Pliant PHS-SB100 Operating Manual - page 5
Page 4
SmartBoom PRO Specifications*
Microphone
Microphone Type
Dynamic
Frequency Response
50–10,000 Hz
Mic Sensitivity
-58 dBV/Pa
Pattern
Cardioid
uni-directional
Output Impedance
200 Ω
Isolation from Headphone
40 dB
Speaker (Headphone)
Frequency Response
20–20,000 Hz
Nominal Impedance
100 Ω
Sensitivity at 1 kHz
Single
117 dB SPL/mW
Dual
121 dB SPL/mW
Speaker Type
Dynamic
Max Input Power
500 mW
Cables
Termination at Ear
Removable (Crossbolt)
Termination at Jack
4-pin XLR Female
Length
5.00 ft. (1.52 m)
Outside Diameter
0.24 in. (6.00 mm)
Physical Features
Mic Boom Length
8.50 in. (215.90 mm)
Weight (without cable)
Single
8.1 oz (229.63 g)
Dual
11.4 oz (323.18 g)
Cable
3.8 oz (107.73 g)
*Notice about Specifications: While Pliant makes every attempt to maintain the accuracy of the information contained in its
product manuals, that information is subject to change without notice. Performance specifications included in this manual
are design-centered specifications and are included for customer guidance and do facilitate system installation. Actual
operating performance may vary. Manufacturer reserves the right to change specifications to reflect latest changes in
technology and improvements at any time without notice.