Panasonic KX-MC6040 - Color Laser Multi-Function Printer Quick Reference Manual - page 19
3. Help
19
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
“
Out of Paper Input Tray
#1
”
L
Recording paper is not installed or the paper input tray has run out of paper.
Install paper.
L
Recording paper was not fed into the unit properly. Reinstall the paper.
Note:
L
“
#1
”
: Standard input tray
L
“
#2
”
: Optional input tray
L
“
#1+#2
”
: Standard input tray and optional input tray
“
Paper Jammed
”
L
A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper.
“
PC Fail or Busy.
”
L
The cable or the computer power cord is not connected correctly. Check the
connections.
L
The software is not running on the computer. Restart the software and try
again.
“
Please Wait
”
L
The unit is warming up. Wait for a while.
“
Redial Time Out
”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
“
Remove Document
”
L
The document is jammed. Remove the jammed document.
L
Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using
the automatic document feeder. Press
{
Stop
}
to remove the document.
Divide the document into two or more sheets and try again.
“
RX Memory Full
”
L
The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
L
If feature #442 is set to
“
Always
”
,
–
check the connection between the computer and the unit.
–
check the computer is turned ON.
L
If feature #448 is set to
“
On
”
,
–
view, print or save the received fax documents, and then erase the
unnecessary documents.
–
turn the setting to
“
Off
”
. The fax documents stored in memory will be
printed automatically.
–
set feature #449 to
“
On
”
, and then print the received fax documents.
“
Scanner Position Error
”
L
There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“
Self Calibration
”
L
The unit is changing the color calibration. Wait for a while.
“
Transmit Error
”
L
A transmission error occurred. Try again.
“
Toner Cartridge Not
Installed
”
L
The toner cartridge is not installed. Install it.
“
Tray #2 Left Cover
Open
”
L
The left cover of the optional input tray is open. Close it.
“
Waste Toner Not
Installed
”
“
Waste Toner Cartridge
Not Installed
”
L
The waste toner cartridge is not installed. Install it.
Display
Cause & Solution
MC6040-PNQW1437ZA-QRG-en.book Page 19 Wednesday, July 16, 2008 3:31 PM