1. DL manuals
  2. Plextor
  3. CD/CDR Drive
  4. PX-800A
  5. Installation And User Manual

Plextor PX-800A Installation And User Manual

Manual is about: Internal ATAPI Drive

Summary of PX-800A

  • Page 1

    Model px-800a internal atapi drive dvd±r dl (double layer/dual layer), dvd±r/rw, dvd-ram, cd-r/rw drive installation and users manual march 2007.

  • Page 2: Record Your Serial Number

    Plextor reserves the right to make improvements in the products described in this manual at any time without prior notice. Plextor makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particu...

  • Page 3: III

    Px-800 installation and users manual iii caution: any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Laser information these products have been designed and manufactured according to iec 60825-1 on the...

  • Page 4

    Iv px-800a installation and users manual top view of internal drive, showing caution label location detail of px-800a laser caution labels.

  • Page 5

    Px-800a installation and users manual v this page intentionally left blank..

  • Page 6: Table of Contents

    Px-800 installation and users manual vi table of contents 1. Getting started .............................................................................. 1 about this manual........................................................................... 1 what’s in this manual ............................

  • Page 7: Vii

    Table of contents px-800a installation and users manual vii where to go from here................................................................33 3. Using your px-800a...................................................................35 what media to use...............................................

  • Page 8: Viii

    Table of contents viii px-800a installation and users manual this page intentionally left blank..

  • Page 9: 1. Getting Started

    Px-800 installation and users manual 1 1. Getting started congratulations! Thank you for purchasing the plextor® px-800a, a reliable, high-performance recordable dvd and cd writer, rewriter, and player. We appreciate the confidence you have shown in us. Our goal is to put you—and keep you—on the lea...

  • Page 10: Meet Your Px-800A

    Section 1. Getting started 2 px-800a installation and users manual meet your px-800a the px-800a is a dvd rewritable/cd rewritable drive that provides professional quality dvd and cd performance for writing, rewriting and reading. What the px-800a does for dvds, the px-800a: • writes dvd+r (“plus” f...

  • Page 11: Dvd Features

    Section 1. Getting started px-800a installation and users manual 3 • high speed transfers: the px-800a supports data transfers via ultra dma mode 4, dma mode 2, and pio mode 4. • mmc compliance: supports the mmc-4 command set. • flash memory: allows upgrading the px-800a to the latest firmware revis...

  • Page 12: Cd-R And Cd-Rw Features

    Section 1. Getting started 4 px-800a installation and users manual • dvd multi recorder: supports the dvd multi specification for read and write; can read and write dvd-ram, dvd-rom, dvd-video, multi-border, multi-session and dvd±vr. • versatile recording modes for dvd+r/rw: including disc-at-once (...

  • Page 13: •  Computer:

    Section 1. Getting started px-800a installation and users manual 5 minimum configuration to use the px-800 here’s what you’ll need in order to install and use the px-800 drive. • computer: px-800a: computer cpu, memory, and configuration dependent on installed application requirements. • interface: ...

  • Page 14: About Software

    Section 1. Getting started 6 px-800a installation and users manual about software in order to record on dvd±r dl, dvd±r/rw, and cd-r/rw discs you will need to have mastering, packet writing, or duplication software installed on your computer system. If you purchased a retail kit from plextor, you’ll...

  • Page 15: Where to Go From Here

    Section 1. Getting started px-800a installation and users manual 7 • do not attempt to open the drive and service it yourself. Removing the cover may expose you to harmful electrical voltages or the laser beam. For your safety, entrust service to experienced service personnel only. • keep your dvds ...

  • Page 16: 2. Installing The

    Px-800 installation and users manual 8 2. Installing the px-800a internal atapi drive this section explains how to physically install your px-800a internal atapi drive in your computer. Px-800a drive features and controls before proceeding, become familiar with the controls and features of your plex...

  • Page 17

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 9 • eject button: push once to eject tray. Push again to insert the tray back into the px-800a. To prevent wear on the drive, always use the eject button to insert the tray. Rear panel—px-800a internal drive...

  • Page 18: Save Your Box!

    Section 2. Installing the px-800a internal atapi drive 10 px-800a installation and users manual • ide cable connector: connects to your computer’s ide (atapi) interface using 80-conductor ultra cable. Note: although the px-800a will operate with a 40-wire ide cable, it may not be able to write dvds ...

  • Page 19

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 11 if the security sticker on top of your box is cut, there may be a good reason: for example, a dealer may have added other components or software. Carefully check the contents to ensure nothing has been re...

  • Page 20: Mount The Px-800A Drive

    Section 2. Installing the px-800a internal atapi drive 12 px-800a installation and users manual px-800a quickstart installation for experienced pc users only if you’ve installed computer peripherals before, use this quickstart installation to get up and running quickly. Important note: to ensure max...

  • Page 21: Installation

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 13 4. Make all necessary cabling connections: ide cable, power cable, and audio cable. 5. Turn your computer system on. The following pages give more details for this procedure. Open the computer and prepare...

  • Page 22

    Section 2. Installing the px-800a internal atapi drive 14 px-800a installation and users manual figure 3: removing a typical computer's cover determine your existing ide configuration with your computer open, determine the existing ide configuration. You can do this by looking at the ide ribbon cabl...

  • Page 23

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 15 before you install your px-800a, your computer’s ide configuration is usually one of the following: • configuration a: hard disks connected as master and slave devices on primary ide port; dvd or cd-rom d...

  • Page 24

    Section 2. Installing the px-800a internal atapi drive 16 px-800a installation and users manual confirm that you have an 80-conductor ide cable how can you tell? The 80-conductor cable is slightly wider than the older 40-conductor version. The wires in the 80-conductor version are narrower, too. Fig...

  • Page 25: Do You Have Cable Select?

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 17 do you have cable select? Many computers from major manufacturers use special cable select cables. The cable select cable typically has markings that identify the connectors for master, slave, and motherb...

  • Page 26: Do You Need A Power Cable?

    Section 2. Installing the px-800a internal atapi drive 18 px-800a installation and users manual if you are unsure whether or not your system has a cable select cable installed, either look at the cable or look at the jumpers on the existing dvd-rom or cd-rom drive. If any device is jumpered as cable...

  • Page 27: Drive

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 19 changing the mode jumper on your px-800a drive the drive arrives from the factory with its mode jumper set to master. (a function is on if the jumper is installed and off if the jumper is removed.) figure...

  • Page 28: Changing Jumper Settings

    Section 2. Installing the px-800a internal atapi drive 20 px-800a installation and users manual for example, to change the drive to be a slave, move the jumper to the middle set of mode pins, leaving the other pins uncovered. To change the drive for cable select, move the jumper to the left set of m...

  • Page 29: Select An Ide Configuration

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 21 select an ide configuration set the px-800a’s jumper and cable it according to the desired configuration. Keep these rules in mind: • for best dvd±rw and cd-rw performance, try to connect the px-800a to t...

  • Page 30

    Section 2. Installing the px-800a internal atapi drive 22 px-800a installation and users manual note: the configuration shown in figure 8 can make it very difficult to write from the dvd or cd drive to the px-800a at maximum rated speed using “on-the-fly” copying. System configuration and performanc...

  • Page 31: Set Up In Configuration B

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 23 before px-800a installation how to install the px-800a b hard disk connected as master device, and cd-rom or dvd- rom drive connected as slave on the primary ide port; nothing connected to secondary ide p...

  • Page 32: Set Up In Configuration C

    Section 2. Installing the px-800a internal atapi drive 24 px-800a installation and users manual before px-800a installation how to install the px-800a c hard disk connected as master device on primary ide port; nothing connected to secondary ide port. Set the mode jumper to master, and connect the p...

  • Page 33: Set Up In Configuration D

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 25 before px-800a installation how to install the px-800a d system uses special cable select cables; all devices are jumpered for cable select. Set the px-800a’s mode jumper to csel, and connect the drive to...

  • Page 34: About Cable Select

    Section 2. Installing the px-800a internal atapi drive 26 px-800a installation and users manual about cable select the cable select jumper position sets the px-800a drive to use the csel signal from the ide interface for configuration purposes. This signal automatically selects the correct master/sl...

  • Page 35: Mount The Px-800A Drive

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 27 mount the px-800a drive before proceeding to install the px-800a drive in your personal computer, double-check your jumper setting. Record the serial number record the serial number of your drive on the i...

  • Page 36: To Mount The Px-800A Drive:

    Section 2. Installing the px-800a internal atapi drive 28 px-800a installation and users manual to mount the px-800a drive: 1. Make sure the power to your computer and any external peripherals is turned off and your computer is unplugged from its power source. 2. If you haven't already removed the c...

  • Page 37

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 29 4. Determine if you must install mounting rails on the sides of your drive. To do so, insert the drive into the open bay. If the drive fits tightly with little or no clearance on either side of the drive,...

  • Page 38: Center Connector Free.

    Section 2. Installing the px-800a internal atapi drive 30 px-800a installation and users manual 6. Plug one connector of the 80-conductor ide/ata cable into the ide connector on the rear panel of the drive before you insert the drive into your computer. Then thread the cable through the front of the...

  • Page 39

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 31 caution: in the case of only one ide device, you must make certain that one end of the cable is always connected to the ide connector on the motherboard. The other end of the connector must be connected t...

  • Page 40

    Section 2. Installing the px-800a internal atapi drive 32 px-800a installation and users manual 10. Connect the analog audio cable if you want to use a sound board in your system. This cable runs from the four-pin analog audio output connector on the rear panel of your drive to the cd-rom audio conn...

  • Page 41: Where to Go From Here

    Section 2. Installing the px-800a internal atapi drive px-800a installation and users manual 33 using sound boards and audio cables whichever category your sound board falls into, you will find that the best source of information about installing the sound board in your computer is the board's manua...

  • Page 42

    Px-800 installation and users manual 34 this page intentionally left blank..

  • Page 43: 3. Using Your Px-800A

    Section 3. Using your px-800a px-800a installation and users manual 35 3. Using your px-800a this section explains how to use your px-800a drive and how to load, handle and care for your dvds and cds. What media to use use the right media! Your px-800a drive's capabilities change depending on which ...

  • Page 44: Dvd-Ram Media

    Section 3. Using your px-800 36 px-800a installation and users manual dvd-ram media unlike standard dvd media, you do not need special dvd burning software to write or read dvd-ram discs on a computer. You can access these discs like a floppy disk or hard drive. You can even write a dvd-ram disc wit...

  • Page 45: Tray Loading and Operation

    Section 3. Using your px-800a px-800a installation and users manual 37 you can write to ultra speed cd-rw discs only on drives that support this media. Drives that are capable of writing to ultra speed rewritable media, such as the plextor px-800a, are identified by a “compact disc rewritable ultra ...

  • Page 46: Handling Dvd and Cd Media

    Section 3. Using your px-800 38 px-800a installation and users manual note: always use the eject button to close the tray in a smooth and secure manner. Closing the tray by pressing the front of the drawer using your hand is not recommended and risks damage or premature wearing of the mechanism. Han...

  • Page 47: Mounting Position

    Section 3. Using your px-800a px-800a installation and users manual 39 figure 20: wipe the disc from the center outward hint: keep your frequently used discs in jewel cases at all times to prevent them from becoming dirty or damaged. Mounting position you can operate your px-800a drive in either a h...

  • Page 48: Writing to Dvd Media

    Section 3. Using your px-800 40 px-800a installation and users manual if you later insert a dvd with a different region code, you are prompted to either accept changing the new region code or not. If you don’t accept the change, then that dvd will not play. If you do accept the change, then the regi...

  • Page 49

    Section 3. Using your px-800a px-800a installation and users manual 41 using the disc/busy indicator the color and blink rate of the front-panel disc/busy indicator give you information about the drive’s operation. When you are writing to a cd-r or cd-rw disc, the color and blink rate of the front-p...

  • Page 50

    Section 3. Using your px-800 42 px-800a installation and users manual this page intentionally left blank..

  • Page 51: Cleaning The Px-800A Drive

    Px-800 installation and users manual 43 4. Maintenance and troubleshooting this section explains maintenance and troubleshooting procedures for your px-800a drive. With proper maintenance, you can prevent problems. If trouble arises, you can often solve many simple problems on your own, rather than ...

  • Page 52: Upgrading Firmware

    Section 4. Maintenance and troubleshooting 44 px-800a installation and users manual upgrading firmware plextor creates firmware revisions to meet the particular needs of large computer manufacturers. It is rare that these revisions will impact the performance or operation of your drive. However, we ...

  • Page 53: Emergency Eject

    Section 4. Maintenance and troubleshooting px-800a installation and users manual 45 emergency eject if the computer power is turned off or the automatic eject button at the front of the drive does not work, use this procedure to open the drive. To use the emergency eject tool to open the drive: 1. M...

  • Page 54

    Section 4. Maintenance and troubleshooting 46 px-800a installation and users manual changing the px-800a front-panel color by using the replacement bezel and disc tray face plate you can change the px-800a’s front-panel color in a few moments. Caution: avoid creating static electricity. Be sure to w...

  • Page 55

    Section 4. Maintenance and troubleshooting px-800a installation and users manual 47 5. Hold the disc tray securely and gently insert a small flat bladed screwdriver next to one of the tray hooks. Lever the tray face plate gently away from the tray and push the tray face plate slightly to release it ...

  • Page 56

    Section 4. Maintenance and troubleshooting 48 px-800a installation and users manual 7. With the drive right side up, release the two side bezel hooks. To release the hooks, press inward using the tip of a screwdriver or the eject tool. Figure 25: press in with the eject tool to release the two side ...

  • Page 57

    Section 4. Maintenance and troubleshooting px-800a installation and users manual 49 9. Position the new bezel in front of the drive and slide it gently in place. Ensure that the top clip and all three bezel hooks lock into place. Figure 27: slide the new bezel into position and make sure all three b...

  • Page 58: Troubleshooting

    Section 4. Maintenance and troubleshooting 50 px-800a installation and users manual troubleshooting if you have problems during or right after installation of your drive, first make sure the drive is recognized. If you still have problems, visit the plextor web site for tips and troubleshooting help...

  • Page 59

    Section 4. Maintenance and troubleshooting px-800a installation and users manual 51 3. In windows 2000, windows xp or windows vista, right-click on the my computer icon and select properties. Click on the hardware tab, then click on the device manager button. Click the + sign next to the dvd/cd-rom ...

  • Page 60: Rw?

    Px-800 installation and users manual 52 5. Frequently asked questions q: why do i need an 80-conductor ide cable for the px-800a? Your px-800a will operate with either the older 40-conductor cable or the newer 80-conductor ide/ata cable. However, the 80-conductor cable improves performance, and the ...

  • Page 61

    Section 5. Frequently asked questions px-800a installation and users manual 53 q: what's the difference between "double layer" and "dual layer"? A: nothing, really. It's simply a difference of opinion within the industry about how to label media and drive capabilities. Dvd+r dl (as named by the dvd+...

  • Page 62

    Section 5. Frequently asked questions 54 px-800a installation and users manual for example, 8x-rated media listed as “12x writing recommended” and “16x compatible” indicates the manufacturer believes this 8x-rated media can be written at 16x. Plextor factory testing has determined you will achieve t...

  • Page 63

    Section 5. Frequently asked questions px-800a installation and users manual 55 this page intentionally left blank..

  • Page 64: Usable Formats

    Px-800 installation and users manual 56 appendix a: px-800a specifications this appendix shows specifications for the px-800a drive. Specifications for the px-800a drive usable formats logical dvd read/write dvd-rom, dvd-video, multi-border, multi-session, dvd+vr, dvd-vr logical cd read/write cd-da,...

  • Page 65: Supported Media

    Appendix a: px-800 specifications px-800a installation and users manual 57 supported media supported media, dvd ƒ stamped dvds: single layer / double layer ƒ dvd-r: for general part 1 physical specification version 2.0 ƒ dvd-rw: part 1 physical specification version 1.1/1.2 ƒ dvd-r dl: physical spec...

  • Page 66: Recommended Media

    Appendix a: px-800 specifications 58 px-800a installation and users manual recommended media you can use virtually any media in your px-800a and be assured of the best possible write quality. However, plextor-recommended media are recordable or rewritable cd and dvd media that have been tested by pl...

  • Page 67: Performance Specifications

    Appendix a: px-800 specifications px-800a installation and users manual 59 performance specifications stamped dvd dvd ±r dl read speed, dvd sl dl dvd ±r dvd ±rw 16x cav – – – 12x cav 8x cav – – – 7x cav – – 5x cav 1x clv speed ram2(12x) ram ram (ver1) 12x pcav – – 8x pcav – – 6x pcav – – 5x pcav – –...

  • Page 68

    Appendix a: px-800 specifications 60 px-800a installation and users manual performance specifications (continued) read speed, cd speed mode-1 discs mode-2 discs cd-da discs 48x cav stamp,r stamp,r 40x pcav stamp,r, rw stamp,r, rw stamp,r, rw 32x cav stamp,r, rw stamp,r, rw stamp,r, rw 24x cav stamp,...

  • Page 69

    Appendix a: px-800 specifications px-800a installation and users manual 61 performance specifications (continued) write speed, dvd ± r/rw speed +r +rw +r dl –r –rw –r dl 18x cav – – – – 16x cav – – – – 13x cav – – – – 12x zclv – – – – 8x zclv – 6x zclv – – – – 6x clv – – 4x clv 2.4x clv – – – 2x clv...

  • Page 70

    Appendix a: px-800 specifications 62 px-800a installation and users manual performance specifications (continued) write speed, cd-r/rw speed cd-r ultra speed+ cd-rw media ultra speed cd-rw media high speed cd-rw media normal speed cd-rw media 48x cav – – – – 48x zclv – – – – 40x cav – – – – 40x zclv...

  • Page 71

    Appendix a: px-800 specifications px-800a installation and users manual 63 performance specifications (continued) dvd transfer rate (max) speed write (mb/s) read (mb/s) 18x 24.7 – 16x 22 22 13x 17.5 16620 12x 16.6 – 8x 11 11 7x 9.7 6x 8.2 8.2 5x 6.9 6.9 4x 5.5 – 3x 4.1 4.1 2.4x 3.3 – 2x 2.7 2.7 1x 1...

  • Page 72: Environmental Conditions

    Appendix a: px-800 specifications 64 px-800a installation and users manual wake mode environmental conditions mounting position horizontal or vertical orientation: ƒ horizontal: 0 degrees ±15 degrees ƒ vertical: 0 degrees ±15 degrees (front to back tilt) ƒ left side tilt +5 degrees /0 degrees eject ...

  • Page 73: Reliability

    Appendix a: px-800 specifications px-800a installation and users manual 65 frequency: 7-800 hz hz g^2/hz 7 0.0003 20 0.00275 140 0.00275 312 0.00013 400 0.00008 600 0.00008 700 0.00007 power off, no disc shock, operating data read with retry (no audio play) pulse duration and peak level cd read 6g, ...

  • Page 74: Dvd Regional Setting

    Appendix a: px-800 specifications 66 px-800a installation and users manual read error rate cd-rom mode 1: 12 block/ bit cd-rom mode 2: 9 block/bit dvd-rom: 12 block/bit seek error rate: 6 block/bit dvd regional setting compatibility rpc phase-2-compatible changing regional setting max. 5 times other...

  • Page 75

    Appendix a: px-800 specifications px-800a installation and users manual 67 disc loading auto rear panel, px-800a internal atapi drive power supply dc +12v, ±10% dc +5v, ±5% typical standby current 20ma 300 ma typical dvd read current (at max speed) 850 ma 950 ma typical cd read current (at max speed...

  • Page 76

    Appendix a: px-800 specifications 68 px-800a installation and users manual connector mode jumper master (default), slave, cable select (csel) dimensions and weight, px-800a internal atapi drive dimensions (w/h/d) ( excluding front bezel) 5.75" x 1.62" x 6.88" 146 mm x 41.3 mm x 175.0 mm weight host ...

  • Page 77

    Appendix a: px-800 specifications px-800a installation and users manual 69 safety, laser, and emc standards, px-800a internal atapi drive country/ region type agency standard safety ul ul 1950 usa laser fda 21cfr 1040.10 and 1040.11 canada safety csa csa 22.2 no. 950-00 safety ce en60950-1 iec60950-...

  • Page 78

    Appendix a: px-800 specifications 70 px-800a installation and users manual.

  • Page 79

    Appendix a: px-800 specifications px-800a installation and users manual 71 this page intentionally left blank..

  • Page 80

    Px-800 installation and users manual 72 appendix b: technical support store plextor’s e-mail, web site, phone, and fax numbers in a convenient location. Keep your drive’s serial number and a copy of your sales receipt handy as well. If you experience a problem while installing or operating your driv...

  • Page 81

    Appendix b: technical support px-800a installation and users manual 73 how to contact plextor technical support there are several ways for you to contact plextor’s technical support department: • visit our web site (www.Plextor.Com) for answers to frequently asked questions. • send us e-mail ( 88 te...

  • Page 82: Returns

    Appendix b: technical support 74 px-800a installation and users manual returns in the unlikely event that you need to return a drive to plextor, you need an rma (returned materials authorization) number. You will need this number before any plextor drive can be returned for replacement. Here’s how y...

  • Page 83

    Appendix b: technical support px-800a installation and users manual 75 if you did not receive a box (for example, your drive came pre-installed in a computer), we recommend you pay a packaging store (such as the ups store) to ship your drive. If you don’t have a packaging store in your area, ask for...

  • Page 84: Appendix C: Warranty

    Px-800 installation and users manual 76 appendix c: warranty plextor llc (“plextor”) warrants your px-800a drive against any defect in material and workmanship, under normal use, for a period of one year following its date of purchase. In the event this product is found to be defective within the wa...

  • Page 85

    Appendix c: warranty px-800a installation and users manual 77 all drives returned to plextor must be securely packaged and shipped postage prepaid. The drive will be returned to the customer at plextor’s expense when originating within the united states. For a drive originating outside of the united...

  • Page 86: Index

    Px-800 installation and users manual 78 index a access time · 63 achieving best performance, px- 800a · 21, 22 analog audio cable · 27, 32, 33 output connector · 9, 32, 33, 67 atapi command set · 68, 69 audio analog · 9, 67 digital · 33, 67 b bay cover panel · 28 black tray · 3 blue book · 57 box co...

  • Page 87

    Index px-800a installation and users manual 79 normal speed · 62 reading speed · 2 ultra speed · 62 writing · 39 writing speed · 2, 62 cd-text · 4 cleaning disc · 37 cleaning your drive · 43 precautions · 7, 43 closing tray · 37 compatibility cd-r · 4 cd-rw · 4 dvd · 3 dvd+r · 52 dvd+rw · 52 compute...

  • Page 88

    Index 80 px-800a installation and users manual writing speed · 61 dvd±r dl media · 34 drive capabilities · 34 dvd-r dl writing speed · 61 zero link · 3 dvd-ram cartridge not accomodated · 52 media · 35 reading speed · 2 set-top box and · 5, 35 write methods · 56 writing · 39 writing speed · 2, 61 wr...

  • Page 89

    Index px-800a installation and users manual 81 initialization time · 63 inquiry string px-800a · 68 installation · 34 examples · 21 px-800a · 8, 13, 23, 24, 27 interface · 4 atapi · 4 px-800a · 66 j jumper, mode · 10, 18, 67 l label, disc · 37 laser standards px-800a · 69 lossless linking · 3 m main...

  • Page 90

    Index 82 px-800a installation and users manual plug and play, support for · 3 position, mounting · 27, 38, 64 power cable · 18 connecting cable · 31 · 34, 69 connector, px-800a · 10, 66, 67 precautions · 6 primary ide port · 14 achieving best performance · 21, 22 cable connections · 31 configuration...

  • Page 91

    Index px-800a installation and users manual 83 s safety standards px-800a · 69 screws, mounting · 32 secondary ide port · 14 security sticker · 11, 34 selecting an ide configuration · 21 serial number, recording · 27, 34 shipping your drive · 11, 34, 74, 75 shock specification · 65 slave · 14, 21, 6...

  • Page 92

    Index 84 px-800a installation and users manual dvd-ram · 56 writing dvd-ram · 35 writing a cd image · 5, 66, 69 writing speed achieving · 35 cd-r · 2, 62 cd-rw · 2, 62 compatible · 53 dvd+r · 2, 61 dvd+rw · 61 dvd-r · 61 dvd-ram · 2, 61 dvd-rw · 61 high speed cd-rw · 35 ide/ata cable and · 10, 52 ma...

  • Page 93: Notes

    Px-800 installation and users manual 85 notes.

  • Page 94

    Plextor llc 48383 fremont blvd. Suite 120 fremont ca 94538-6509 phone: fax: e-mail: 510-440-2000 510-651-9755 info@plextor.Com www.Plextor.Com.