PlayStation CECHYA-0090 Instruction Manual - Charging Your Headset
10
Charging your headset
When remaining battery level is low, the status indicator
flashes red and you’ll hear a beep. Charge the battery by
connecting the headset to a supported USB device such as a
PC. While the battery is charging, the status indicator lights
up red. The status indicator turns off when the battery is fully
charged.
Hints
ˎ
You can view the remaining battery charge on the PS4™
system. It is shown on the status display that appears when
you change the headset settings.
ˎ
You might not be able to charge the battery if the USB
device or the USB hub does not provide enough power for
charging. Try connecting the headset to a different USB
device or a different USB port on the device.
ˎ
Charging takes approximately 3.5 hours when starting with
no battery charge left.
ˎ
When the remaining battery charge is low, the headset
beeps while it is connected and receiving an audio signal.
ˎ
If you do not plan to use your headset for an extended
period of time, it is recommended that you fully charge it at
least once a year to help maintain battery functionality.
Battery
Caution – using the built-in battery:
ˋ
This product contains a lithium-ion rechargeable battery.
ˋ
Before using this product, read all instructions for handling
and charging the battery and follow them carefully.
ˋ
Take extra care when handling the battery. Misuse can
cause fire and burns.
ˋ
Never attempt to open, crush, heat or set fire to the battery.
ˋ
Do not leave the battery charging for a prolonged period of
time when the product is not in use.
ˋ
Always dispose of used batteries in accordance with local
laws or requirements.
ˋ
Do not handle the damaged or leaking battery.
ˋ
If the internal battery fluid leaks, stop using the product
immediately and contact technical support for assistance. If
the fluid gets on to your clothes, skin or into your eyes,
immediately rinse the affected area with clean water and
consult your doctor. The battery fluid can cause blindness.