PNI ESCORT HP 8024 ASQ User Manual - 5. Standard Change
2
5. Standard change
To change the working standard of the radio follow the next instructions:
• When the radio is off, press the Down button simultaneously and PTT on
the microphone and then turn on the station, keeping the buttons pressed.
• Use up and down buttons on the front panel of the radio to select the
desired standard
• Turn the radio off and on again
To check the current standard use the same procedure.
Available standards: CE > -9 > -A > -b > -C > -d > -E > -F > -p > -n
• CE: 26.965 - 27.405 MHz FM only
• 9: 26.965 - 26.955 80 channels AM FM (Germany)
• A: 25.615 - 26.055 MHz
• b: 26.065 - 26.505 MHz
• C: 26.515 - 26.955 MHz
• d: 26.965 - 27.405 MHz
• E: 27.415 - 27.855 MHz
• F: 27.865 - 28.305 MHz
• p: 26.960 - 27.400 MHz
• n: 26.330 - 26.770 MHz AM FM
6. Usefull tips
• Do not invert power polarity
• Do not replace the fuse with a bigger one. The default is 2A.
• Do not transmit without an antenna connected, you risc damaging the
device.
• Set the SQ and ASQ at the limit of the background noise.
• Do not cut cigarette lighter socket, because it contains inside safety
protection
7. Legal frequencies and transmiting powers in Europe
Italy 40CH AM/FM 4 watt