1. DL manuals
  2. Panasonic
  3. Cordless Telephone
  4. KX-TG6431
  5. Quick Manual

Panasonic KX-TG6431 Quick Manual

Manual is about: Panasonic Expandable Digital Cordless Answering System Operating Instructions

Summary of KX-TG6431

  • Page 1

    Pnqw1485ya dm1108dm1128 setting up base unit l use only the supplied panasonic ac adaptor pqlv219. (120 v ac, 60 hz) to single-line telephone jack (rj11c) dsl/adsl filter* (not supplied) *for dsl/adsl service users charge for about 7 hours handset charger (120 v ac, 60 hz) confirm “charging” is disp...

  • Page 2

    – 2 – operating tips navigator key/ ? (volume) key by pressing this key ({^} or {v}) repeatedly, you can: − scroll through (up or down) various lists or items − adjust the receiver or speaker volume (up or down) while talking − move the cursor (left or right) to edit number or name soft keys the han...

  • Page 3

    – 3 – basic operations making/answering calls (handset) making calls dial the phone number. I {c}/{s} answering calls {c} /{s} to hang up { off} to adjust the receiver or speaker volume press {^} or {v} repeatedly while talking. Making a call using the redial list { redial} i {v}/{^}: select the des...

  • Page 4

    – 4 – frequently asked questions question cause/solution why is _ displayed? L the handset is too far from the base unit. Move closer. L the base unit’s ac adaptor is not properly connected. Reconnect ac adaptor to the base unit. L you are using the handset or base unit in an area with high electric...

  • Page 5

    – 5 – quick troubleshooting place the handset on the base unit, then check if “charging” is displayed. “charging” is not displayed. “charging” is displayed. Unplug and then plug ac adaptor properly to both the base unit and ac outlet. Unplug the ac adaptor of the base unit and remove the batteries f...

  • Page 6

    – 6 – quick troubleshooting lift up the handset from the base unit or charger. Press {c} at the handset, then check if the display shows “talk”. Check if the telephone cord is properly connected to both the base unit and telephone line jack on the wall. Try to connect your telephone into a different...

  • Page 7

    – 7 – registering a handset to a base unit the supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. { menu} i {#}{1}{3}{0} press and hold {locator} for about 4 seconds until the registration tone sounds. L the ...

  • Page 8: Important!

    – 8 – important! If your product is not working properly ... 1 reconnect ac adaptor to the base unit. 4 read faq in this quick guide and troubleshooting page in the operating instructions. 2 check if telephone line cord is connected. 3 use rechargeable ni-mh batteries. (alkaline/manganese/ni-cd batt...