Pocsag PG-2092P User Manual - page 7
PG-2092P USER MANUAL VER:1.0 7 OF 11
time page of the message have not been read).
3) All messages have been read and locked.
4.4. Deleting message selectively
In order to delete messages selectively, please press Function Key twice while reading
unlocked messages. Then “DELETE” indication appears as follow.
Press Setting / Selection Key
to confirm the deletion.
4.5. Turning off the pager
Press Function Key to display:
You can press Function Key
two or three times to get to “PAGER OFF?” function menu
and then press Setting / Selection Key
to turn off the pager. The pager cannot receive
messages when in the off mode. You can press Read / Exit Key
once again to turn on
the pager if it is in turned-off state.
4.6. Setting time
◆ Press Function Key
to display:
1) Press Setting / Selection Key
to come into the menu and to move cursor from one position
to another. The order is [HH—>MM—>A / P—>12Hr/24Hr ]
2) Press Function Key
to adjust the digit to the current time.
◆ You can repeat step 1 and 2 to adjust it to correct time.
◆ Press Read / Exit Key
to confirm and exit.
4.7. Setting date
◆ Press Function Key
to display:
Press Setting / Selection Key
to come into the menu.
Press Setting / Selection Key
to move the cursor from one position to another. The order
is [MM—DD—YY] or [DD—MM—YY] and it is decided by the code programming.
Press Function Key to adjust the digits.
Press Function Key to adjust the digit in every position.