1. DL manuals
  2. Plus
  3. Interactive whiteboard
  4. M-11
  5. User Manual

Plus M-11 User Manual

Manual is about: Copyboard with Memory Function

Summary of M-11

  • Page 1

    Thank you for your purchase of the plus copyboard. Please read this user’s manual carefully before use to take full advan- tage of the functions of this product. After you have finished reading the manual, please keep it for future reference. Copyboard with memory function m-11s/m-11w user’s manual.

  • Page 2

    E-2 this user’s manual covers both models m-11s and m-11w. The copyboard is available in a standard size (model m-11s) and a wide size (model m-11w). A printer and stand may be available as options depending on the product you purchase. Descriptions and diagrams refer to model m-11s. * model names w...

  • Page 3: Table of Contents

    E-3 table of contents meaning of the terms used in this manual • usb memory: refers to usb flash memory. • usb memory storage: means the saving of blackboard data using memory (i.E., the usb port) of the opera- tion panel. (the copyboard has 3 usb ports.) • internal memory: indicates a temporary sav...

  • Page 4: Features

    E-4 features stylish and functional design retaining the design of the existing m-10 series, the color has been changed to harmonize with the latest office environments. The operation panel and usb ports have been arranged at the right side to combine a clean-cut design and ease of use. The height o...

  • Page 5: Important Safety Information

    E-5 safety precautions heeding the safety precautions below will lengthen the product’s service life and prevent fires, electric shocks and injury. Read these safety precautions carefully and be sure to heed them. Handling the ac power adapter • do not connect any ac adapter other than the dedi- cat...

  • Page 6

    E-6 reflected light from the sheet surface the sheet surface of the main unit has a white glaze and when a projector or other optical equipment is projected, the reflected light could result in eye fatigue or other symptoms, so please be careful. Also note that the light emitted from laser pointers ...

  • Page 7

    E-7 cleaning • if the sheet is dirty, wipe it clean using a damp, thoroughly wrung out cloth. For tough dirt, apply some diluted neutral detergent to a cloth, wipe off the dirt, then wipe again to remove any detergent. Wait until the sheet is completely dry before using it. • do not wipe the copyboa...

  • Page 8: Package Contents

    E-8 copyboard, main unit [1] see “assembly and setup manual” for information about the assembly parts of the copyboard. Printer* [1] please see the instruction manual of the printer for informa- tion about the printer accessories. Stand* [1] *the printer and stand may be sold separately. Copyboard a...

  • Page 9: Names of The Parts

    E-9 names of the parts front frame cover sheet special markers are used on the sheet to draw diagrams and to write. Control panel (see page e-10) printer tray the printer* is placed here. Stand* this stand supports the copyboard. Pen tray main unit effective reading size the area that can be copied ...

  • Page 10

    E-10 names of the parts rear pr int er pc dc input connector connect this with the dc plug end of the ac power adapter. (see page e-13.) (only connect the supplied ac power adapter; nothing else.) personal computer (pc) dedicated usb port (type b) connect this with the usb port (type a) of the pc. (...

  • Page 11

    E-11 3 color mode lamp lights in green when “color” is selected with the color button. 4 + / − buttons (number of copies) pressing the + button or the − button sets the number of copies to be printed (to a maximum of 20 sheets). The number of copies appears in the display window. 5 display window th...

  • Page 12: Operation Steps

    E-12 operation steps the copyboard uses a ccd image sensor to read the diagrams and text that have been written down with spe- cial (4-color) markers, and accumulates the image data in internal memory. Pressing the print button prints out the sheet surface image data from the printer, and pressing t...

  • Page 13: Ac Power Adapter Connections

    E-13 1 2 3 printer pc ac power adapter connections to use the copyboard, connect the supplied ac power adapter. 1 connect the dc plug of the ac power adapter to the dc power connector of the copyboard. 2 connect the ac power cord to the ac power adapter. 3 plug the ac power cord into a ac power outl...

  • Page 14: Setting The Time

    E-14 setting the time number of copies print save feed/stop color density reprint memory on / standby the clock of the copyboard should be set correctly because the date and time (timestamp) is printed on the printer paper, and it is also recorded in the file information when saving. Press the on/st...

  • Page 15

    E-15 number of copies print number of copies print note • the factory default print timestamp is set to “enable (print).” if you do not wish to print the timestamp, use the setup utility in the supplied cd-rom and set to “disable (do not print).” see the “setup guide of the supplied software” on pag...

  • Page 16: Printing

    E-16 press the on/standby button and switch on the power. Note • press the on/standby button to switch on the power. The led of the dis- play window will light. When the drawing is on the rear sheet, press the feed/stop button to bring out the desired surface for printing. A press of the feed/stop b...

  • Page 17

    E-17 selecting the printing density select this when the density of the print is light. Press the density button and select dark- er or standard. Press the + button or the − button and select the number of copies. • when the power is switched on, one copy is selected. • a maximum of 20 copies can be...

  • Page 18

    E-18 printing in the same ratio as the sheet surface (model m-11) model m-11w is the wide type copyboard which will compress printing in the horizontal direction resulting in crowded printing of the a4 size sheet; for example, a circle will become an ellipse. To print in the same aspect ratio as a d...

  • Page 19: Using Usb Memory

    E-19 press the on/standby button and switch on the power. Note • press the on/standby button to switch on the power. The led of the display window will light. Insert the usb memory device into the memory port (usb port) of the copyboard • insert the usb memory device with the access indicator facing...

  • Page 20

    E-20 press the color button and select color or black & white. • when the power is first switched on, color/black & white is selected automatically. Press the save button to store • the reading operation is performed for a one-sheet portion (while the sheet is scrolled) and usb memory storage starts...

  • Page 21

    E-21 drag to my documents saving image files to a personal computer, and deleting image files examples of operations follow for saving the image files in the usb memory device to the hard disk of the personal computer, and for deleting the folder when the usb memory capacity is full. (there are vari...

  • Page 22

    E-22 deleting usb memory image files with the computer before deleting important image files, be sure to save them on the computer (as a data backup). 1. Open “my computer” and then open the drive icon which shows memory card. The folder named “m-11” contains the memory storage data of the copy-boar...

  • Page 23: Printer Operation Guide

    E-23 a printer is used to print the content of what has been drawn on the sheet surface. Depending on the printer, the operation may differ and the names of the parts may be different. Please see your printer instruction manual for details. Printer set up please check that the copyboard and the prin...

  • Page 24

    E-24 software contents and overview • usb driver this driver software makes the computer recognizes the copyboard as an external device when there is a usb connection. Be sure to install this usb driver when connecting the pc dedicated usb port with the computer. • twain driver this drive is used to...

  • Page 25

    E-25 printer pc turn on the copyboard’s power and connect it to the computer using the usb cable. Use the supplied (or a commercially available) usb cable to connect the pc dedicated usb port on the bottom of the copy- board with the usb port of the computer. Installing the usb driver when connectin...

  • Page 26

    E-26 specify “d:\m11usb” (d is the designation of the cd-rom drive) in the text box and click the “next” button. Once the driver is found, click the “next” button. Once installation of the usb compatible device’s driver is complete, click the “end” button. This completes the installation. Perform th...

  • Page 27

    E-27 acquiring images of the copyboard directly by the computer start the reading operation of the copyboard from the computer side, and send directly to the computer the image data that has been read. This will allow display and printing. To make use of this function, install the sup- plied “plus i...

  • Page 28

    E-28 click the “save to pc” button of the on-screen control panel. The sheet of the copyboard will scroll and reading will begin. When reading is completed, the image of the sheet surface that has been read will be displayed on the computer screen. Notice • do not drag the on-screen control panel du...

  • Page 29

    E-29 disconnecting usb connections with the main unit perform the usb device disconnection procedure at the computer side before disconnecting the usb cable between the main unit and the computer. The disconnection operation will differ depending on the operating system (os) of the computer. See the...

  • Page 30: Meaning of Error Messages

    E-30 meaning of error messages number of copies print save feed/stop color density reprint memory on / standby if any of the following flashing indications appear in the display window of the control panel, please check the matters described below. The flashing will continue for 5 seconds. Error mes...

  • Page 31: Troubleshooting

    E-31 troubleshooting please check the following matters before making a request for servicing. Condition please check cop yboar d related pressing the on/standby button does not switch on the power. • check whether the cable of the ac power adapter is disconnected from the dc connector of the copybo...

  • Page 32: Specifications

    E-32 specifications board type (model name) standard (m-11s) wide (m-11w) form installation method self-standing (t-shaped legs), or wall mounting external dimensions (t-shaped legs*¹) w1470 × d700 × h1970 (max) mm w1970 × d700 × h1970 (max) mm main unit weight 26.0 kg (excluding printer) 30.0 kg (e...

  • Page 33: Appendix

    E-33 printer pc appendix * the printer is an option. * appearance of printer is for illustration purposes. Connections between copyboard and printer the installation method at the printer side will differ depending on your printer. (1) connect the copyboard’s printer connector with the printer’s usb...

  • Page 34

    E-34 caution please have 2 or more persons hold the unit. If the unit is dropped or falls over, this could cause unexpected injury. Changing the height of the unit this is the height adjustment when setting up the copyboard on the optional stand. The stand height can be adjusted to 3 levels in 100 m...