- DL manuals
- Panasonic
- All in One Printer
- DP-MB500 series
- Operating Instructions Manual
Panasonic DP-MB500 series Operating Instructions Manual - Feature Highlights
Feature Highlights
List of available features and equipment
The following features and equipment may not be available for your unit. For explanations with a (
) mark, see
the following table to determine whether your unit has a particular feature or piece of equipment.
Feature/equipment
DP-MB536
DP-MB537
DP-MB545
Broadcast transmission
Caller ID
LAN
Wireless LAN
Automatic document feeder
Multi-purpose tray
2-line LCD
—
—
Touch panel
—
One-touch dial (station keys/
broadcast keys)
—
—
PCL
PS
—
—
Lower input tray 1
Lower input tray 2
—
—
*1
TEL/FAX mode is not available for AG and TW models.
*2
Caller ID feature is not available for EU models.
*3
Distinctive ring feature is not available for EU, JT and RU models.
Feature Highlights
Operating Instructions
11
Summary of DP-MB500 series
Page 1
Dp-mb500 series operating instructions multi-function printer • do not connect the unit to a computer with the usb cable until prompted to do so during the setup of multi-function station (cd-rom). Location selection (fax supported models only) ( ): if your unit has feature #114, you can change the ...
Page 2
Thank you for purchasing a panasonic product. Object models of this manual: suffix model no. Ag dp-mb536ag dp-mb545ag cx dp-mb536cx dp-mb545cx eu dp-mb537eu dp-mb545eu jt dp-mb537jt dp-mb545jt ru dp-mb536ru dp-mb545ru sx dp-mb536sx dp-mb545sx tw dp-mb536tw • part of the model number will be omitted ...
Page 3
• avery is a trademark of avery dennison corporation. • mac, os x and bonjour are trademarks of apple inc., registered in the u.S. And other countries. Airprint and the airprint logo are trademarks of apple inc. • google, google cloud print, google play and android are trademarks or registered trade...
Page 4
End user licence agreement 1. Software “software” means the computer programs contained in the package, together with all codes, techniques, software tools, format, design, concepts, methods and ideas associated with the computer programs and all documentation related thereto. 2. Ownership panasonic...
Page 5
8. Termination you may terminate your licence at any time by destroying the software and all your copies of it or as otherwise described in these terms. Panasonic may terminate this agreement and your licence if you fail to comply with these terms. Upon such termination, you agree to terminate all u...
Page 6: Important Information
Important information for your safety (emergency processing method) laser radiation class 1 laser product • the printer of this unit utilises a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser diode...
Page 7: For Best Performance
Recording paper exit rollers and fuser unit • during or immediately after printing, near the recording paper exit roller shaft ( ) and fuser unit ( ) gets hot. This is normal. Do not touch it. A b for best performance toner cartridge and drum cartridge • when replacing the toner cartridge or drum ca...
Page 8
A b – do not place the drum cartridge near dust or dirt, or in a high humidity area. – do not expose the drum cartridge to direct sunlight. • to extend the life of the drum cartridge, the power should never be turned off immediately after printing. Leave the power turned on for a minimum of 30 minut...
Page 9: Moving The Unit
A a routine care • wipe the outer surface of the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. Moving the unit the unit is heavy. It is highly recommended that two people handle this unit. When moving the unit, hold both of the side grips ( ). A a important information...
Page 10
Do not try to move the unit alone. Important • do not carry the lower input tray and the unit together. • ensure the unit is stable when moving it, serious damage and/or injury may result from the unit falling. Important information 10 operating instructions.
Page 11: Feature Highlights
Feature highlights list of available features and equipment the following features and equipment may not be available for your unit. For explanations with a ( ) mark, see the following table to determine whether your unit has a particular feature or piece of equipment. Feature/equipment dp-mb536 dp-...
Page 12
Feature highlights when using a computer connecting the unit to a computer and a network allows you to use convenient features for scanning and fax sending/receiving. Lan usb ■scan features push scan scan to a computer you can scan the document from unit and then send it to a computer. For details a...
Page 13
Pull scan scanning from a computer you can scan the document from a computer (pull scan). For details about this feature, see "6.3 scanning from a computer (pull scan)" on page 84. ■fax features ( ) sending faxes pc fax sending you can send an electronic document as a fax message from your computer....
Page 14
Receiving faxes fax to email address (lan supported models only) ( ) you can automatically transfer a received fax document (fax to email feature) to one or more email addresses. For details about this feature, see "8.7.4 transferring faxes to email address (lan supported models only) " on page 118....
Page 15: Table of Contents
Table of contents 1 introduction ........................................................................................... 19 1.1 checking the supplied accessories ................................................................................................ 19 1.1.1 accessory information .........
Page 16
4.3 registering items in the address book through a web browser (lan supported models only) ...................................................................................................................................................... 66 5 printing ..............................................
Page 17
8.6.6 junk fax prohibitor ......................................................................................................................... 113 8.7 advanced fax feature .................................................................................................................... 116 8....
Page 18
12.1 recording paper jam ...................................................................................................................... 167 12.1.1 when the recording paper has jammed inside the rear cover ...................................................... 167 12.1.2 when the recording pa...
Page 19: 1 Introduction
1 introduction 1.1 checking the supplied accessories drum cartridge (pre-installed inside the unit) (starter toner included *1 ) power cord *2 cd-rom (including driver for printer etc.) handset *3 quick installation guide handset cord *3 important information guide drum cleaner (pre-installed inside...
Page 20: 1.2 Overview
1.2 overview 1.2.1 front view g i h e c b a l o j k f d n m parts power switch document cover output tray adf (automatic document feeder) cover document entrance document guides document tray document sub tray document exit multi-purpose tray recording paper guides standard input tray inner cover re...
Page 21
1.2.2 rear view a b c d e f g h i parts speaker handset connection jack *1 external telephone line jack led usb interface connector lan interface connector • 10 base-t/100 base-tx/1000 base-t rear cover telephone line jack power inlet *1 only for models that include a handset unit. See page 19 if yo...
Page 22
1.3 operation panel descriptions 1.3.1 button descriptions ■ dp-mb537/dp-mb545 a b c f h e g d buttons descriptions /fax auto answer *1 to turn the auto answer setting on/off. (back) to return to the previous screen. /stop to stop an operation or programming session. To erase a character/number. To ...
Page 23
Buttons descriptions /quality to select the contrast and resolution when copying. /quality *1 to select the contrast and resolution when sending a fax. /page layout to make copies using various page layouts. /e-mail *1 to send or receive the internet fax. /menu to start or exit programming. /quick j...
Page 24
Buttons descriptions navigator key to adjust the following volume *1 : – ringer volume (while setting the operation mode to fax mode) – monitor volume (while using the monitor) – handset volume (while using the handset) *3 (collate) to make a collate copy. (address book) *1 to search for a stored it...
Page 25
Display descriptions amount of toner remaining. /quick job to use quick-job features. /menu to start programming. Wireless to start wireless lan setting. To check the status of the wireless lan connection. Eco to turn the ecology mode setting on/off. 1.3.2 touch panel descriptions ( ) operating inst...
Page 26: 2 Installation and
2 installation and preparation 2.1 drum cartridge the supplied drum cartridge includes starter toner (toner cartridge is not supplied). • when using the unit for the first time, please use the supplied drum cartridge. Caution • read the instructions before you begin installation. • do not drop the d...
Page 27
A a 6. Remove the protective sheet ( ) from the drum cartridge. • do not touch or scratch the drum surface. A 7. Shake the drum cartridge horizontally more than 5 times. 8. Hold the drum cartridge ( ) with both hands, then insert firmly to lock into place. A 9. Close the inner cover. 10. Close the f...
Page 28: 2.2 Connections
Note • to ensure that the unit operates properly, we recommend the use of panasonic toner cartridge and drum cartridge . See page 19 for accessory information. Toner save feature if you want to reduce toner consumption, set the toner save setting to on (feature #482). The toner cartridge will last a...
Page 29
Note • after connecting the cables, open the rear cover and re-attach the connector-panel cover to the original position, and then close the rear cover firmly. Caution • never install telephone wiring during a lightning storm (fax supported models only). ( ) • when you operate this product, the powe...
Page 30: Supported Models Only)
For germany and austria only: connector pinouts (fax supported models only) ( ) socket "to phone line" 2 5 4 3 1 a2 2 — 3 la 4 lb 5 — 6 b2 6 1 connecting the handset see page 19 if your unit includes a handset. Important • before installing or removing the handset unit, be sure to turn the power swi...
Page 31: 2.6 Wireless Lan Settings
Protocol) address, subnet mask, and default gateway to the unit. 1. After connecting the lan cable to the unit and the computer, turn the power switch on. • the ip address, subnet mask, and default gateway will be set automatically. 2. Install multi-function station on the computer that you want to ...
Page 32: 2.7 Required Computer
• if the unit enters standby mode during the process, repeat from step 1 (the pin code will be renewed). *1 for 2-line lcd models only. ( ) 2.6.3 wps incompatible access point important • make sure the lan mode setting is set to "wireless" beforehand (feature #580). • the following setting informati...
Page 33: Printer, Scanner and Other
2.8 installing software (including printer, scanner and other drivers) panasonic multi-function station software enables the unit to carry out the following functions: – printing on plain paper, thin and thick paper, transparencies, labels, envelope and japan postcard – displaying the preview of the...
Page 34
Important notice when installing using a usb cable connection, a message may appear during the software installation. This is normal and the software will not cause any difficulties with your operating system. You can continue the installation with no problem. This kind of message is displayed: • fo...
Page 35
To modify the software (to add or uninstall each component) you can select the components to install or uninstall anytime after the installation. 1. Start windows and insert the supplied cd-rom into your cd-rom drive. 2. [ modify ] [ modify utilities ]. Then follow the on-screen instructions. To uni...
Page 36: 3 Basic Operations
3 basic operations 3.1 operating the unit's panel 3.1.1 selecting the operation mode for touch panel models you can select the desired mode by tapping one of the following buttons: copy fax scan print quick job – /copy : select this mode when using the unit as a copier. – /fax : select this mode whe...
Page 37
– paper with foreign objects attached, such as tabs or staples – paper that has dust, lint or oil stains – paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200 ℃ , such as vellum paper. These materials may transfer onto the fusing roller and cause damage. – moist paper ...
Page 38
A 2. Pinch the right recording paper guide ( ), then slide it to outside (the left recording paper guide will move by itself). Pinch the centre of the recording paper guide ( ), then slide it to match the paper size mark. A b 3. Before loading a stack of paper, fan the paper to prevent paper jams. 4...
Page 39
A b • if necessary, slide the recording paper guides to adjust the width to the size of the recording paper. Note • if the centre of the recording paper guide is pinched too much, it could cause a paper feeding error. • make sure that the recording paper is under the paper limit mark ( ), and the pa...
Page 40
• if the standard input tray does not close, the plate in the standard input tray may not be in the locked position. Push the paper down and make sure that the paper is laying flat in the standard input tray. • when setting only a few sheets of recording paper, we recommend using the multi-purpose t...
Page 41: Approx. 4.5 Kg
– for models other than ag/sx: approximately 4.5 kg – for ag/sx models: approximately 5.2 kg approx. 4.5 kg approx. 5.2 kg 3.2.2 multi-purpose tray • to set the recording paper size and type: – paper size (feature #381) – paper type (feature #384) • to print from the multi-purpose tray, change the p...
Page 42
2. Lift up the cover over the guides ( ) until it clicks into place. A 3. Load the paper with print-side up, then adjust the width of the guides ( ) to the size of the recording paper. A important • make sure the recording paper is below the paper limit mark ( ), and that it is below the upper paper...
Page 43: 3.3 Setting Documents
A note • if the paper is not inserted correctly, re-adjust the paper, or the paper may jam. 3.2.3 output tray you can temporarily expand the output tray before printing. 3.3 setting documents 3.3.1 using the scanner glass a b 1. Open the document cover ( ). 2. Place the document face down on the sca...
Page 44
• to make a portrait copy, set the original in portrait direction. To make a landscape copy, set the original in landscape direction. 3. Close the document cover. Note • confirm that there are no documents in the automatic document feeder. ( ) • place the original onto the scanner glass gently. To a...
Page 45
• when feeding certain types of document (for example, if back of the page is not clean) through the automatic document feeder, it is possible that dirty marks may be left on the original document. To prevent this, we recommend feeding the document one page at a time when using the automatic documen...
Page 46: 3.4 Multi-Function Station
3.4 multi-function station to start multi-function station, see the following. [ start ] [ all programs ] [ panasonic ] the unit's name [ multi-function station ] [application] [ scan ] (page 84) • to scan and display the scanned images. • to scan and create an image file. • to scan and send by emai...
Page 47
[ settings ] (page 47) • to change the general settings. • to change the settings for scanning. [help] • for detailed instructions on multi-function station. • to view operating instructions. • to display support web page. • to display information about multi-function station. Note • you can confirm...
Page 48
1. [ control panel ] [ internet options ] [ programs ] [ set programs ] [ set program access and computer defaults ] • if the [ user account control ] dialogue box appears, click [ continue ]. 2. [ custom ] 3. Select the desired mapi-compliant email software such as [ windows mail ], etc. From [ cho...
Page 49
3.5 programming the unit from the operation panel important • for feature availability and selection information for your unit, print the "setup list" (page 133). Features listed are available for your unit. Programming features are as follows: – "3.6 programming features: basic" (page 49) – "5.4 pr...
Page 50
Feature code description default key dialling mode #120 if you cannot dial, change this setting according to your telephone line service. – recall/flash time #121 the recall/flash time depends on your telephone exchange or host pbx. Note • if the unit is connected via a pbx, pbx functions (transferr...
Page 51
Feature code description default key set all features to default #159 before you dispose of, transfer or return the product, activate this feature to reset all programmable features and to delete all data stored in memory. • the following items will be deleted. – address book – caller information ( ...
Page 52
Feature code description default key time adjustment #226 using this feature, the unit's date and time setting will be automatically adjusted when caller information is received. Note • if the time has not previously been set, caller id will not adjust the clock. • if the time is not adjusted correc...
Page 53
Feature code description default key paper size in the lower input tray 1 #382 to set the recording paper size in the lower input tray 1. Note • if the custom size (feature #391 or #392) has not been set, custom size item will not be displayed. • this feature will be displayed only when the lower in...
Page 54
Feature code description default key paper size in the lower input tray 2 #389 to set the recording paper size in the lower input tray 2. Note • if the custom size (feature #391 or #392) has not been set, custom size item will not be displayed. • this feature will be displayed only when the lower in...
Page 55
Feature code description default key left margin setting for input tray #394 to set the left margin for input tray. 1. /menu 3 9 4 2. Select the desired input tray. Ok/set *1 3. Change the setting. : ok/set / : " ok " 4. : ok/set / : " ok " • the unit will print the test page. 5. If necessary, repea...
Page 56: Only)
Feature code description default key toner save #482 to set the toner save feature. When this feature is activated, the toner cartridge will last longer. Note • this feature may lower the print quality by reducing toner consumption. • this setting is valid for copying, and when the unit prints repor...
Page 57: 3.8 Status of The Unit
3.8 status of the unit 3.8.1 using remote control you can easily operate the following functions from your computer. – programming the features (page 49) – storing, editing or erasing items in the address book (page 62) *1 – storing or erasing items for broadcast transmission (page 64) *2 – viewing ...
Page 58
2. Select a category from the menu. [ status ] : toner and paper information, etc. [ information ] : current status of the unit and network information, etc. 3. Confirm the status of the unit. Note • you can update the status of the unit by clicking [ reload ]. 3.8.3 using the web browser (lan conne...
Page 59
4 telephone number and email address 4.1 character entry (fax or lan supported models only) for 2-line lcd models ( ): the dial keypad is used to enter characters and numbers. – press or to move the cursor. – press the dial keys to enter characters and numbers. – press /stop to erase the character o...
Page 60
For eu (german/italian) 2 3 4 5 6 7 8 9 a c 2 b Ä À d e f 3 È g h i 4 Ì j k l 5 m n o 6 Ò Ö p q r s 7 t u 8 v Ù Ü w x y z 9 a b c 2 à ä d e f 3 è g h i 4 ì j k l 5 m n o 6 ò ö p q r s 7 ß t u v 8 ù ü w x y z 9 for eu (greek) 2 3 4 5 6 7 8 9 for eu (polish) 2 3 4 5 6 7 8 9 a Ą b c Ć 2 d e Ę f 3 g h i...
Page 61
To delete a character. *1 several types of symbols cannot be entered for certain features. *2 the characters will vary depending on suffix and/or language selection (feature #110). Note • you can use the dial keypad to enter the number for certain features. To search for a name by initial example: "...
Page 62
4.2 storing telephone number and email address from your unit (fax or lan supported models only) 4.2.1 touch panel screens for address book and broadcast memory copy fax scan print quick job menu wireless eco quick job b a s i c f e a t u r e p c p r i n t f e a t u r e l a n f e a t u r e a d d r e...
Page 63
– " email fax " : to use the email address for internet fax. – " direct smtp " : to use the email address for direct smtp. 5. " ok " *1 up to 32 digits can be entered (fax supported models only). ( ) *2 up to 63 digits can be entered (lan supported models only). ( ) 4.2.3 storing telephone numbers a...
Page 64
For touch panel models ( ): 1. Display " address book " screen (page 62). 2. Select the desired item. 3. Edit the name if necessary. 4. Edit the telephone number *1 and/or email address *2 if necessary. 5. Change the email mode if necessary. – " scan " : to use the email address for scan features. –...
Page 65
• select fax or email fax. Ok/set . To use the broadcast memory for internet fax, select email fax. 3. Select the desired broadcast key. 4. Program items. Using station 1-3: press the desired station key. Using station 4-6: press /lower , then press the desired station key. • the number in brackets ...
Page 66: (Lan Supported Models Only)
4.3 registering items in the address book through a web browser (lan supported models only) you can register, edit or erase items in the address book, etc., in [ directory ] menu. Feature selection registering and editing email address and telephone number in the address book register email address ...
Page 67
Feature selection registering and editing email address and telephone number in the one-touch dial ( ) register email address and telephone number. These items can be used as destinations for the following features. Make sure that address book editing on web (feature #567) is set to " enabled " befo...
Page 68: 5 Printing
5 printing 5.1 printing from windows applications you can print a file created in a windows application. For example, to print from wordpad, proceed as follows: 1. Open the document you want to print. 2. Select [ print ] from the menu. 3. Select the unit's name as the active printer. • when mode res...
Page 69
Recording paper type media type japan postcard [ japanese postcard ] *2 *1 select [ envelope #10 ], [ envelope dl ], [ japanese envelope you #4 ], [ japanese envelope chou #3 ] or [ japanese envelope chou #4 ] for the paper size. To print on an envelope clearly, set the top, bottom, left, and right ...
Page 70
• please refer to page 187 for information on recording paper. • use the multi-purpose tray to print on special media. • to load paper, see page 41. To print on labels use labels designed for laser printing. We recommend the following: avery™ 5163/l7160 • make sure the print side is face up when loa...
Page 71
Note • wrinkles and waving may occur in some cases, even if high quality envelopes are used. • avoid printing in high humidity. High humidity may cause the envelope to curl or seal the envelope. • store envelopes away from moisture and humidity, where they can lay flat and their edges will not be be...
Page 72
Clasp transparent window to print on japan postcards • use the standard japan postcards. • do not use japan postcards for ink-jet printers. • when you load japan postcards on the tray, make sure to check where the places of stamp and post code they are on the postcards. For details about the number ...
Page 73: 5.2 Easy Print Utility
5.2 easy print utility by printing using the panasonic easy print utility instead of the printer driver, you will have access to many useful and convenient printing features: – preventing unnecessary prints by checking the preview on pc screen – combining multiple documents – saving a file in pdf fo...
Page 74
Note • the maximum number of documents that can be displayed in the [ print page operation ] window is 999 pages. Saving a file as pdf file you can save the previewed files in pdf format instead of printing it. 1. Perform steps 1 to 4 on “5.2 easy print utility”. 2. Click the [ save pdf file ] icon ...
Page 75
Note • the following types of file formats can be printed: – tiff – jpeg – pdf (image type only, such as files scanned from the unit or files scanned from the computer using quick image navigator.) • up to 8 characters are displayed for the file name. • for details about the usb memory device, see p...
Page 76
To select the page layout ( "n in 1 type" ) you can save paper by printing 2, 4 or 8 pages onto 1 page. The documents’ size will be reduced to fit the recording paper. You can also change the default setting (feature #662). 1. Select the desired setting. 2. Ok/set *1 *1 for 2-line lcd models only. (...
Page 77
5.4 programming features: pc print to change the feature settings, see page 49 for details. Feature code description default key input tray in pcl #760 to set the input tray in pcl. Note • following options are displayed only when the paper size and the media type match. If either is changed, this s...
Page 78
Feature code description default key font number in pcl #769 to set the font number to be used in pcl printing. The unit assigns a number to each font. Enter the font number from " 000 " to " 056 " , using the dial keypad. • the default setting is " 000 " . Note • if the font source in pcl (feature ...
Page 79
Feature code description default key number of copies in usb print #660 to set the number of copies to print. Enter the desired number of copies from " 01 " to " 99 " , using the dial keypad. See page 75 for details. Note • the default setting is " 01 " . – recording paper orientation in usb print #...
Page 80: 6 Scanning
6 scanning 6.1 touch panel screens for scanning copy fax scan print quick job pc email address ftp server smb folder usb memory 6.2 scanning from the unit (push scan) you can easily scan a document by using the operation panel on the unit. You can select one of the following scanning modes depending...
Page 81
3. For 2-line lcd models: 1. Select a scanning mode. Ok/set 2. Select a destination. Ok/set for touch panel models: 1. Select the destination and scanning mode if necessary. Note • when scanning to email address , you can enter the destination email address – see page 59 for character entry. – press...
Page 82
" email address " *3*4 ― " ftp server " *3*4 ― " smb folder " *3*4 ― " usb memory " *3*5 ― *1 a password-protected pdf can also be selected as a file format. *2 when scanning several pages and saving as a single file, select tiff or pdf as the file format. *3 when scanning several pages and saving a...
Page 83
5. Click [ edit ] next to [ ftp server ]. 6. Click [ edit ] next to the desired ftp server. 7. Enter the server name, ip address, folder path, etc. [ submit ] 8. Close the web browser. Note • if you do not enter a folder path in step 7, the scanned image will be saved in the root folder. Setting the...
Page 84
6.3 scanning from a computer (pull scan) note • when scanning a document, we recommend using the scanner glass rather than the automatic document feeder for better results. ( ) • do not open the document cover when scanning a document with the automatic document feeder. ( ) 6.3.1 using multi-functio...
Page 85
• you can save images in tiff, jpeg, png, bmp or pdf formats. To change the format, click [ file ] [ environment setup ], and then change the settings in [ twain ] tab. • if the [ select ] button is displayed in [ target device ], click [ select ] to select the unit from the list, and then click [ o...
Page 86: 7 Copying
7 copying 7.1 touch panel screen transition for copying copy fax scan print quick job quality copy size duplex page layout settings 3: text/photo a4>#1:a4-r off off 100% 01 zoom copy number 7.2 making a copy 7.2.1 basic procedures for making a copy 1. Make sure that the unit is set to the copy mode....
Page 87
– poster feature (page 94) – n in 1 feature (page 95) – separate n in 1 feature (page 96) – booklet feature (page 97) – edge feature (page 98) – margin feature (page 99) 7.2.2 various settings for making copies to select the copy size for 2-line lcd models ( ): 1. /copy /copy size (repeatedly): " or...
Page 88
– " photo " : for photographs, shaded drawings, etc. – " high-res " (scanner glass only): for small text, drawing with fine lines, etc. *1 for 2-line lcd models only. ( ) note • you can hold the default resolution (feature #461). 7.2.2 various settings for making copies 88 operating instructions.
Page 89: 7.3 More Copying Features
7.3 more copying features important • make sure that the unit is set to the copy mode. 7.3.1 zoom copy (enlargement / reduction) document setting enlarged copy (150 %) reduced copy (70 %) scanner glass ( ) original document enlarged copy original document reduced copy a a automatic document feeder (...
Page 90
7.3.2 duplex feature duplex type binding/originals type document setting 1-sided originals to 2-sided copies " long edge " " short edge " scanner glass or automatic document feeder ( ) 2-sided originals to 1-sided copies " long edge " " short edge " automatic document feeder ( ) 2-sided originals to...
Page 91
7.3.3 collate copy the unit can collate multiple copies in the same order as the original document pages. Example: making 2 copies of a 4-page original document collated pages uncollated pages 4 3 2 1 4 3 2 1 4 4 3 3 2 2 1 1 1. Set the original. 2. : /copy : " collate " : display " settings " screen...
Page 92
7.3.4 quick id copy feature/image repeat feature (scanner glass only) quick id copy feature: to copy 2-sided documents onto one page. Quick id copy "2 in 1" "4 in 1" "8 in 1" original document page layout ( " landscape " ) page layout ( " portrait " ) 1. Set the original. 2. : /copy /page layout (re...
Page 93
Image repeat feature: to copy a single document repeatedly onto one page. Image repeat "2 in 1" "4 in 1" "8 in 1" original document page layout 1. Set the original. 2. : /copy /page layout (repeatedly): " page layout " : display " page layout " screen (page 86). 3. Select " image repeat " ok/set *1 ...
Page 94
7.3.5 poster feature (scanner glass only) you can make copies divided into 2, 4 or 9 sections to make enlarged copies of the individual sections. You can then glue them together to make a poster. Original document "1 x 2" "2 x 2" "3 x 3" 1. Set the original. 2. : /copy /page layout (repeatedly): " p...
Page 95
7.3.6 n in 1 feature you can save paper by copying 2, 4 or 8 pages onto one page. The documents will be reduced to fit the recording paper. N in 1 "2 in 1" "4 in 1" "8 in 1" original document page layout ( " landscape " ) page layout ( " portrait " ) 1. Set the original. 2. : /copy /page layout (rep...
Page 96
7.3.7 separate n in 1 feature (scanner glass only) you can separate an n in 1 copied document back into its original, separate pages. This feature is available for documents created using the 2 in 1 and 4 in 1 settings. Separate n in 1 "2 in 1" "4 in 1" original document ( " landscape " ) original d...
Page 97
7.3.8 booklet feature you can make copies, and then fold them in half to create booklets. The documents will be reduced to fit the recording paper. 8 7 6 5 4 3 2 1 1, 2 3, 4 5, 6 7, 8 1. Set the original. 2. : /copy /page layout (repeatedly): " page layout " : display " page layout " screen (page 86...
Page 98
7.3.9 edge feature you can set the unit not to copy the outer edges of the document without reducing the copied documents to fit the recording paper. This is useful for copying documents with register marks or dirty edges. 1. Set the original. 2. For 2-line lcd models ( ): 1. /copy /page layout (rep...
Page 99
7.3.10 margin feature you can set the unit not to copy a particular edge of the document to make a margin. This is useful for binding the copied documents. 1. Set the original. 2. For 2-line lcd models ( ): 1. /copy /page layout (repeatedly): " margin " 2. Select " on " . Ok/set 3. Select the desire...
Page 100
7.3.11 sorting copies by rotation you can sort output into sets of documents (collated) or into sets of pages (uncollated). Important • make sure of the following when setting recording paper into trays: – recording paper should set in portrait orientation for one paper tray, and in landscape orient...
Page 101
6. Rotate the document 180 degrees to scan the bottom half. • make sure to align the document with the corner where the mark is located. 7. : ok/set / : " ok " • start scanning the bottom half and then, start copying. Note • the images or characters at the combined area may become unclear or shift i...
Page 102
Document result solution 1. /menu 4 5 3 ok/set *1 2. Increase the setting value to adjust the image position in the direction of the arrows. 3. : ok/set / : " ok " *1 for 2-line lcd models only ( ) 1. /menu 4 5 3 ok/set *1 2. Decrease the setting value to adjust the image position in the direction o...
Page 103
7.4 programming features: copy to change the feature settings, see page 49 for details. Feature code description default key input tray setting for copy #460 to set the input tray to use for copy. Note • following options are displayed only when the paper size and the media type match. If either is ...
Page 104
Feature code description default key frame margin #474 to set the frame margin. When this feature is activated, your copies will be automatically reduced according to the margin setting. However, if you change the zoom rate (page 89), your copies will not be automatically reduced. 0 margin hold #475...
Page 105: 8 Fax
8 fax 8.1 availability of the fax feature important • the fax feature may not be available for your unit. See “ list of available features and equipment” on page 11 whether your unit has the feature. 8.2 preparation for sending a fax we recommend programming the following so that they appear on the ...
Page 106
8.4.1 various settings for sending faxes to select the contrast adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available. 1. : /fax /quality (repeatedly): " contrast " : display " contrast " screen (page 105). 2. Change the contrast. : ok/set /...
Page 107
1. Set the original during fax reception or fax memory transmission. 2. Enter the fax number using the dial keypad or address book. 3. /start when using the scanner glass, scan the 1st page. : to scan the next page, place the document and press ok/set . Repeat this until all the documents are scanne...
Page 108
Situation mode setup use only as a fax you have a separate telephone line just for faxes, or you want to use the unit only for receiving faxes. Fax only 1. /fax auto answer (repeatedly): " fax only mode " • the /fax auto answer light turns on. Use mostly as a telephone you want to answer calls by yo...
Page 109
8.6.2 tel mode how to receive phone calls and faxes you have to answer all calls manually. To receive a fax document, press /start and then : 2 / : " receive " . For ag/cx/eu *1 /jt/sx/tw models: • if you do not answer the call within 10 rings, the unit will temporarily switch to fax reception. The ...
Page 110
Note • if you do not answer the call, the unit will activate the fax function. – some fax machines do not generate fax calling tones when sending faxes, therefore the unit will try to receive a fax even if no fax calling tone is detected. 8.6.4 using the unit with an answering machine setting up the...
Page 111
1. The caller calls your unit. • the answering machine will answer the call. 2. The caller can leave a message after the greeting message. 3. The caller presses 9 (pre-selected fax activation code). • the unit will activate the fax function. 4. The caller presses the start button to send a document....
Page 112
" long distance " : the caller made a long distance call. Touch panel screens for caller id copy fax scan print quick job menu wireless eco quick job department setup print report caller search call list erase viewing/editing a caller's telephone number before calling back/storing important • if the...
Page 113
Erasing specific caller information for 2-line lcd models ( ): 1. /menu (repeatedly): " caller search " ok/set 2. Display the desired item. Ok/set /stop for touch panel models ( ): 1. Display " caller search " screen (page 112). 2. Select the desired item. " delete " 3. " yes " storing caller inform...
Page 114
Touch panel screens for junk fax prohibitor copy fax scan print quick job address book standard resolution contrast ringer volume off duplex pause flash settings email fax monitor prohibitor junk list set junk list display junk list print ok off junk fax prohibitor settings fax feature setup fax pre...
Page 115
Other useful features for junk fax prohibitor to display the junk fax prohibitor list for 2-line lcd models ( ): 1. /menu (repeatedly): " junk fax proh. " 2. (repeatedly): " junk list disp. " ok/set 3. Display the items on the list. 4. Press /stop to exit. For touch panel models ( ): 1. Display " ju...
Page 116: 8.7 Advanced Fax Feature
8.7 advanced fax feature 8.7.1 sending an electronic document as a fax message from your computer (pc fax sending) you can send an electronic document as a fax message from your computer. 1. Open the document you want to send. 2. Select [ print ] from the menu. 3. Select the pcfax unit's name as the...
Page 117
To activate this feature, set the following beforehand: 1. Activate the pc fax setting (feature #442). 1. /menu 4 4 2 2. Select " always " or " connected " . Ok/set *1 : /menu / : • see the pc fax setting (feature #442) for details about the selections. 2. Deactivate the fax preview mode (feature #4...
Page 118
To activate this feature, set the following beforehand: 1. Set the web fax preview access code. 1. /menu 4 5 0 ok/set *1 2. Enter the programming password (feature #155). : ok/set / : " ok " 3. Enter the web fax preview access code, up to 8 characters, using the english alphabet and numbers. : ok/se...
Page 119: 8.8 Internet Fax
Useful information: if you are away from the unit for a long period of time, we recommend the following. 1. Set this feature. 2. Also activate pc fax (page 116), and keep your computer turned on. • for pc fax, start multi-function station. [ application ] [ pc fax ] in this case, data will be transf...
Page 120
To activate this feature, set the following beforehand: 1. Program the email server settings for internet fax. 1. Start multi-function station. 2. [ device ] [ configuration web page ] [ network ] 3. Type “root” as the user name, then enter the password (feature #155). [ ok ] 4. Select the [ email f...
Page 121
Using the one-touch dial feature ( ) using station 1-3 press the desired station key. Using station 4-6 press /lower , then press the desired station key. 8.8.2 broadcast transmission of internet fax you can send the same document to multiple parties (up to 20). Before using this feature, register e...
Page 122
8.9 programming features: fax to change the feature settings, see page 49 for details. Feature code description default key tel/fax delayed ring count #212 if you use an extension telephone in tel/fax mode, select the desired number of times the extension telephone rings before the unit answers the ...
Page 123
Feature code description default key delayed send #412 to reserve fax transmission up to 24 hours in advance of the desired time. Set the original before activating this menu. Note • the document will be scanned into memory. The unit will then send the data at the specified time. You cannot use this...
Page 124
Feature code description default key confirming the next document #424 when this feature is activated, after the document is scanned using the automatic document feeder during fax memory transmission, the message shows to confirm the next document. Insert the next document and press : ok/set / : " o...
Page 125
Feature code description default key memory reception alert #437 to alert you with a beeping sound when a received fax document is stored into memory. Note • if documents are stored into memory due to some printing problem, the beeps will continue until you solve the problem. If a message is display...
Page 126
Feature code description default key fax receive notify #451 when this feature is activated, the computer connected to your unit using usb/lan *1 will receive a notification when a fax document is received. Note • when connecting to the lan ( ): register computers to which fax reception notification...
Page 127: 9 Network
9 network 9.1 availability of the network feature important • the network feature (lan or wireless lan) may not be available for your unit. See " list of available features and equipment" on page 11 whether your unit has the feature. 9.2 programming features: lan to change the feature settings, see ...
Page 128
Feature code description default key proxy server #531 to set the proxy server for lan connection. 1. /menu 5 3 1 2. Select " enabled " . Ok/set *1 3. Select the desired access type. Ok/set *1 4. Enter the ip address or domain name. : ok/set / : " ok " • a domain name is up to 63 characters. 5. Ente...
Page 129
Feature code description default key all ftp/smb address erase #578 to erase all ftp destinations and smb folder destinations stored in the unit. • disconnect the following cables before activating this feature. – telephone line cord – usb cable – lan cable – lan mode #580 to select lan mode. Import...
Page 130: 9.4 Network Features
Code status cause solution 113 offline ip address is not determined, because the ip address is duplicated. Change the ip address. 121 offline the unit is allocating an ip address automatically using a dhcp server. — 128 offline there is no response from the dhcp server, or dhcp server error is occur...
Page 131
Feature menu selection setting the ip filtering [ lan feature ] enter the ip filtering information. 1. Select the [ lan feature ] from the menu. 2. Click [ edit ] next to [ ip filtering ]. 3. Click [ edit ] next to [ filter (ipv4) ]/[ filter (ipv6) ]. 4. Change the mode and edit ip filtering informa...
Page 132
Feature menu selection setting the email server information for fax to email address [ email feature ] enter the email server information to send fax message from the unit via an email. For details about feature, see the fax chapter. Setting the email server information for error notify [ email feat...
Page 133: 10 Other Useful Features
10 other useful features 10.1 reference lists and reports you can print out the following lists and reports for your reference. – " setup list " – " address list " – " journal report " – " broadcast list " – " printer test " – " caller id list " *1 – " pcl font list " *2 – " ps font list " *3 – " ft...
Page 134: 10.2 Firmware Update
To check the caller id list through the web browser interface (lan and caller id supported models only) ( ) important • make sure the caller id list on web is set to "enabled" beforehand (feature #568). 1. Start multi-function station. 2. [ device ] [ configuration web page ] [ device ] 3. Type “ ro...
Page 135: 10.4 Mode Restriction
Activating ecology mode : /menu (repeatedly): " eco mode on " ok/set : eco " eco " " on " customizing ecology mode each ecology mode setting can be changed. 1. : /menu (repeatedly): " eco mode on " : eco 2. Select the setting you want to change. 3. Select the desired item. 4. : ok/set / : " ok " ava...
Page 136
10.4.1 touch panel screens for mode restriction copy fax scan print quick job menu wireless eco quick job department setup print report caller search call list erase 10.4.2 setting the mode restriction activating the mode restriction 1. /menu 1 5 4 ok/set *1 2. Enter the administrator code (feature ...
Page 137
5. If necessary, change the " pc print " or " copy " setting. Select the desired setting. " ok " editing mode restriction for departments important • make sure feature #154 is set to " on " beforehand. For 2-line lcd models ( ): 1. /menu (repeatedly): " department setup " 2. Enter the administrator ...
Page 138
To set or edit the mode restriction through the web browser interface important • make sure feature #154 is set to "on" beforehand. 1. Start multi-function station. 2. [ device ] [ configuration web page ] [ device ] 3. Type " root " as the user name, then enter the password (feature #155). [ ok ] 4...
Page 139: 10.5 Quick-Job Feature
10.5 quick-job feature you can pre-program frequently used scan/copy types (up to 3 for each). The following setting items can be pre- programmed: scan copy job name job name scanning mode page layout pc selection *1 number scan type original size scan size input tray resolution zoom rate file forma...
Page 140: 10.6 Mobile Printing
10.6 mobile printing you can print contents from your smart phone or tablet device, etc. 10.6.1 mobile print (panasonic application) the application is available for ios and android™ devices. You can download "mobile print" (panasonic application) from the app store (ios) or google play™ (android). ...
Page 141: 10.7 Secure Print
For 2-line lcd models ( ): password will be displayed after pressing . • when the connection is complete, " connected " will be displayed. *1 for 2-line lcd models only. ( ) 10.7 secure print you can assign a password for printing from your computer. This feature enables you to control when the prin...
Page 142: 10.9 Usb Memory Device
5. Select [ proof print ]. • you can enter a desired job name in [ job name ], up to 15 characters. If not entered, the application itself will assign the job a name. 6. Click [ ok ]. 7. Click [ print ]. • the unit will print 1 copy of the document and stop temporarily so you can check whether it wa...
Page 143
10.10 central management controller you can manage and operate multi-function printers via the network using this system. – you can monitor the number of printed pages and error information for each multi-function printer as an administrator. – you can update firmware and driver software of multiple...
Page 144
3. Select the desired ring pattern assigned for fax. Ok/set *1 *1 for 2-line lcd models only. ( ) 10.12 lower input tray (optional) you can add a lower input tray. See page 19 for accessory information. For number of sheets the unit can load, see page 187. Important • before starting installation of...
Page 145
• when removing the input tray from the unit, be sure that there is no recording paper remaining in the unit. Paper left in the unit may cause a paper jam. Caution for the lower input tray • do not drop the lower input tray. • hold the lower input tray with both hands when removing or installing. Th...
Page 146: Approx. 4.5 Kg
– da-fap109: approximately 4.5 kg approx. 4.5 kg – da-fap110: approximately 5.2 kg approx. 5.2 kg • do not position the unit in a location where it is unstable or subject to vibrations. The unit weighs as follows when the lower input tray is installed and fully loaded with recording paper. – da-fap1...
Page 147
For windows vista: [ control panel ] [ printers ] for windows 7/windows 8/windows 10: [ control panel ] [ devices and printers ] 2. Select the unit's name. 3. Open the printer properties window. For windows xp: select [ properties ] from the [ file ] menu. For windows vista: select [ properties ] fr...
Page 148: 11 Help
11 help 11.1 report messages (fax supported models only) to indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the sending and journal reports (page 133). Message code cause & solution communication error 40-42 46-72 ff • a transmission or recepti...
Page 149: 11.2 General Messages
11.1.1 internet fax report messages (error code list) if an internet fax could not be sent or received, an error code is displayed on the journal and sending report. If you cannot solve the problem by the following instructions, consult your network administrator. Error code cause solution c0 there ...
Page 150
Display cause & solution " check paper #1 " • recording paper is not installed or the standard input tray has run out of paper. Install paper (page 37). • recording paper was not fed into the unit properly. Re-insert the recording paper (page 37). • the standard input tray is not installed or is not...
Page 151
Display cause & solution " file size over " • when performing scan to ftp server or scan to smb folder, the number of scanned pages or the file size of the scanned data has exceeded the limitation. Divide the document into sections. " inner cover open " • the inner cover is open. Close it. " keep co...
Page 152
Display cause & solution " rx memory full " • the memory is full of received documents due to a lack of recording paper or a recording paper jam. Load paper (page 36) or remove the jammed paper (page 174). • if the pc fax (feature #442) is set to " always " , – check the connection between the compu...
Page 153
Display cause & solution " usb memory write protect " • the write-protection switch of the usb memory device is in the lock position. Unlock the switch to allow writing access. • the save folder in the usb memory device is set to "read only". Using a computer, set the save folder to "writable". (for...
Page 154: 11.3 Interface Messages
11.3 interface messages display cause & solution " connect error " • ip address of the server or network configuration is incorrect. Consult your network administrator. • the server is down. Consult your network administrator. " data error " • the cable between the unit and the computer is not conne...
Page 155
11.4 when a function does not work 11.4.1 general problem cause & solution the unit does not work. • check the connections (page 28, page 33). The recording paper exit fills up quickly or the recording paper does not stack properly in the recording paper exit. • high humidity may cause the recording...
Page 156: A B C
Problem cause & solution i cannot find the unit in the [target device] or [device select] dialogue box when operating the following functions. – scanning – remote control – pc fax ( ) – device monitor • the printer driver has not been installed. Install it on your computer (page 33). I forgot the pa...
Page 157
Problem cause & solution a blank sheet is ejected. • you placed the document facing the wrong way when using the copier. • the other party placed the document in their fax machine the wrong way. Check with the other party (fax supported models only). ( ) i cannot install or uninstall the pcl printer...
Page 158
Problem cause & solution i forgot the password for the secure print feature. • you may have changed the password. If you do not remember it, run the secure print application, then delete all print jobs. Click the [ setup ] button, then enter the new password into the [ setup ] dialogue. I cannot fin...
Page 159
11.4.4 copier problem cause & solution the unit will not make a copy. • you cannot make a copy during programming. Make the copy after programming. • the document was not set properly (page 43). • recording paper is not loaded or the unit has run out of paper. Load paper (page 36). Letters on the co...
Page 160
Problem cause & solution i cannot receive the whole document (lan supported models only). ( ) • the fax to email address (feature #452) is activated. In this case, only faxes within the fax memory capacity (page 182) can be received. Deactivate the feature, then ask the other party to resend the doc...
Page 161
Problem cause & solution i cannot hear a dial tone. • the telephone line cord is connected to the [ ext ] jack on the unit. Connect to the [ line ] jack (page 28). • if you use a splitter/coupler to connect the unit, remove the splitter/coupler and connect the unit to the wall jack directly. If the ...
Page 162
Problem cause & solution i cannot print a file saved on the usb memory device. • there is no usb memory device inserted in the unit. Insert a supported usb memory device (page 142). • you tried to print different file formats onto 1 page. Activate the continuous print setting (page 76). • the file m...
Page 163
11.4.7 network (lan supported models only) problem cause & solution i cannot operate the following functions. – pc printing – scanning – remote control – pc fax ( ) – device monitor – secure print – proof print • if the led (orange) is not illuminated, confirm the lan cable is connected to the lan p...
Page 164
Problem cause & solution the [windows security alert] dialogue box appears and asks if i want to block [pccmflpd] and i cannot operate the following functions after installing the microsoft windows xp service pack 2 or later. – pc printing – scanning – remote control – pc fax ( ) – device monitor – ...
Page 165
11.4.9 using an answering machine problem cause & solution i cannot receive documents automatically. • your greeting message on the answering machine is too long. Shorten the message. Record a message less than 10 seconds long. • the answering machine rings too many times. Set to 1 or 2 rings. I can...
Page 166
To confirm the security settings (for windows 7/windows 8/windows10 users) 1. [ control panel ] [ system and security ] [ windows firewall ] [ advanced settings ] 2. [ inbound rules ] 3. Confirm that [ panasonic trap monitor service ], [ panasonic lpd manager ] and [ panasonic lpd ] are displayed an...
Page 167: 12 Paper Jams
12 paper jams 12.1 recording paper jam the display will show the following: – " paper jammed " " open rear cover " 12.1.1 when the recording paper has jammed inside the rear cover caution • do not pull out the jammed paper forcibly. 1. Hold the rear cover open lever ( ), and then pull open the rear ...
Page 168
• if paper is jammed near the rollers, see case 1 (page 168). • if paper is jammed near the fuser unit, see case 2 (page 168). • if paper is jammed near the automatic duplex unit, see case 3 (page 169). 4. Push up the green levers ( ) to the original position. A 5. Close the rear cover firmly. Case ...
Page 169
A b caution • the fuser unit ( ) gets hot. Do not touch it. Case 3: when the recording paper has jammed near the automatic duplex unit: • if the top edge of the recording paper ( ) is sticking out, remove the jammed paper carefully by pulling it toward you. A • if the bottom edge of the recording pa...
Page 170
A 2. Remove the jammed paper ( ) carefully. A • if you cannot remove the jammed paper, open the internal cover ( ), remove the paper( ), then close the internal cover. A b 3. Close the rear cover firmly. If the message indicating the paper jam is still displayed, continue to step 3 (page 170). Step ...
Page 171
A 3. Insert the multi-purpose tray into the unit. 12.1.3 when the recording paper has jammed near the lower input tray ( ) remove the jammed paper by following the procedure below. Step 1: when the recording paper has jammed inside the rear cover: 1. Hold the rear cover open lever ( ), and then pull...
Page 172
A 2. Remove the jammed paper ( ) carefully. A if the message indicating the paper jam is still displayed, continue to step 3 (page 172). 3. Insert the input tray into the unit. Note • if there is any recording paper remaining in the unit, remove it from the inside of the unit. Step 3: when the recor...
Page 173
Note • if the centre of the recording paper guide is pinched too much, it could cause a paper feeding error. • if the message is still displayed, check the recording paper specifications and load the recording paper again. See page 36 for details. • if there is any recording paper remaining in the u...
Page 174: Document Feeder)
12.2 document jams (automatic document feeder) the display will show the following: – " remove document " caution • do not pull out the jammed document forcibly before lifting the adf cover. 1. Open the adf cover ( ) while holding down the document cover ( ). A b 2. Remove the jammed document ( ) ca...
Page 175
• press /stop to clear the message. 12.2 document jams (automatic document feeder) operating instructions 175.
Page 176: 13 Cleaning
13 cleaning caution • do not use paper products, such as paper towels or tissues for cleaning. • do not use flammable aerosol cleaners. 13.1 cleaning the white plates and glass clean the white plates and glass when a black line, a white line or a dirty pattern appears on: – your recording paper, – t...
Page 177: 13.2 Cleaning The Document
13.2 cleaning the document feeder rollers clean the rollers when documents frequently misfeed, or when a line or a dirty pattern appears on documents. 1. Turn the power switch off. 2. Open the adf cover ( ) while holding the document cover ( ). A b 3. Clean the document feeder rollers ( ) and the pa...
Page 178: Purpose Tray
13.3 cleaning the recording paper feeder rollers of the multi- purpose tray clean the recording paper feeder rollers when documents fed from the multi-purpose tray frequently misfeed. 1. Turn the power switch off. 2. Open the front cover by holding the indentation. 3. Lift up the cover over the guid...
Page 179
13.4 cleaning the pickup rollers clean the pickup rollers when documents fed from the standard input tray frequently misfeed. 1. Turn the power switch off. 2. Pull the standard input tray ( ) until it clicks into place, then pull it completely out, lifting the front part of the tray. A 3. Clean the ...
Page 180
13.5 cleaning the drum cartridge important • if the groove of the drum cartridge is dirty, lines or dirty patterns may appear on printed sheets. Be sure to remove any toner remaining on the inside of the drum cartridge to maintain the print quality. • the cleaner for the drum cartridge is pre- insta...
Page 181: 14 General Information
14 general information 14.1 specifications item specifications printer type laser printer memory capacity (for operation and storing memory) dp-mb536 512 mb dp-mb537 768 mb dp-mb545 1024 mb power supply ag/cx/ru/sx models: 220-240 v ac, 50/60 hz eu/jt models: 220-240 v ac, 50 hz tw models: 110 v ac,...
Page 182
Item specifications scanning resolution up to 1,200 × 1,200 dpi (optical) up to 19,200 × 19,200 dpi (interpolated) cis's led light properties led radiation output max. 1 mw wavelength red: 630 nm typical green: 525 nm typical blue: 465 nm typical emission duration continuous scan to email address me...
Page 183
Item specifications computer interface usb *11*12 lan (10 base-t/100 base-tx/1000 base-t) *6*11 wireless lan (ieee802.11b/g/n) *13 copy resolution up to 1,200 × 1,200 dpi copy speed a4: up to 45 cpm (copies per minute) letter: up to 45 cpm (copies per minute) wireless lan *13 antenna 1 × 1 (rx diver...
Page 184
Item specifications internet fax *6*7 communications protocol tcp/ip, smtp, pop3, smtp auth, pop before smtp email format mime base 64 content-type: image/tiff multipart/mixed (text/plain, image/tiff) attachment file format data format rfc3949 (rfc2301), tiff-fx minimal set profile: tiff-f encoding ...
Page 185
Itu-t no.1 test chart 14.1 specifications operating instructions 185.
Page 186
Supported recording paper size : supported duplex printing. ▲ : not supported duplex printing. Paper size standard input tray multi-purpose tray lower input tray (da-fap109) lower input tray (da-fap110) portrait landsca pe portrait landsca pe portrait landsca pe portrait landsca pe letter *1 — legal...
Page 187
Paper size standard input tray multi-purpose tray lower input tray (da-fap109) lower input tray (da-fap110) portrait landsca pe portrait landsca pe portrait landsca pe portrait landsca pe custom ▲ *1*2 — ▲ *2 — — — ▲ *2 — *1 ag/sx models only. *2 when printing with the computer or when copying, cust...
Page 188
Tray type paper type input tray capacity *1 output tray capacity *2 multi-purpose tray thin paper (60 g/m² to 75 g/m²) 100 *3 150 plain paper (75 g/m² to 80 g/m²) 100 *3 150 plain paper (80 g/m² to 105 g/m²) 75 *3 150 thick paper (105 g/m² to 165 g/m²) 25 25 thick paper (165 g/m² to 220 g/m²) 1 1 la...
Page 189
Paper size (width × length) item specifications plain paper/thin paper/thick paper/label a4 210 × 297 mm (8.3 × 11.7 inch) a5 148 × 210 mm (5.8 × 8.3 inch) a6 105 × 148 mm (4.1 × 5.8 inch) letter 216 × 279 mm (8.5 × 11 inch) legal *1 216 × 356 mm (8.5 × 14 inch) b5 (iso) 176 × 250 mm (6.9 × 9.8 inch...
Page 190
*2 for simplex printing *3 for duplex printing *4 da-fap110 only toner cartridge life the toner cartridge needs to be replaced regularly. Toner cartridge life depends on the amount of content in a printed document as below. The page counts are on the basis of “iso/iec 19752” *1 when printing a4/lett...
Page 191
Waste disposal method waste material should be disposed of under conditions which meet all national and local environmental regulations. 14.1 specifications operating instructions 191.
Page 192: Only)
14.2 information of copyrights and licences (lan supported models only) * "this product includes cryptographic software written by * eric young (eay@cryptsoft.Com)" * the word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * * "this pr...
Page 193: Index
Index symbols #101 date and time.................................................... 30 #102 your logo........................................................... 49 #103 your fax number................................................ 49 #110 language.....................................................
Page 194
#549 firmware update............................................. 130 #557 wsd (web service for devices)..................... 128 #559 airprint.............................................................128 #567 address book editing on web.......................... 128 #568 caller id list on web......
Page 195
Dhcp mode (feature #500).................................... 127 dial keypad entry restriction (feature #421)............ 123 dialling mode (feature #120).....................................50 direct print feature......................................................75 directory.......................
Page 196
Mobile printing.......................................................... 140 mode restriction activating (feature #154).................................... 136 administrator code (feature #151)........................ 50 counter view (feature #479)............................... 138 department code...
Page 197
Scan features............................................................. 85 scan mode (feature #493)........................................ 85 scan parameter hold (feature #494)......................... 85 scanner glass......................................................43,105 secure print........
Page 198
Note 198 operating instructions.
Page 199
Note operating instructions 199.
Page 200
Pnqx7872za d1215ku0 panasonic system networks co., ltd. 2016.