- -13- 3. Duplex copying (1-sided, 2-sided, book-type) this function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Original copy * cannot be used by ohp fil...

  • Page 50: 3-8

    1 2 3 4 5 6 7 8 9 10 11 12 3-8 setting of basic copy modes 3. Duplex copying (1-sided, 2-sided, book-type) (cont.) 3 press the key (shaded) on the right basic screen. - the default setting is 1-sided originals to 1-sided copies. Book-type originals 2-sided copies 1 follow the same procedure 1 to 3 a...

  • Page 51: 3-9

    1 2 3 4 5 6 7 8 9 10 11 12 3-9 3 select the book copying type. - press the right right key if copying should start at a right-hand page and end at a right-hand page. By the same token, you can choose from among the right left , left left and left right keys. 2 press the book 2 key. 6 place the first...

  • Page 52: 3-10

    1 2 3 4 5 6 7 8 9 10 11 12 3-10 setting of basic copy modes 7 turn to the next page, set the book again and press the start key. - repeat the procedure above until all your originals have been scanned. 8 after all your originals have been scanned, press the finished key. - press the copy final page ...

  • Page 53: 3-11

    1 2 3 4 5 6 7 8 9 10 11 12 3-11 - if the automatic density mode is not selected, press the manual key, then press the auto key on the next screen. 4. Copy density adjustment there are two types of image density adjustments: automatic mode (default setting) and manual mode. In the automatic mode, the...

  • Page 54: 3-12

    1 2 3 4 5 6 7 8 9 10 11 12 3-12 setting of basic copy modes 4. Copy density adjustment (cont.) - when the density level key is shown on the lower left of the screen, you can adjust the density manually on the basic screen. 4 press either or key to adjust the copy density to the desired level. - each...

  • Page 55: 3-13

    1 2 3 4 5 6 7 8 9 10 11 12 3-13 5. Selecting original mode according to the type of your originals, you can choose among the three image types: photo, text or text/ photo (default setting). The photo mode is suitable for copying photo originals whereas the text mode is preferable for copying origina...

  • Page 56: 3-14

    1 2 3 4 5 6 7 8 9 10 11 12 3-14 setting of basic copy modes 6. Quick access menu finishing copy and duplex modes can be performed at the same time on one display by pressing the quick button. The character and button sizes are enlarged, and the white characters are displayed on the black background ...

  • Page 57: 4-1

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 4. Using the editing functions 1. Image shift .......................................................................... 4-2 2. Edge erase .......................................................................... 4-4 3. Dual-page .........................................

  • Page 58: 4-2

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 using the editing functions 1. Image shift 1 place paper in the drawer(s). Page 2-4 - when using this mode in bypass copying, be sure to specify the paper size. Page 5 -10, 5 -11 a margin for binding is created by shifting the original image to either the right or left...

  • Page 59: 4-3

    1 2 3 4 5 6 7 8 9 10 11 12 4-3 1 press the edit key to enter the edit menu, and press the image shift key. 3 adjust the width of the margin, then press the set key. - the default width of the margin is 14mm (0.551”). - to adjust the width, press the 2mm or 30mm key to select the desired number, then...

  • Page 60: 4-4

    1 2 3 4 5 6 7 8 9 10 11 12 4-4 using the editing functions 3 press the edit key to enter the edit menu, and press the edge erase key. Select other copy modes as required. 5 press the start key. 2. Edge erase if your original has a dirty or torn edge, it may be reproduced as a black mark on the copy....

  • Page 61: 4-5

    1 2 3 4 5 6 7 8 9 10 11 12 4-5 2 press the edit key to enter the edit menu, and press the dual page key. 5 if you need a binding margin, set the left margin. Page 4-2 select other copy modes as required. 4 press the basic key to enter the basic menu, then select lt (or a4, b5) copy size. Page 3-2 1 ...

  • Page 62: 4-6

    1 2 3 4 5 6 7 8 9 10 11 12 4-6 using the editing functions 7 turn to the next page, set the book again and press the start key. - repeat the above procedure until all your originals have been scanned. 8 after all your originals have been scanned, press the finished key. - press the copy final page k...

  • Page 63: 4-7

    1 2 3 4 5 6 7 8 9 10 11 12 4-7 5 press the lower set key. 4 set the reproduction ratios for the x (horizontal) and y (vertical) directions, respectively. - using the 25%400% keys on the screen (use 100% key if you want the same size as original.), set the reproduction ratio for x and press the upper...

  • Page 64: 4-8

    1 2 3 4 5 6 7 8 9 10 11 12 4-8 using the editing functions 3 press the trim (or mask ) key. 2 press the edit key to enter the edit menu, and press the editing key. 5. Image editing you can select an area on an original and copy it with the area trimmed (only the inside of the area copied) or masked ...

  • Page 65: 4-9

    1 2 3 4 5 6 7 8 9 10 11 12 4-9 6 enter the distance values read in step 5 for the specified area. - key in the value for x1 with the digital keys and press the upper set key. - similarly, set the values for x2, y1 and y2. - when setting x1, x2, y1 and y2, the original scale automatically changes to ...

  • Page 66: 4-10

    1 2 3 4 5 6 7 8 9 10 11 12 4-10 using the editing functions select other copy modes as required. 5 press the start key. 3 press the edit key to enter the edit menu, and press the editing key. Copies are made with images completely reversed in terms of right and left. Mirror image 2 place the origina...

  • Page 67: 4-11

    1 2 3 4 5 6 7 8 9 10 11 12 4-11 select other copy modes as required. 5 press the start key. 2 place the original(s). Page 2-9 3 press the edit key to enter the edit menu, and press the editing key. Negative/positive reversal the white area of originals copying black, and the black area of originals ...

  • Page 68: 4-12

    1 2 3 4 5 6 7 8 9 10 11 12 4-12 using the editing functions when a copy is turned with the line —·—·— as a pivot, originals are printed on side 2 (back face) as shown. 6. 2 in 1 / 4 in 1 this feature allows multiple originals to be reduced and copied onto a single sheet which size is the same size a...

  • Page 69: 4-13

    1 2 3 4 5 6 7 8 9 10 11 12 4-13 select other copy modes as required. 6 press the start key. - when placing an original on the glass, perform steps 5 and 6 on page 2-3 as needed. 4 select the type of image combination. - press the 2in1 (or 4in1 , 2in1 , duplex or 4in1 duplex ) key. 5 select the type ...

  • Page 70: 4-14

    1 2 3 4 5 6 7 8 9 10 11 12 4-14 using the editing functions copies are made with the current date and time, at which they are made, printed on the copy. Date and time printed at the bottom of the portrait copy date and time printed at the top of the landscape copy 2 place the original(s). Page 2-9 3...

  • Page 71: 4-15

    1 2 3 4 5 6 7 8 9 10 11 12 4-15 this feature allows numbers to be added at specified position to copies. Page number printed at the bottom center on the portrait copy. Page number printed at the top right on the landscape copy. 8. Page numbering copying 3 2 1 3 press the edit key to enter the edit m...

  • Page 72: 4-16

    1 2 3 4 5 6 7 8 9 10 11 12 4-16 using the editing functions the magazine sort mode allows 1-sided originals to be copied and sorted so that they can be folded and bound along a center line like typical magazines or booklets. Example of copying a 12-page document • if used in combination with the opt...

  • Page 73: 4-17

    1 2 3 4 5 6 7 8 9 10 11 12 4-17 - if the optional saddle stitch finisher (mj-1018, mj-1021) is installed, copies can be automatically stapled along their center line. To have copies stapled, press the staple on key. - maximum number of sheets that can be stapled page 6-7 select other copy modes as r...

  • Page 74: 4-18

    1 2 3 4 5 6 7 8 9 10 11 12 4-18 using the editing functions a top cover and/or back cover (special sheets, e.G. Colored paper) can be added to each set of copies. - adding a blank cover - adding a copied cover - adding a blank cover and a blank back cover - adding a copied cover and blank back cover...

  • Page 75: 4-19

    1 2 3 4 5 6 7 8 9 10 11 12 4-19 5 select the desired cover sheet key: to add a blank top cover: top blank to add a copied top cover: top copied to add blank top and back covers: both blank to add copied top and blank back covers: top copied back blank 6 press the basic key to enter the basic menu, a...

  • Page 76: 4-20

    1 2 3 4 5 6 7 8 9 10 11 12 4-20 using the editing functions tab paper back guide slide rail 11. Tab paper mode tab paper copy and insertion are available. Copy on tab: copying on tab paper blank tab insert: inserting blank tab paper prior to a selected page copied tab insert: combination of copying ...

  • Page 77: 4-21

    1 2 3 4 5 6 7 8 9 10 11 12 4-21 to copy on tab paper, adjust both the tab width and the shift width for the drawer and the bypass guide respectively. Tab width adjustment setting tab paper in the bypass guide 1 align the tab paper with the original. 2 place the tab paper with face up on the bypass g...

  • Page 78: 4-22

    1 2 3 4 5 6 7 8 9 10 11 12 4-22 using the editing functions tab width align the tab paper with the original scale original scale shift width align the original with the original scale original scale 11. Tab paper mode (cont.) 2 press the tab extension key. 3 press the cassette key (or the bypass fee...

  • Page 79: 4-23

    1 2 3 4 5 6 7 8 9 10 11 12 4-23 1 place tab paper in the drawer or the bypass guide. - for placing it in the drawer page 4-22 - for placing it in the bypass guide page 4-23 copying on tab paper at the value in the tab width set mode ( page 4-23). 2 place the original(s). Page 2-9 tab paper copying 3...

  • Page 80: 4-24

    1 2 3 4 5 6 7 8 9 10 11 12 4-24 using the editing functions 5 key in the page number you selected for the insertion of the tab paper , then press the upper set key. - when two sheets of paper or more are inserted, repeat this operation. Up to 15 sheets of paper can be inserted. 6 press the lower set...

  • Page 81: 4-25

    1 2 3 4 5 6 7 8 9 10 11 12 4-25 5 key in the page number you selected for the insertion of the tab paper, then press the upper set key. - when two sheets of paper or more are inserted, repeat this operation. Up to 15 sheets of paper can be inserted. 6 press the lower set key. Select other copy modes...

  • Page 82: 4-26

    1 2 3 4 5 6 7 8 9 10 11 12 4-26 using the editing functions 1 place the original(s). Page 2-9 2 press the edit key to enter the edit menu, and press the document storage key. - if the desired function keys are not displayed, press the next key to change the menu screen. 12. Document storage this fea...

  • Page 83: 4-27

    1 2 3 4 5 6 7 8 9 10 11 12 4-27 5 press the start key. - the memorization process starts automatically. - to change the file name, select the id you want to change in the list on the display, press the file name column, delete the file name already entered with the b space key in the letter entry sc...

  • Page 84: 4-28

    1 2 3 4 5 6 7 8 9 10 11 12 4-28 using the editing functions 13. Overlay this function stores the images that you frequently use and makes copies by overlaying onto the copied originals. - 24 different images can be stored. * the stored image cannot be printed with reduction and enlargement. However,...

  • Page 85: 4-29

    1 2 3 4 5 6 7 8 9 10 11 12 4-29 confirming stored image (test print) 1 perform steps 2 and 3. Page 4-29 2 press the file name you desire (the selected file name will be shaded), then press the test print key. - the stored image starts printing out. Deleting image 1 perform steps 2 to 3. Page 4-29 2 ...

  • Page 86: 4-30

    1 2 3 4 5 6 7 8 9 10 11 12 4-30 using the editing functions 13. Overlay (cont.) overlaying originals with stored image 4 press the overlay key. 5 press the file name you desire (the selected file name will be shaded), and press the set key. 3 press the edit key to enter the edit menu, and press the ...

  • Page 87: 4-31

    1 2 3 4 5 6 7 8 9 10 11 12 4-31 14. Sharpness adjustment 5 press the set key. Select other copy modes as required. 2 place the original(s). Page 2-9 3 press the edit key to enter the edit menu, and press the sharpness key. - if the desired function keys are not displayed, press the next key to chang...

  • Page 88: 4-32

    1 2 3 4 5 6 7 8 9 10 11 12 4-32 using the editing functions 15. Direction of duplex copy images (rotation) when lengthld (ledger) paper is copied under the mode of 1-sided originals to 2-sided copies, 2-sided originals to 1-sided copies, this function allows you to adjust the direction for ‘side-by-...

  • Page 89: 5-1

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 5. Using special functions 1. Continuous original feeding / single original feeding .................. 5-2 2. Mixed-sized originals ..................................................... 5-4 3. Job memory ....................................................................

  • Page 90: 5-2

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 using the special functions select other copy modes as required. 5 press the start key. When the number of originals is too large to be set at one time, you can divide the originals into two to ten sets and set them one after another. To do so, place the first set of o...

  • Page 91: 5-3

    1 2 3 4 5 6 7 8 9 10 11 12 5-3 single-feed mode 3 press the sadf key. Select other copy modes as required. 4 place an original. Page 2-9 - the original is automatically pulled in and the screen changes as shown on the right. - if there are more originals, set them in the same way. (the same operatio...

  • Page 92: 5-4

    1 2 3 4 5 6 7 8 9 10 11 12 5-4 using the special functions 3 press the program key to enter the program menu, and press the mixed original sizes key. 2. Mixed-sized originals select other copy modes as required. 6 press the start key. 2 adjust the slide to the widest paper size, and align the origin...

  • Page 93: 5-5

    1 2 3 4 5 6 7 8 9 10 11 12 5-5 2 press the program key to enter the program menu, and press the job memory key. 3. Job memory storing a combination of copy job settings you can store and recall a combination of frequently used copy jobs at anytime. Up to four such combinations of jobs can be stored....

  • Page 94: 5-6

    1 2 3 4 5 6 7 8 9 10 11 12 5-6 using the special functions 4 press the recall key. 3. Job memory (cont.) 2 place the original(s). Page 2-9 5 press the memory number key where the desired combination of copy job settings are stored. - memory number keys where copy jobs have been already stored are sh...

  • Page 95: 5-7

    1 2 3 4 5 6 7 8 9 10 11 12 5-7 to confirm the copy modes stored in the memory number key, perform steps 3 to 5 on the previous page, then press the settings key. Confirming stored copy jobs - the screen on the right is an example of jobs that have been stored in “memory 2”..

  • Page 96: 5-8

    1 2 3 4 5 6 7 8 9 10 11 12 5-8 using the special functions max 4. Bypass copying when you want to make copies on thick paper, ohp film, tab paper, tracing paper, sticker labels, use the sheet bypass. (only thick and tab papers can be set in the drawer. Page 2-7) if the desired size of paper (standar...

  • Page 97: 5-9

    1 2 3 4 5 6 7 8 9 10 11 12 5-9 4 after selecting the paper type corresponding to the type of the paper that has been set, press the set key. - when selecting ohp film, the hole punch mode and the staple mode cannot be used. If you select the paper type not corresponding to the type of the paper that...

  • Page 98: 5-10

    1 2 3 4 5 6 7 8 9 10 11 12 5-10 using the special functions 4. Bypass copying (cont.) bypass copying on standard size paper 1 perform steps 1 to 2 on pages 5-8, 5-9. -set the "other" size key as necessary. Page 5-14 2 press the key of the same type as the paper that has been set. -non-standard size ...

  • Page 99: 5-11

    1 2 3 4 5 6 7 8 9 10 11 12 5-11 2 press the non-standard key. 1 perform steps 1 to 3 on page 5-10. The size of non-standard paper is within the following ranges: length: 100 - 297mm (3.94” - 11.69”) width: 148 - 432mm (5.83” - 17.01”) 3 key in each dimension (length and width), or recall the data st...

  • Page 100: 5-12

    1 2 3 4 5 6 7 8 9 10 11 12 5-12 using the special functions 3 press the desired memory number key. - when the paper size is ‘0mm’, the selected memory number key is vacant. - when the paper size is displayed, a non-standard size is already stored in the selected memory number key. To delete the sett...

  • Page 101: 5-13

    1 2 3 4 5 6 7 8 9 10 11 12 5-13 5. Weekly timer using the built-in weekly timer, you can have the machine automatically turned on and off at specified times. For instance, you can set the timer for the starting time and closing time of your office so that the machine will automatically turn itself o...

  • Page 102: 5-14

    1 2 3 4 5 6 7 8 9 10 11 12 5-14 using the special functions when original or paper size is required to be specified and you need to specify it to ‘other’ size (except for non-standard size), this function should be used. - this function allows the other key on the screen on the right to recognize th...

  • Page 103: 5-15

    1 2 3 4 5 6 7 8 9 10 11 12 5-15 2 key in the year (last two digits only), month, date, day of the week, time (24-hour format) and minutes, in this order from the left-hand column. - press the key to move to the next entry column. Example: to enter 2002 / november ...., 0 4 1 1 .... * numbers corresp...

  • Page 104: 5-16

    1 2 3 4 5 6 7 8 9 10 11 12 5-16 using the special functions press the energy saver or start key on the control panel. The machine starts to warm itself up. 8. Setting the automatic energy save mode this function allows the machine automatically to go into the energy saving mode (unnecessary electric...

  • Page 105: 5-17

    1 2 3 4 5 6 7 8 9 10 11 12 5-17 turn on the power switch once again when the machine is in the off-mode. Press the start key during the sleep mode. The machine starts to warm itself up. Clearing the off-mode/sleep mode 1 press the program key to enter the program menu, and press the auto shut off ke...

  • Page 106: 5-18

    1 2 3 4 5 6 7 8 9 10 11 12 5-18 using the special functions 1 press the program key to enter the program menu, and press the change languages key. - if the desired function keys are not displayed, press the next key to change the menu screen. 10. Switching languages the language used on the touch pa...

  • Page 107: 5-19

    1 2 3 4 5 6 7 8 9 10 11 12 5-19 11. User selection (initial settings) 1 press the program key to enter the program menu, and press the user selection key. - if the desired function keys are not displayed, press the next key to change the menu screen. 2 press the icons of the settings you desire (sel...

  • Page 108: 5-20

    1 2 3 4 5 6 7 8 9 10 11 12 5-20 using the special functions 12. Department codes you can administer the copy quantity of each group by setting a department code for each purpose (machine and printer ). Up to 500 codes can be set. * you need a master code to be registered when you use this function f...

  • Page 109: 5-21

    1 2 3 4 5 6 7 8 9 10 11 12 5-21 5 input the master code name, and press the set key. - entering letters page 5-29 (max. 36 characters) 6 key in the desired master code (the same number) both for “new code” and for “retype new code”, and press the set key. - the master code is 5 digits (“00000” is in...

  • Page 110: 5-22

    1 2 3 4 5 6 7 8 9 10 11 12 5-22 using the special functions 12. Department codes (cont.) 2 key in the master code or the department code (5 digits), then press set key. - registration of department code as shown below input the master code for using “set department codes” and “reset all counters”. 3...

  • Page 111: 5-23

    1 2 3 4 5 6 7 8 9 10 11 12 5-23 2 press the enable key, then set key. 3 press the department number where you want to register the department code, and press the change key. 4 input the department name and press the set key. - entering letters page 5-29 5 key in the desired department code (the same...

  • Page 112: 5-24

    1 2 3 4 5 6 7 8 9 10 11 12 5-24 using the special functions 12. Department codes (cont.) changing a specific department code 1 press the set department codes key in the department menu. 2 press the enable key, then set key. 3 press the department number where you want to change the department code, ...

  • Page 113: 5-25

    1 2 3 4 5 6 7 8 9 10 11 12 5-25 5 input the department name you want to register, and press the set key. - entering letters page 5-29 (max. 36 characters) 6 key in the former department code for “current code” and the new department code both for “new code” and “retype new code”, and press the lower...

  • Page 114: 5-26

    1 2 3 4 5 6 7 8 9 10 11 12 5-26 using the special functions 12. Department codes (cont.) 3 press the department number where you want to delete the department code, and press the delete key. 4 press the yes key. - deleting of the selected department code is completed. Clearing a specific department ...

  • Page 115: 5-27

    1 2 3 4 5 6 7 8 9 10 11 12 5-27 3 press the department number you want to clear the counter, and press the reset counters key. 1 press the set department codes key in the department code menu. 2 press the disable key, then the set key. - disabling set is completed. If you want to enable the departme...

  • Page 116: 5-28

    1 2 3 4 5 6 7 8 9 10 11 12 5-28 using the special functions print out department code *this function prints out the number of copies output for each department. 1 press the print out department codes key in the department code menu. - printing starts. Clearing all counters this function clears all c...

  • Page 117: 5-29

    1 2 3 4 5 6 7 8 9 10 11 12 5-29 the following screen is provided for entering letters. * to enter numbers, use the digital keys on the control panel. The following keys are used to enter letters. - caps lock ............... Press this key to switch capital letters and small letters. - b space .........

  • Page 118: 5-30

    1 2 3 4 5 6 7 8 9 10 11 12 5-30 using the special functions 13. Entering letters (cont.) 1 press the b space key to delete “meeting”. 2 press the caps lock key to enter the capital letters. Example: correct “meeting” to “meeting”. 3 press the e , t , i , n and g keys. 4 press the set key to fix the ...

  • Page 119: 5-31

    1 2 3 4 5 6 7 8 9 10 11 12 5-31 5 press the b space key to delete “m”. 6 press the n key to enter “n”, then the set key to fix the entered characters. 4 press the key to move the cursor to (under) “g”. 3 press the e , e , t , i , m and g keys..

  • Page 120: 5-32

    1 2 3 4 5 6 7 8 9 10 11 12 5-32 using the special functions.

  • Page 121: 6-1

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 6. Selecting finishing modes (using the optional finishers) 1. Finishing modes and finishers (optional) ............... 6-2 2. Sort/group copying........................................................ 6-3 3. Staple sorting (optional) .....................................

  • Page 122: 6-2

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 selecting finishing modes 1. Finishing modes and finishers (optional) there are 2 types of optional finishers (2-bin finisher/da-fs810 and 2-bin saddle-stitch finisher/da-fs815). Functions available differ depending on whether a finisher is installed and which type of ...

  • Page 123: 6-3

    1 2 3 4 5 6 7 8 9 10 11 12 6-3 select other copy modes as required. 5 press the start key. 2. Sort/group copying to make multiple copies, you can select the sort mode or group mode as necessary. The paper sizes available for sort/group copying are ld (ledger), lg (legal), lt (letter) and lt-r (lette...

  • Page 124: 6-4

    1 2 3 4 5 6 7 8 9 10 11 12 6-4 selecting finishing modes 2 place the original(s). Page 2-9 3. Staple sorting (optional) 1 place paper in the drawer(s). Page 2-4 - when using this mode in bypass copying ( page 5-8), be sure to specify the paper size. When the optional finisher is installed, you can u...

  • Page 125: 6-5

    1 2 3 4 5 6 7 8 9 10 11 12 6-5 5 press the start key. - if the paper quantity exceeds the maximum number of sheets that can be stapled, the finisher automatically enters the sort mode. 4 press the single staple-1 (or double staple , single staple-2 ) key. Select other copy modes as required. Maximum...

  • Page 126: 6-6

    1 2 3 4 5 6 7 8 9 10 11 12 6-6 selecting finishing modes 12 3 2 1 11 2 9 4 7 6 5 8 3 10 1 12 7 6 7 6 12 3 2 1 3 place the original(s). Page 2-9 - when placing them in the reversing automatic document feeder, set them by referring to the order of pages in the illustrations above. - when placing them ...

  • Page 127: 6-7

    1 2 3 4 5 6 7 8 9 10 11 12 6-7 5 press the magazine sort ( or magazine sort & saddle stitch or saddle stitch ) key. - if the desired function keys are not displayed, press the next key to change the menu screen. 4 press the key on the basic screen as shown on the right (shaded). Available conditions...

  • Page 128: 6-8

    1 2 3 4 5 6 7 8 9 10 11 12 6-8 selecting finishing modes 2 place the original(s). Page 2-9 3 press the key on the basic screen as shown on the right (shaded). 4 press the hole punch key. - if the desired function keys are not displayed, press the next key to change the menu screen. 5. Hole punch mod...

  • Page 129: 7-1

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 7. When the graphic symbols flash on the touch panel 1. Description of the flashing graphic symbols .... 7-2 2. Add paper symbol ............................................................. 7-3 - adding paper to the drawers ...............................................

  • Page 130: 7-2

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 when the graphic symbols flash on the touch panel 1. Description of the flashing graphic symbols the graphic display on the touch panel shows the status of the machine. When one of the graphic symbols flashes, take the appropriate action referring to the page shown. Wh...

  • Page 131: 7-3

    1 2 3 4 5 6 7 8 9 10 11 12 7-3 side guide approx. 0.5mm approx. 0.5mm side guide slide rail adding paper to the drawers 1 pull the drawer out carefully until it comes to a stop. - be careful not to touch the drawer slide rail. 2 place the paper in the drawer. - place the paper face down. - maximum n...

  • Page 132: 7-4

    1 2 3 4 5 6 7 8 9 10 11 12 7-4 when the graphic symbols flash on the touch panel max slide rail a b 1 pull the tandem lcf out carefully until it comes to a stop. - be careful not to touch the drawer slide rail. 2 open some packages of paper, take out entire reams of paper and set them aligned in tra...

  • Page 133: 7-5

    1 2 3 4 5 6 7 8 9 10 11 12 7-5 max slide rail adding paper to the external lcf (large capacity feeder) (optional) 1 pull the external lcf out carefully until it comes to a stop. - be careful not to touch the drawer slide rail. 2 place the paper on the elevator tray. - place the paper face up. - maxi...

  • Page 134: 7-6

    1 2 3 4 5 6 7 8 9 10 11 12 7-6 when the graphic symbols flash on the touch panel here at panasonic dependable high quality image output is what we do. By using genuine panasonic toner you can ensure that you are not only receiving quality output but also output that is friendly to mother earth and h...

  • Page 135: 7-7

    1 2 3 4 5 6 7 8 9 10 11 12 7-7 label (orange) shutter (orange) holder 2 rotate the left end of the holder, then pull out the empty toner bottle with both hands as shown on the right. Return used toner bottles to your service technician. 3 shake the new toner bottle well to loosen the toner inside. 4...

  • Page 136: 7-8

    1 2 3 4 5 6 7 8 9 10 11 12 7-8 when the graphic symbols flash on the touch panel type of originals a. B. C. A 20,000 30,000 40,000 50,000 60,000 70,000 74,000 a 20,000 30,000 40,000 46,000 b 20,000 27,000 15,000 c a 20,000 30,000 38,000 replace toner bag - when the toner bag becomes full of used ton...

  • Page 137: 7-9

    1 2 3 4 5 6 7 8 9 10 11 12 7-9 reversing automatic document feeder inside of the machine bypass guide external lcf (optional) hole punch unit (optional) finisher (optional) saddle stitch unit (optional) when a paper misfeed occurs in the machine, the or symbol flashes in the positions where the pape...

  • Page 138: 7-10

    1 2 3 4 5 6 7 8 9 10 11 12 7-10 when the graphic symbols flash on the touch panel paper misfeed in the reversing automatic document feeder 2 rotate the blue knob to remove any misfed originals. 1 push the button on the reversing automatic document feeder to open the cover. 3 lift the blue handle (fi...

  • Page 139: 7-11

    1 2 3 4 5 6 7 8 9 10 11 12 7-11 7 lifting the handle in the direction of the arrow, pull it toward you. 6 open the original exit tray and remove any misfed originals. 8 remove any misfed originals. 5 lift the original feeding tray and remove any misfed originals. 4 lift the blue handle (second) as s...

  • Page 140: 7-12

    1 2 3 4 5 6 7 8 9 10 11 12 7-12 when the graphic symbols flash on the touch panel paper misfeed inside of the machine 1 open the paper feed cover. - when installing the external lcf (optional), open the paper cover after doing step 1 of page 7-15. 3 open the bypass cover. 2 remove any misfed paper. ...

  • Page 141: 7-13

    1 2 3 4 5 6 7 8 9 10 11 12 7-13 6 remove any misfed paper. - if any paper is misfed in the cover, pull it out. Caution do not touch the metal area of guide plate in the automatic duplexer. You might burn yourself. - if any paper is misfed in the machine, open the front cover and remove any misfed pa...

  • Page 142: 7-14

    1 2 3 4 5 6 7 8 9 10 11 12 7-14 when the graphic symbols flash on the touch panel metal area fuser unit - if a sheet of paper is misfed on the transfer belt, remove it. - do not put some objects on the transfer belt or do not touch it. - when a sheet of paper is caught in fuser unit, do not pull out...

  • Page 143: 7-15

    1 2 3 4 5 6 7 8 9 10 11 12 7-15 1 pull up the misfed paper slowly on the bypass guide. Paper misfeed on the bypass guide paper misfeed in the external lcf (large capacity feeder) (optional) 2 remove any misfed paper by turning the blue knob in the direction of the arrow. 1 pull the external lcf away...

  • Page 144: 7-16

    1 2 3 4 5 6 7 8 9 10 11 12 7-16 when the graphic symbols flash on the touch panel 4 open the cover of the external lcf and remove any misfed paper. - be careful not to touch the drawer slide rail. Be careful not to let your fingers be caught when closing the drawer. 5 return the external lcf to its ...

  • Page 145: 7-17

    1 2 3 4 5 6 7 8 9 10 11 12 7-17 knob 2 1 2 lift knob (see the upper right figure), then remove any misfed paper. - for the paper misfed in the position shown on the right, pull the knob in the direction of the arrow, then remove it. Knob knob paper misfeed in the finisher (optional) 1 open the upper...

  • Page 146: 7-18

    1 2 3 4 5 6 7 8 9 10 11 12 7-18 when the graphic symbols flash on the touch panel 4. Clear paper symbol (cont.) 4 remove any misfed paper from the paper exit area. Paper misfeed in the saddle stitch unit (optional) * only when the saddle stitch finisher (da-fs815) is installed. 1 open the entrance c...

  • Page 147: 7-19

    1 2 3 4 5 6 7 8 9 10 11 12 7-19 1 2 4 turn the right-hand knob counter clockwise. Then, push the left-hand knob and turn it clockwise. 5 remove any paper misfed on the exit side of the saddle stitch unit. 6 open the exit cover of the saddle stitch unit and remove any misfed paper..

  • Page 148: 7-20

    1 2 3 4 5 6 7 8 9 10 11 12 7-20 when the graphic symbols flash on the touch panel 5. Adding staples (optional) when the staple cartridge runs out of staples, if the optional finisher is installed, the following message appears: set staple cartridge add staples to the cartridge according to the proce...

  • Page 149: 7-21

    1 2 3 4 5 6 7 8 9 10 11 12 7-21 5. Adding staples (optional) (cont.) 6 return the staple cartridge to its original position. - insert the cartridge until it is caught by the claw and fixed with a click sound. 7 close the front cover of the finisher. If the following message remains displayed, repeat...

  • Page 150: 7-22

    1 2 3 4 5 6 7 8 9 10 11 12 7-22 when the graphic symbols flash on the touch panel 3 pull out the grip of the saddle staple holder toward you and turn it 90 o clockwise in the direction of the arrow. 4 remove the empty staple case and set a new one. - replace both staple cases with new ones. - do not...

  • Page 151: 7-23

    1 2 3 4 5 6 7 8 9 10 11 12 7-23 7 close the lower cover of the finisher. Test stapling is then automatically performed on a blank sheet. - this operation is carried out to avoid blank stitching. If test stapling fails to be performed and the following message remains displayed, repeat the above proc...

  • Page 152: 7-24

    1 2 3 4 5 6 7 8 9 10 11 12 7-24 when the graphic symbols flash on the touch panel when copies have not been stapled in the staple mode, the following message may be shown on the display: examine stapler this means that staples have become jammed. Remove them as described below. Finisher 6. Removing ...

  • Page 153: 7-25

    1 2 3 4 5 6 7 8 9 10 11 12 7-25 5 return the staple case to its original position. - insert the cartridge until it is caught by the claw and fixed with a click sound. Saddle stitch unit 6 close the front cover of the finisher. 2 remove the empty staple case. 3 while pushing down on level , pull up k...

  • Page 154: 7-26

    1 2 3 4 5 6 7 8 9 10 11 12 7-26 when the graphic symbols flash on the touch panel 5 return the staple case to its original position. 6. Removing jammed staples (optional) (cont.) jammed staples stapler 4 remove any jammed staples, and then return knob to its original position..

  • Page 155: 7-27

    1 2 3 4 5 6 7 8 9 10 11 12 7-27 7. Disposing of accumulated punched paper bits (optional) when paper bits punched from copies have accumulated to a certain level, the following message appears. Please dispose of hole punch dust dispose of the paper bits as described below. 1 open the cover of the ho...

  • Page 156: 7-28

    1 2 3 4 5 6 7 8 9 10 11 12 7-28 when the graphic symbols flash on the touch panel when the call service or clear paper symbol is flashing, if you press the clear key and the digital key 8 together before you turn off the power, the corresponding error code will appear on the copy quantity display on...

  • Page 157: 8-1

    1 2 3 4 5 6 7 8 9 10 11 12 8-1 8. Maintenance 1. Daily inspection ................................................................ 8-2 2. Simple troubleshooting ............................................... 8-3 08̲maintenance.P65 04/09/02, 16:53 1.

  • Page 158: 8-2

    1 2 3 4 5 6 7 8 9 10 11 12 8-2 maintenance scanning area 1. Daily inspection items for daily check power switch on/off status we recommend turning the power switch on at the startup everyday so that copies can be made whenever you want. Also, be sure to turn the power switch off when you leave the o...

  • Page 159: 8-3

    1 2 3 4 5 6 7 8 9 10 11 12 8-3 press the start or energy saver key on the control panel to clear the automatic energy saving mode. (it takes a while for the machine to become ready.) press start key to return the power ‘on’ . Key in the correct department code. * if the department code is not clear,...

  • Page 160: 8-4

    1 2 3 4 5 6 7 8 9 10 11 12 8-4 maintenance is the reversing automatic document feeder firmly closed? Is the original cover or the transport belt of the reversing automatic document feeder dirty? Is the scanning area dirty? Is the copy density set properly? Reference page page 7-3 select the same siz...

  • Page 161: 9-1

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 9. Specifications & options 1. Dp-6530/8130 specifications ........................................... 9-2 2. Specifications of options ............................................ 9-4 3. Packing list .......................................................................

  • Page 162: 9-2

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 specifications & options 1. Dp-6530/8130 specifications model name type original glass copying system developing system fixing method photoconductor type original scanning system resolution acceptable originals acceptable original size *1 acceptable original paper weig...

  • Page 163: 9-3

    1 2 3 4 5 6 7 8 9 10 11 12 9-3 feeder drawer/tandem lcf bypass drawer bypass drawer bypass drawer bypass *2 drawer/tandem lcf bypass drawer bypass drawer bypass drawer bypass *2 drawer/tandem lcf bypass drawer bypass drawer bypass drawer bypass *2 paper size lt (letter), st-r (invoice-r) lt-r (lette...

  • Page 164: 9-4

    1 2 3 4 5 6 7 8 9 10 11 12 9-4 specifications & options 2 x 9.8 (2000) 5.5 (1000) mixed paper not loaded 1, 2 x whichever of 4.3”, 750 sheets or 100 copies is reached first whichever of 2.9”, 500 sheets or 50 copies is reached first 1 2.9 * (500) 9.8 (2000) 5.5 (1000) 2 2.9 * (500) 9.8 (2000) 5.5 (1...

  • Page 165: 9-5

    1 2 3 4 5 6 7 8 9 10 11 12 9-5 model name da-sp81 hole punch unit available paper sizes 2 holes: lg (legal), lt-r (letter-r) 3 holes: ld (ledger), lt (letter) paper weight: 16 lb bond - 140 lb index number of punching holes and hole diameter 2 / 3 holes switchable (0.315” dia.) * the paper mentioned...

  • Page 166: 9-6

    1 2 3 4 5 6 7 8 9 10 11 12 9-6 specifications & options 3. Packing list packing list set-up instructions set-up report photoconductive drum photoconductive drum cover operating instructions pocket tray spacer of reversing automatic document feeder back guide for tab paper 09̲specifications.P65 04/09...

  • Page 167: 9-7

    1 2 3 4 5 6 7 8 9 10 11 12 9-7 4. Index numbers 2 in 1 ............................................................. 4-12 2 in 1 duplex .............................................. 4-12 2 in 1/4 in 1 ................................................... 4-12 4 in 1 .....................................

  • Page 168: 9-8

    1 2 3 4 5 6 7 8 9 10 11 12 9-8 specifications & options 4. Index (cont.) duplex copying ................................................ 3-7 e edge erase ...................................................... 4-4 energey saver ...................................................... 1 energy saver key...

  • Page 169: 9-9

    1 2 3 4 5 6 7 8 9 10 11 12 9-9 power switch .................................................... 1-2 precautions .......................................................... 9 precautions for using the reversing automatic document feeder .......................................... 2-11 print out depart...

  • Page 170: Memo

    Memo.

  • Page 172

    Usa only warranty panasonic digital document company makes no warranties, guarantees or representations, expressed or implied, to customer with respect to this panasonic machine, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose. Panasonic digi...