Plinius 9100 Instruction Manual

Other manuals for 9100: Instruction Manual
Manual is about: Integrated amplifier

Summary of 9100

  • Page 1

    S t e r e o i n t e g r a t e d a m p l i f i e r.

  • Page 2

    2.

  • Page 3

    3 congratulations congratulations congratulations congratulations on your decision to become the proud owner of this plinius 9100 integrated amplifier. This manual has been prepared to help you understand the operation of your amplifier, and to provide information about its design and the variety of...

  • Page 4

    4 introduction ...................................................................................................................................Page 3 precautions ...................................................................................................................................Page...

  • Page 5

    5 please take special note of the following precautions before operating your new amplifier: • the plinius 9100 integrated amplifier can deliver in excess of 120 watts into 8 ohms. This amplifier is also capable of a very large peak current delivery. • the plinius 9100 integrated amplifier operates ...

  • Page 6

    6 record source volume x x x tuner vcr tape 1 tape 2 aux cd the front of the plinius 9100 integrated amplifier incorporates all the facilities you will require on a daily basis. Front panel layout sho front panel layout sho front panel layout sho front panel layout showing volume knob, reco wing vol...

  • Page 7

    7 on / off designed and manufactured in new zealand by audible technologies p.O. Box palmerston north right channel fuses left channel fuses serial no. Power consumption 50/ 60 350va voltage hz plinius 9100 integrated amplifier caution risk of electrical shock do not open caution: to reduce risk of ...

  • Page 8

    8 tape outputs tape outputs tape outputs tape outputs these rca outputs are situated next to the tape rca inputs, and are provided to interface to a pair of line level recording devices. The position of the record selector on the front panel determines from which device a recording is being made. As...

  • Page 9

    9 placemen placemen placemen placement and ventilation t and ventilation t and ventilation t and ventilation your plinius 9100 may operate at a moderately high temperature when being driven hard. The ideal location is upon a rigid stand, or floor mounted away from direct contact with any temperature...

  • Page 10

    10 it is important that you connect your loudspeakers (outputs) and source components (inputs) to the plinius 9100 integrated amplifier correctly to ensure the amplifier is not damaged, and sounds its best with your system. Now that you have read and familiarised yourself with the connections on the...

  • Page 11

    11 bi- bi- bi- bi-wiring wiring wiring wiring bi-wiring uses two pairs of loudspeaker cables for each channel loudspeaker. You will notice that the rear panel of your plinius 9100 has two pairs of output terminals for this purpose. When using bi-wires, always connect positive (+) to positive (+) and...

  • Page 12

    12 remote control remote control remote control remote control provided with your plinius 9100 is a three function remote control. The two buttons at the top of the remote adjust the volume level, and the button below switches the amplifier in and out of mute. Two aaa batteries power the remote, and...

  • Page 13

    13 mains/line fuse mains/line fuse mains/line fuse mains/line fuse a mains/line fuse is fitted within the iec socket on the rear of the amplifier. A small drawer at the bottom of this socket may be removed (after the iec plug is removed) by levering it out with a flat blade screwdriver. The fuse fit...

  • Page 14

    14 your plinius 9100 integrated amplifier is designed for use with high fidelity loudspeakers. It should not be used to operate with any other type of appliance or equipment. Choice of loudspeakers is one of personal taste, providing the chosen loudspeakers are suitable for use with your amplifier. ...

  • Page 15

    15 111120-watts rms per 20-watts rms per 20-watts rms per 20-watts rms per channel int channel int channel int channel into 8 ohms. O 8 ohms. O 8 ohms. O 8 ohms. Both channels dri both channels dri both channels dri both channels driven from 20hz to 20khz at le ven from 20hz to 20khz at le ven from ...

  • Page 16

    16 bi-wiring......................................................................................................................................Page 11 date of manufacture .......................................................................................................................Page 3 ...

  • Page 17

    17 all operational, technical and descriptive material published here is subject to change at any time without notice. For further product information or queries, please contact us at the address below. Plinius plinius plinius plinius products are designed and manufactured by: audible technologies l...