Plus bf-030s operation manual.
First of all, we would like to thank you very much for purchasing a plus board fax conference model. Please read this operation manual before using the machine to get the best performance out of the product. We recommend that you keep this manual for future reference. Features .........................
1 bf-030s board fax carton contents please be sure all of the following items are included in the carton with the bf-030s board fax board fax main unit ........... 1 accessories set of dry-eraseble markers (one each black, red and blue). Dry-eraser (1) fax paper (30m(96ft) , 12mm(w/1/2") core) opera...
2 rear front tray product features printer caster t-shaped stand expansion slot (for optional upgrades) optional accessory sold separately: pc interface board - to enable down- loading of board information from the bf-030s to the pc ( ) board screen 50mm 50mm gridded surface area operation panel pri...
3 opening button ............................. Press this button to open the printer hatch when replacing the thermal paper. Power switch ................................. Press "i" to turn on the power when starting machine operation. Power lamp .................................... Press the switch...
4 before use... How to use when copying... Cut-off recording paper when copying is completed, pull the tip of the recording paper upwards and cut it off with the edge of the outlet. When copying reduced two-surfaces: press two-surface reduction copy key. At this time the board screen slides forward ...
5 how to use when sliding the screen forward... Manual sliding it is also possible to slide the board screen manually. In this case, it can be slid in either direction; to the right and left. However, manual sliding at an excessively high speed must be avoided as it occasionally causes problems. Sli...
6 when a red line appears at the edges of the recording paper. The red line will appear when there is only about one meter (3 feet) or so of recording paper left on the roll. When the paper out lamp lights red. How to use note: please use only the correct type of recording paper. Particular attentio...
7 1. Avoid placing the machine in hot spots where it is exposed to direct sunlight or where an air conditioning duct. 2. When using sticky tape on the surface of the board screen, do not leave it on for a long time. Moreover, after removing it, wipe the screen clean. Do not hit or pierce the board s...
8 check list of simple failures handling precautions 7. When replacing recording paper, do not place any objects on the open printer cover or do not put your elbows on it. 8. After use, make sure to turn off the power switch. In addition, when it is not to be used for a long time, make certain that ...
9 specifications item specification board surface size w1300 h920 mm (51-3/16 36 inch) effective reading size w1240 h880 mm (48-7/8 34-3/4 inch) number of pages 2 pages screen driving method one direction endless drive grid 50mm squares writing instruments special markers (black/red/blue) reading me...
Plus corporation 3-b22, nakase 1-chome, mihama-ku, chiba 261-8501 japan phone: 043-296-3056 fax: 043-296-3025 telex: j22113 plusjim, cable plusjimuk tokyo.
