PodSpeakers MiniPod Bluetooth User Manual - Power
POWER
1. Connect the power cable to the bottom of your MiniPod Bluetooth and to your wall outlet.
2. Power ON your MiniPod Bluetooth either by pressing the /Mode button on the speaker,
or by using the -button on the remote control. As default, MiniPod Bluetooth will be in
Bluetooth mode when powered on.
You are now ready to finalize the setup depending on how you want to use your MiniPod
Bluetooth.
NOTE: If your MiniPod BT has not played back audio for 5 minutes, it will automatically go to
Network Standby mode, to minimizing power consumption. This is according to EU regulations.
Power consumption in Network Standby mode is below 1.1W.
NOTE: All Wireless communication can be disabled (or enabled again) by pressing and
holding the 2 buttons (BT Pairing and Stereo Pairing) simultaneously for 8 seconds. This is a
mandatory feature according to EU regulations.
Power on the MiniPod Bluetooth
6