Playvision HBT-914H100 User Manual - III.
1
4.
Operates for TMDS clock frequencies up to 300MHz.
5.
POE(Power Over Ethernet)function support, splitter powered
12V@5A, the 4 receivers don’t need power form the DC jack.
POE
Power Consumption less than 40W.
6.
Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to
achieve long distances transmission.
7.
UTP cable termination follows the standard of IEEE-568B.
8.
Transmission distance:
100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit;
3D 1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.
9.
Supports EDID control via EDID selector.
10.
Transfer Bidirectional Infrared control signal together with the
HDMI signal.
III.
Package
1.
HD BaseT Splitter -------------------------------------------------- 1PCS
2.
HD BaseT Receiver(HBT-E100 RX) ---------------------------- 4PCS
3.
Wideband IR Tx ---------------------------------------------------- 5PCS
4.
Wideband IR Rx ---------------------------------------------------- 5PCS
5.
12V5A DC Power Supply adapter ------------------------------ 1PCS
6.
Operation Manual ------------------------------------------------- 1PCS
IV.
Specifications
1.
Frequency Bandwidth 2.97Gbps
2.
HD BaseT Splitter Input/Output Ports 1x HDMI Female port/4 x CAT6
1x IR Transmitter/1x IR Receiver
3.
HD BaseT Receiver Input/Output Ports 1 x HDMI Female port/1 x CAT6
1x IR Transmitter/1x IR Receiver
4.
Power Supply DC 12V 5A
5.
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
6.
Dimensions (mm)
Splitter: 115(W) X 270 (D) X 45 (H)
Receiver: 65(W) X 100 (D) X 25 (H)