Panasonic KX-TG2130 Operating Instructions Manual - Answering System
Answering System
24
For assistance, please visit http://www.panasonic.com/help
2
Let the phone ring 10 times.
3
After the unit picks up the call, enter the
remote code, then press {4}.
L
If you do not enter the remote code
within 7 seconds, the unit
disconnects your call.
L
You can hang up or begin remote
operation.
Answering system
settings
Remote code
A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorized parties
from listening to your messages remotely.
The default setting is “123”.
1
Press {ANSWER}, then press {*}.
2
Enter the desired 3-digit remote code.
3
Press {*}.
L
The digits of the code stored are
announced, then the voice guidance
starts.
4
Press {OFF}.
RING SELECT switch
You can change the number of times (3
rings or 5 rings) the phone rings before the
unit answers calls. The default is 5 rings.
Change the ring count by adjusting the
RING SELECT switch on the bottom of the
base unit. (page 10)
For Voice Mail service subscribers
If you subscribe to a flat-rate service
package that includes Caller ID, Call
Waiting, Voice Mail, and unlimited local/
regional/long distance calls, please note
the following:
L
To use the Voice Mail service provided
by your telephone service provider
rather than the unit’s answering system,
turn off the answering system (page 20).
This unit does not have an indicator to
indicate if there are new messages in
your mailbox service.
L
To use this unit’s answering system
rather than the Voice Mail service
provided by your telephone service
provider, please contact your telephone
service provider to deactivate your Voice
Mail service.
If your telephone service provider
cannot do this:
– Set this unit’s RING SELECT switch
so that this unit’s answering system
answers calls before the Voice Mail
service of your telephone service
provider does. It is necessary to check
the ring count required to activate the
Voice Mail service provided by your
telephone service provider before
changing this setting.
– Change the ring count of the Voice
Mail service so that the answering
system can answer the call first. To do
so, consult your telephone service
provider.
Handset
RING SELECT switch