PlayStation CECHYA-ZRA2 Instruction Manual - Pair Your Controller
6
Pair your controller
You’ll need to pair your controller when you use it for the first time and when you use it with
another PS4™ system.
With your PS4™ system either on or in rest mode, connect your controller using a USB cable,
and then press the
2
(PS) button. Your controller pairs with the system and turns on. After
you’ve paired your controller, you can disconnect the USB cable and use your controller
wirelessly.
Charge your controller
Make sure your controller is charged and ready to go before you start playing.
With your PS4™ system either on or in rest mode, connect your controller to your system
using a USB cable.
To charge your controller while your system is in rest mode, select an option other than [Off]
in
(Settings) > [Power Save Settings] > [Set Features Available in Rest Mode] > [Supply
Power to USB Ports].
To the PS4™ system
The sphere flashes slowly when charging, and stops flashing when charging is complete.
Hint
Use a USB cable that complies with the USB standard. You might not be able to charge the
controller on some devices.
Battery
Caution – using the built-in battery:
ˋ
This product contains a lithium-ion rechargeable battery.
ˋ
Before using this product, read all instructions for handling and charging the battery and
follow them carefully.
ˋ
Take extra care when handling the battery. Misuse can cause fire and burns.
ˋ
Never attempt to open, crush, heat or set fire to the battery.