Polar Electro Cadence Sensor W.I.N.D User Manual

Manual is about: Polar Electro Cadence Sensor W.I.N.D Cycling computer User Manual

Summary of Cadence Sensor W.I.N.D

  • Page 1

    Cadence sensor w.I.N.D. User manual.

  • Page 2: Product Elements

    Polar cadence sensor w.I.N.D. Is designed to measure cadence, i.E. Crank revolutions per minute when cycling. No other use is intended or implied. Please follow the pictures on the front cover. Product elements 1. Bike mount and cycling computer (picture 1 a) 2. Cadence sensor (picture 1 b) 3. Caden...

  • Page 3: Cadence Sensor Teaching

    The gap is correct when you can fit a cable tie between the magnet and the sensor. There is a small caved dot at the backside of the sensor, which indicates the spot the magnet should be pointing at when passing the sensor (picture 4). 6. Rotate the crank to test the cadence sensor. The flashing red...

  • Page 4: Care And Maintenance

    To return to time mode, press and hold the back button. Care and maintenance keep the cadence sensor clean. Clean it with a mild soap and water solution, and rinse off with clean water. Dry it carefully with a soft towel. Never use alcohol or any abrasive material, such as steel wool or cleaning che...

  • Page 5

    • if the 0 reading appears irregularly, this may be due to temporary electromagnetic interference in your current surroundings. • if the 0 reading is constant, you may have exceeded 3000 riding hours and the battery is empty. … check cadence is displayed? • make sure your cadence sensor is positione...

  • Page 6: Technical Specification

    Technical specification operating temperature: -10 ºc to +50 ºc / +14 ºf to +122 ºf battery life: average 3000 riding hours accuracy: ±1 % material: thermoplastic polymer water resistance: splash proof limited polar international guarantee • this limited polar international guarantee is issued by po...

  • Page 7

    This product is compliant with directive 93/42/eec. The relevant declaration of conformity is available at www.Support.Polar.Fi/declaration_of_conformity. This crossed out wheeled bin marking shows that polar products are electronic devices and are in the scope of directive 2002/96/ec of the europea...

  • Page 8: Disclaimer

    Disclaimer the material in this manual is for informational purposes only. The products it describes are subject to change without prior notice, due to the manufacturer’s continuous development program. Polar electro inc./polar electro oy makes no representations or warranties with respect to this m...

  • Page 9

    Manufactured by polar electro oy professorintie 5 fin-90440 kempele tel +358 8 5202 100 fax +358 8 5202 300 www.Polar.Fi.