Panasonic KX-TG9471 Operating Instructions Manual - page 12
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/help
Making calls
Using the base unit :
1
Dial the phone number.
L
To correct a digit, press {CLEAR}.
2
Lift the corded handset.
L
An available line is automatically selected
and either the LINE1 indicator or LINE2
indicator lights up. To change the line
selection mode, see page 17.
L
You can also select the line manually by
pressing {LINE 1} or {LINE 2} before lifting
the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
Note:
L
You can also dial the phone number after lifting
the corded handset.
L
To switch to the cordless handset, press {LINE
1} or {LINE 2} on the cordless handset, then
place the corded handset on the cradle.
Using the speakerphone
1
During a conversation with the corded
handset, press {SP-PHONE} to turn on the
speakerphone.
L
You can place the corded handset on the
cradle.
L
Speak into the MIC.
L
Speak alternately with the other party.
2
When you finish talking, press {SP-PHONE}.
Note:
L
For best performance, use the speakerphone in
a quiet environment.
L
To switch to the receiver, lift the corded handset.
Using the handset Y
1
Lift the handset and dial the phone number.
L
To correct a digit, press {CLEAR}.
2
{C}
L
An available line is automatically selected
and the line number is displayed. To change
the line selection mode, see page 17.
L
You can also select the line manually by
pressing {LINE 1} or {LINE 2}.
3
When you finish talking, press {OFF} or place
the handset on the charger.
Note:
L
The LINE1 indicator or LINE2 indicator on the
base unit lights up while using the handset.
Using the speakerphone
1
During a conversation, press {s} to turn on
the speakerphone.
L
Speak alternately with the other party.
2
When you finish talking, press {OFF}.
Note:
L
For best performance, use the speakerphone in
a quiet environment.
L
To switch to the receiver, press {C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the
redial list in each unit (each 48 digits max.).
1
{
REDIAL}
2
{V}
/{^}: Select the desired phone number.
3
Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
:
Base unit / Y Handset
:
Base unit / Y Handset
TG939x(e).book Page 18 Friday, January 29, 2010 2:41 PM