Pleasant Hearth OFW103RI User manual

1

X

4

5

PACKAGE CONTENTS

2

3

6

HARDWARE CONTENTS 

ASSEMBLY INSTRUCTIONS

3.  Attach support ring (J) to legs (I) using M6 

  bolt (CC). Secure with wrench (FF) but 

  do not tighten at this time. 

3

I

CC

Hardware Used

x 4

CC

M6X18 Bolt

1

Questions, problems, missing parts?

 Before returning to your retailer, call our customer 

service department at 1-877-447-4768, 8:30 a.m. - 4:30 p.m., CST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number

Purchase Date

ITEM #0000000

MODEL #OFW103RI

Français p. 9

Español p. 17

34 IN. ELIZABETH

SLATE FIRE PIT

70-10-003 

Wa r m i n g   Yo u r     H o m e.    W a r m i n g   Y o u r   H e a r t.

A

E

I

B

A

C

D

F

G

H

J

    PART            DESCRIPTION            QUANTITY

 A  Handle 

1

  B 

Mesh Wire Cover 

1

  C 

Bowl Cover/Table Top 

1

  D 

Cooking Grid 

1

  E 

Wood Grate 

1

  F 

Fire Bowl 

1

    PART            DESCRIPTION            QUANTITY

  G 

Ash Catcher 

1

  H 

Slate Top 

1

 I  Legs 

4

  J 

Support Ring 

1

 K  Poker 

1

AA

BB

CC

DD

EE

 M5X10 Bolt

Qty. 3

 M5 Nut

Qty. 3

 M6X18 Bolt

Qty. 4

M6 Keps Nut

Qty. 1

M6 Nut

Qty. 8

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install 

the product. If you have any questions regarding the product, please call customer service at 

1-877-447-4768, 8:30 a.m. - 4:30 p.m., CST, Monday - Friday.

     WARNINGS:

• 

FOR OUTDOOR USE ONLY! NEVER LEAVE FIRE UNATTENDED!

• 

DO NOT

 allow children or pets near the fire pit without supervision.

• 

DO NOT

 touch surface of iron fire grate or fire bowl while in use.

• 

NEVER 

burn in vehicles, tents or indoors. 

• 

NEVER 

place cover on fire pit when in use. Ensure fire pit and mesh wire cover have cooled 

  before placing cover over fire pit.

• Lift mesh wire cover by using poker when in use.

     CAUTIONS:

• Burn only wood or fire logs in the fire pit.

• 

DO NOT

 use gasoline or kerosene to start the fire in your fire pit.

• 

DO NOT

 use this unit on a wood deck, long or dry grass and/or leaves, or on combustible 

  surfaces.

• 

DO NOT 

place or use fire pit under the canopy of trees as dry or falling leaves may catch fire. 

• 

DO NOT

 stand or place objects over 25 lbs. onto bowl cover/table top as this may cause damage.

• 

DO NOT

 attempt to move the fire pit while it is hot or in use. 

• Place the fire pit no closer than 8 feet from walls or combustibles during use.

• Adequate fire extinguishing material should be readily available.

• Always ensure that the mesh wire cover is secured over fire bowl while in use.

• Poker handle may become hot during and after use.

• Use heat-resistant gloves to handle hot tools.

PROPOSITION 65 WARNING: Fuels used in wood and charcoal burning appliances and the 

products of combustion of such fuels, contain chemicals known to cause cancer, birth 

defects or other reproductive harm.

Consumers should check State, Provincial, in addition to local codes and regulations 

regarding the use of the product.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with 

package contents list and hardware contents above. If any part is missing or damaged, do not 

attempt to assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 15 minutes

Tools Required for Assembly: Wrench (included), Phillips Screwdriver (not included).

ASSEMBLY INSTRUCTIONS

1.  Insert handle (A) into hole in mesh wire cover (B). 

     Use wrench (FF) to secure M6 Keps nut (DD) to

  the underside of the mesh wire cover. 

1

Hardware Used

DD

x 1

M6 Keps Nut

FF

x 1

Wrench

Hardware Used

AA

x 3

M5x10 Bolt

2.  Attach ash catcher (G) to fire bowl (F) using 

  M5 bolt (AA) and M5 nut (BB). Tighten with 

  wrench (FF) and screwdriver.

2

BB

x 3

M5 Nut

FF

x 1

Wrench

DD

B

A

F

G

AA

BB

7

4.  Attach legs (I) to the slate top (H), using M6 

  nut (EE). Tighten all screws (including 

  screws from step 3) with screwdriver and

  wrench (FF). 

4

EE

Hardware Used

x 8

EE

M6 Nut

J

I

H

5.  For firepit use, put bowl (F) onto the slate top 

  assembly, put wood grate (E) into bowl (F), 

  put mesh wire cover (B) onto bowl (F). Keep 

  poker (K) near fire pit for use anytime. 

5

F

K

6.  For barbeque use, remove mesh wire cover, put

  cooking grid (D) onto bowl (F). Keep poker (K) 

  near fire pit for use anytime. 

6

ASSEMBLY INSTRUCTIONS

B

E

F

K

D

CARE AND MAINTENANCE

• To extend the life of your fire pit, clean it after each use and cover the unit to protect it 

   from the elements. 

• To protect fire pit finish, use a soft cloth in lieu of bare hands while handling.

• Use a soft cloth to wipe fire pit and poker.

• Do not attempt to clean while hot.

• Clean ash catcher after each use once ashes have cooled.

• Store in a cool, clean, dry place.

ONE YEAR LIMITED FRAME WARRANTY

If within one year from the date of original purchase, this item fails due to a defect in material or 

workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain 

warranty service, call 1-877-447-4768, Monday – Friday, 8:30 a.m. – 4:30 p.m. CST.  This warranty 

does not cover defects resulting from improper or abnormal use, misuse, accident, or alteration. 

Failure to follow all instructions in the owner’s manual will also void this warranty. The manufacturer

will not be liable for incidental or consequential damages, or common erosion of outdoor products. 

Some provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation may not apply to you. This warranty gives you specific legal rights, and you may also have 

other rights which vary from province to province.

GHP Group, Inc. 

8280 Austin Avenue, Morton Grove, IL. 60053-3207

K

FF

M6/M5 Wrench

Qty. 1

FF

x 1

Wrench

8

Printed in China

30-10-003

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-877-447-4768, 

8:30 a.m. - 4:30 p.m., CST, Monday - Friday.

PART  

DESCRIPTION 

PART #

 A  Handle 

40-07-453

 B  Mesh Wire Cover 30-05-001

  C 

Bowl Cover/Table Top 

30-05-002

  D 

Cooking Grid 

30-01-001

  E 

Wood Grate 

30-01-002

  F 

Fire Bowl 

30-01-003

  G 

Ash Catcher 

40-08-116

  H 

Slate Top 

30-01-004

  I 

Legs  

30-01-005

  J 

Support Ring 

30-06-001

 K  Poker 

30-04-001 

A

E

I

B

A

C

D

F

G

H

J

K

7.  For table (leisure) use, place mesh wire cover (B) 

  upside down onto support ring (J) put bowl (F) 

  onto the slate top assembly, put wood grate (E) 

  into bowl (F), put cooking grid (D) into bowl (F).  

  Set bowl cover/table top (C) on bowl (F).   

7

J

F

C

B

FF

x 1

Wrench

              DESCRIPTION 

PART #

                 Hardware Pack 

30-09-001