Panasonic WV-TW310L Installation Manual - Install The Software
24
Configure the network settings
Install the software
Beforeinstallingthesoftware,readthereadmefileontheprovidedCD-ROMfirst.
Software included on the provided CD-ROM
• PanasonicIPsettingsoftware
Configurethenetworksettingsofthecamera.Refertothefollowingforfurtherinformation.
• ViewerSoftware"NetworkCameraView4S"
Itisnecessarytoinstalltheviewersoftware"NetworkCameraView4S"todisplayimagesona
PCandtosetuptheWearableCamerabasicconfiguration.Installtheviewersoftwarebydou-
ble-clicking the "nwcv4Ssetup.exe" icon on the provided CD-ROM. Refer to the WV-TW310
OperatingInstructions(includedintheCD-ROM)formoredetails.
• WearableCameraAgentSoftware
ItisnecessarytoinstalltheWearableCameraAgentSoftwaretouploadthevideoimagedata
fromthecameras.
• WearableCameraViewerSoftware
ItisnecessarytoinstalltheWearableCameraViewerSoftwaretoplaythevideoimagedata.
Configure the network settings of the camera using the
Panasonic IP setting software
It is possible to perform the network settings of the camera using the IP setup software on the pro-
vided CD-ROM. When using multiple cameras, it is necessary to configure the network settings of
each camera independently.
If the Panasonic IP setting software does not work, configure the network settings of the camera
and the PC individually on the "Network" page of the setup menu. Refer to the Operating
Instructions (included in the CD-ROM) for further information.
IMPORTANT:
• When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert"
window may be displayed when starting the IP setup software. In this case, disable "User
Account Control" from the control panel.
• For the security enhancement, the MAC address/IP address of the camera to be configured
will not be displayed when about 20 minutes have passed after turning on the power of the
camera. (When the effective period is set to "20min" in the IP setup)
However cameras in the initial set mode are still displayed even after 20 minutes.
• Panasonic IP setting software is inoperable in other subnets via the same router. When config-
uring the IP address of the camera for the first time, configure the PC's IP address to
192.168.0.xxx.
• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).
z
Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the
provided CD-ROM.
• The License Agreement will be displayed. Read
the Agreement and choose "I accept the term
in the license agreement", and click [OK].
x
Click the [Network Settings] button after select-
ing the MAC address/IP address of the camera
to be configured.