1. DL manuals
  2. Panasonic
  3. Baby Monitor
  4. VL-W605
  5. Installation Manual

Panasonic VL-W605 Installation Manual

Summary of VL-W605

  • Page 1

    Installation guide wireless monitor station model no. Vl-w605 vl-w617 thank you for purchasing a panasonic product. Please read before use and save l vl-w605 is an accessory unit of the vl-sw250 series, vl-mw250 series, vl-sw251 series, and vl- mw251 series. L vl-w617 is an accessory unit of the vl-...

  • Page 2: Table of Contents

    2 table of contents product names used in this installation guide for plain explanation, the product names used in this guide are described as follows. Product figure description in this guide (product name) sub monitor station (wireless monitor station) main monitor station (main monitor) note: l i...

  • Page 3: For Your Safety

    Important information 3 for your safety to prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit. Warning power connection luse only the power source marked on the unit. If you are not sure of the type of p...

  • Page 4: Other Information

    Important information 4 important safety instructions when using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Do not use this unit near water. For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in ...

  • Page 5

    Preparation 5 charging the sub monitor station 1 insert the battery. (for the vl-w617, first remove the battery cover.) a align the terminals and insert. B close the battery cover. L the battery level is displayed as . Terminals a do not remove the pad at the back of the battery cover. B 2 assemble ...

  • Page 6: (Registration)

    Preparation 6 registering the sub monitor station to the main monitor station (registration) the operations described here are based on the vl-sw251 series main monitor. See the operating instructions of the video intercom system for more information. When registering the product to a main monitor o...

  • Page 7

    Preparation 7 canceling registration of the sub monitor station (cancellation) you can cancel the registration of a sub monitor station if you do not use it. Using the main monitor station 1 press {menu}, then select “registration/ cancellation” by pressing { volume} ( ▲ ) or { page} (▲). Function s...

  • Page 8: Specifications

    General information 8 specifications sub monitor station power supply: ni-mh battery (3.6 v dc / 650 mah) dimensions: approx. Height 157 mm x width 52 mm x depth 35 mm (excluding protruding sections) mass (weight): approx. 175 g (including the battery) operating environment: 0 °c to 40 °c, up to 90 ...