Plus BOARD FAX BF-035 Operation Manual

Other manuals for BOARD FAX BF-035: Installation Manual
Manual is about: BOARD FAX

Summary of BOARD FAX BF-035

  • Page 1

    Bf-035 plus board fax operation manual deutsch italiano français english español 中国語.

  • Page 2: Note:

    Note: this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipm...

  • Page 3: Plus

    Plus english bf-035 operation manual.

  • Page 4: Contents

    First of all, we would like to thank you very much for purchasing a plus board fax (electronic copyboard) conference model. Please read this operation manual before using the machine to get the best performance out of the product. We recommend that you keep this manual for future reference. Explanat...

  • Page 5: Features

    1 bf-035 board fax carton contents please be sure all of the following items are included in the carton with the bf-035 board fax copyboard main unit .......... 1 accessories ● set of dry-eraseble markers (one each black, red and blue). ● dry-eraser (1) ● fax paper (30m(96ft) , 12mm(w/1/2") core) ● ...

  • Page 6: Product Features

    2 rear front tray product features printer caster t-shaped stand expansion slot (for optional upgrades) optional accessory sold separately: pc interface board - to enable down- loading of board information from the bf-035 to the pc ( ) writing panel 50mm(2") × 50mm (2") gridded surface area operatio...

  • Page 7: Control Functions

    3 a opening button .............................. Press this button to open the printer hatch when replacing the thermal paper. B power switch .................................. Press "i" to turn on the power when starting machine operation. C power lamp ..................................... Press t...

  • Page 8: How to Use

    4 ■ before use... ● engage the caster locks to prevent board movement. ● plug in and turn on the power switch. ● turn on the power switch, and the panel will slide to show the first page. After blinking on and off 2-3 times, the power lamp remains lit. How to use ■ when copying... To remove printed ...

  • Page 9: How to Use

    5 how to use ■ when sliding the panel forward... Accessing the projection screen press the screen key to move to the projection screen. Press the key again to return to page 1. Press the page-r key to move to a specific page from the projection screen. ●page 5 is a projection screen, please do not w...

  • Page 10: How to Use

    6 as illustrated, set the new roll in so that the tip of thermal paper extends about 20cm (8") from the outlet. ● when a red line appears at the edges of the recording paper. The red line will appear when there is only about one meter (3 feet) or so of recording paper left on the roll. ● when the pa...

  • Page 11: Maintenance/how to Store

    7 1. Avoid placing the machine in hot spots where it is exposed to direct sunlight or next to an air conditioning duct. 2. When using sticky tape on the surface of the panel, do not leave it on for a long time. Moreover, after removing it, wipe the panel clean. Do not hit or pierce the panel with an...

  • Page 12: Trouble Shooting

    8 trouble shooting handling precautions 6. When replacing the thermal paper, do not place any objects on the open printer cover or apply weight to it. 7. After use, be sure to turn off the power switch. In addition, when it is not to be used for a long time, make certain that the plug is pulled form...

  • Page 13: Specifications

    9 specifications item specification board surface size w1300 × h920 mm (51-3/16 × 36 inch) effective reading size w1240 × h800 mm (48-7/8 × 34-3/4 inch) number of pages 5 pages (4 pages can be copied) screen the 5th page is a projection screen 1240 (50") × 880 (35") panel driving method bi-direction...

  • Page 14

    14-4146-01a.