© copyright poindus systems 2012 p1 / 38 vfd manual version v2.0 feb. 2012.
© copyright poindus systems 2012 p2 / 38 copyright 2012 all rights reserved manual version 2.0 the information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of mercha...
© copyright poindus systems 2012 p3 / 38.
© copyright poindus systems 2012 p4 / 38.
© copyright poindus systems 2012 p5 / 38 index 1. Features ............................................................................................................................................. 6 2. General specifications ..........................................................................
© copyright poindus systems 2012 p6 / 38 1. Features 1.) data can be displayed on 20 columns x 2 lines. 2.) green color and large character are easy to eyes. 3.) the display panel is adjustable to provide the best view angle. 4.) the vfd utility setting emulates commands mode, baud rate and internat...
© copyright poindus systems 2012 p7 / 38 3. Component dimensions and assembly.
© copyright poindus systems 2012 p8 / 38 4. Interface 4.1. Rs232 interface specification data transmission serial synchronization asynchronous signal level mark = -3 to –15 v (logic “1”) space = +3 to +15 v (logic “0”) baud rates 4800,9600,19200,38400 bps parity none, even, odd bit length 7 or 8 bit...
© copyright poindus systems 2012 p9 / 38 5. Software status setting commands when the device is power on, it will read the eeprom setting to set the command type, baud rate, parity, data length, demo mode and international character. User can re-set the software status setting commands as following,...
© copyright poindus systems 2012 p10 / 38 5.4. International character set setting command.
© copyright poindus systems 2012 p11 / 38 5.5. Select international character set command 5.6. Select character code table command.
© copyright poindus systems 2012 p12 / 38 5.7. Command type setting command 5.8. Run demo message 5.9. Show firmware version.
© copyright poindus systems 2012 p13 / 38 5.10. User-define character command set.
© copyright poindus systems 2012 p14 / 38 6. Command list table.
© copyright poindus systems 2012 p15 / 38.
© copyright poindus systems 2012 p16 / 38 7. Command details 7.1. Pos7300 series command list.
© copyright poindus systems 2012 p17 / 38.
© copyright poindus systems 2012 p18 / 38.
© copyright poindus systems 2012 p19 / 38 7.2. Cd5220 standard mode command list.
© copyright poindus systems 2012 p20 / 38.
© copyright poindus systems 2012 p21 / 38.
© copyright poindus systems 2012 p22 / 38 7.3. Utc standard mode command list 7.4. Utc enhanced mode command list.
© copyright poindus systems 2012 p23 / 38 7.5. Aedex/emax mode command list 7.6. Adm787/788 mode command list.
© copyright poindus systems 2012 p24 / 38 7.7. Dsp800 mode command list.
© copyright poindus systems 2012 p25 / 38 7.8. Epson esc/pos command list.
© copyright poindus systems 2012 p26 / 38.
© copyright poindus systems 2012 p27 / 38.
© copyright poindus systems 2012 p28 / 38 8. Character set 8.1. Character code 20h-7fh.
© copyright poindus systems 2012 p29 / 38 8.2. Character code 80h-ffh.
© copyright poindus systems 2012 p30 / 38.
© copyright poindus systems 2012 p31 / 38.
© copyright poindus systems 2012 p32 / 38.
© copyright poindus systems 2012 p33 / 38.
© copyright poindus systems 2012 p34 / 38.
© copyright poindus systems 2012 p35 / 38.
© copyright poindus systems 2012 p36 / 38 appendix a – command details.
© copyright poindus systems 2012 p37 / 38.
© copyright poindus systems 2012 p38 / 38 appendix b – control code set.