Playvision HDM-962 User Manual - page 7
Manual is about: HDMI 1.4 Matrix 6×2
of
9
6
Attention:
1. The Toslink and Stereo audio follow the OUT A HDMI audio.
2. The In6
(
The sixth input port
)
support MHL input only,use
MHL to HDMI Cable to connect smart phone and matrix.
Remote control
STANDBY: Press this button will standby or power on the matrix.
Audio EDID: Press this button will Select the audio output
mode (2.0CH,5.1CH,7.1CH), and the LED will indicate
the corresponding state .
ARC: Press this button will Open or close the ARC function,
and the LED will indicate the corresponding state.
PIP: Press this button will Open or close the PIP function.When open PIP function,the OUTA
and OUTB will switch to the same input source.